Best Bottoming Tap Sets

Airpro Fork SBK-103 Snowbike Bottoming Kit

Standard snowbike setups weigh 65 to 85 pounds more than a stock dirt bike (BEFORE you add racks, packed snow, spare gas, etc), which can lead to violent bottoming and bent lower fork tubes..
The AirPro allows riders to add 8-15 PSI to a spring fork, significantly increasing bottoming resistance and ride height..
This accessory provides a low cost option for riders to achieve great results while using independently, or in conjunction with a front fork revalve/respring (depending on rider skill level)..
Add 8-15 PSI to significantly improve bottoming resistance and increase ride height.
Fraction of the cost of re-spring/re-valve.

Check Stock

Muzerdo 115PCS Sae and Metric Bearing Steel Tap and Die Rethreading Kit with Metal Box

Wrenches – All tap and die bits need to be mounted in a wrench. Broadly speaking, they are all roughly the same, with a few notable exceptions. The tap wrench from Muzerdo, is the best on the market..
Construction Material – Steel is the base metal used in the construction of these sets – but not all steel is created equally! Look for steel alloy or, even better, Titanium tipped cutting surfaces. The better the metal the tougher the tap and die so they so they can cut into more.
Metric/SAE – The size of the tap and die is also important. Metric is of course the European measurement system, SAE are based on US sizes (so use inches instead of millimeters). This is important as you may struggle to use a SAE tap and die set on a vehicle with metric measurements. If the car is made in the US, it probably uses SAE measurements. If it is a European carmaker, it’s probably the opposite. If can look for a set with dual Metric and SAE compatibility of course then you don’t have t.
Metal Storage Case – More than with many other types of tools, the storage case is an important part of the tap and die set. Frankly, because these sets can come with multiple parts, you do want a case that is well designed to keep all the li....

Check Stock

Tusk Billet WP Fork Adjuster Knobs Blue For KTM 350 SX-F 2017-2022

Standard snowbike setups weigh 65 to 85 pounds more than a stock dirt bike (BEFORE you add racks, packed snow, spare gas, etc), which can lead to violent bottoming and bent lower fork tubes..
The AirPro allows riders to add 8-15 PSI to a spring fork, significantly increasing bottoming resistance and ride height..
This accessory provides a low cost option for riders to achieve great results while using independently, or in conjunction with a front fork revalve/respring (depending on rider skill level)..
Add 8-15 PSI to significantly improve bottoming resistance and increase ride height.
Fraction of the cost of re-spring/re-valve.

Check Stock

ATOPLEE Spiral Point Plug Threading Tap ,5pcs HSS 6542 Titanium Coated Metric Right Hand Thread Taps,M3-M8

Wrenches – All tap and die bits need to be mounted in a wrench. Broadly speaking, they are all roughly the same, with a few notable exceptions. The tap wrench from Muzerdo, is the best on the market..
Construction Material – Steel is the base metal used in the construction of these sets – but not all steel is created equally! Look for steel alloy or, even better, Titanium tipped cutting surfaces. The better the metal the tougher the tap and die so they so they can cut into more materials and they will stay sharper for longer..
Metric/SAE – The size of the tap and die is also important. Metric is of course the European measurement system, SAE are based on US sizes (so use inches instead of millimeters). This is important as you may struggle to use a SAE tap and die set on a vehicle with metric measurements. If the car is made in the US, it probably uses SAE measurements. If it is a European carmaker, it’s probably the opposite. If can look for a set with dual Metric and SAE compatibility of course then you don’t have t.
Metal Storage Case – More than with many other types of tools, the storage case is an important part of the tap and die set. Frankly, because these sets can come with multiple parts, you do wan....

Check Stock

Union Butterfield 3306E(UNC) High-Speed Steel Thread Forming Tap, Extra-Long, Uncoated (Bright) Finish, Round Shank With Square End, Bottoming Chamfer, H5 Tolerance, 6\ O'all Length, 3/8\-16 Thread Size

Cold-forms threads in through holes and blind holes without producing chips.
Extension Rol-Form tap is extra-long for extended reach, with lubricant grooves to improve coolant flow.
Bottoming chamfer for threading the bottoms of blind holes.
Available in UNC (Unified Coarse) or UNF (Unified Fine) right-hand thread options for different applications.
High-speed steel for compatibility with a variety of materials.

Check Stock

IRWIN Tools Metric Tap and Hex Die Set, 41-Piece (26317)

We're working with a variety of tradesmen to solve endless fastening challenges: Irwin Hanson Taps and Dies are the answer. Whether creating new tools from raw steel or repairing damaged and worn threads, achieving a precise fit is essential.
Irwin Industrial Tools sets the standard for delivering quality every step of the way in your threading applications.
TR-88 adjustable handle tap wrench, TR-73 two-in-one tap wrench, TR-50 2-in-1 tap wrench.
18 leaf standard thread pitch gauge and screwdriver.

Check Stock

TESCAMP Camping Mattress ONLY for Tesla Model Y CertiPUR Memory Foam Car Mattress Storage Bag & Sheet Provided Portable Foldable Space Saver in Car Sleeping Twin Size

Comfy Queen Guest Mattress: Your Memory Foam Mattress folds out to give your guests a comfy Queen-sized floor mattress that supports without bottoming....
Tri-Fold Futon & Floor Mattress: Our space-saving Queen-sized mattress lets you avoid clunky futons.
In 2 simple moves your Queen sized mattress sets....
Travel & Camp Mattress: Travelers use our camp mattress to stay warm and comfy on cold bumpy ground.
The 60x80 inch size fits nicely into tents and....

Check Stock

Braylin 150Pcs Mechanical Keyboard Silicone O-Ring Ultra-Quiet Switch Dampener, for Cherry MX Key Switch Keyboards Dampers

150Pcs Rubber O-Rings: Made of silicone material, aim to reduce the 0.2mm travel distance of the mechanical keyboard switches, limit the noise from bottoming out keys, increase key speed by reducing actuation distance..
Support Most Keyboard: These o-rings are soft. They perfectly work with your mechanical keyboard. Different from rubber, silicone material is with better resistance to cracking and more comfortable pressing feedback, which can also help with finger fatigue during long-time typing..
Ergonomic Soft O-Ring: The softer O-rings provide a softer padded landing with every keystroke that reduces the impact on your fingers and eliminates the bottoming out “clack” sound..
Reduces Key Stroke Sounds: The O-rings reduce the bottoming out “click” sound as keys hit the base of the keyboard, great for voice chat. This does not affect the “click” noise from the switches..
Braylin’s Keyboard O-Ring can effectively prevent the air leak, have good sealing effect. We have 4 colors for you to choose, Black/Clear/Blue/Red..

Check Stock

Akko CS Switches, 3 Pin 43gf Linear Switch Compatible for MX Mechanical Keyboard (45 pcs, Rose Red)

Akko CS Switch Series - Akko Custom Series (CS) switches are 3-pin custom switches made for DIY enthusiasts to obtain satisfying typing feelings with more affordable options..
Rose Red 43gf Linear Switch – With a light actuation force of 43gf, Akko rose red switches are more responsive than Akko pink switches. With a 3.5mm prolonged stem, the switches produce a lighter and yet crisp sound when bottoming out..
Built-in LED Slot – Akko CS switches are equipped with LED slot ready for LED Mod/Assembly, and are SMD compatible (LED underneath the switch) ..
Durability - Approximate lifespan of 60 million times of keystrokes based on laboratory durability test..
Compatibility – Akko CS switches come with MX style structure so they would fit most keycap sets with (X) cross stem. Note: switch opener is not included..

Check Stock