Best Both Disc Brake

ATPEAM 24PCS Disc Brake Caliper Tool Set Wind Back Tool Kit for Brake Pad Replacement Reset

  • Easy Operation: For brake pad replacement and rotating pistons back into the caliper on your car, truck or 4-wheel drive disc brake vehicle. Includes both right-handed and left-handed thrust bolt assemblies..
  • Durable Material: Carbon steel construction with a rust-proof blasted finish, these blades will stand up to heavy use and accidental drops. It’s perfect for everyone from DIY novices to professional mechanics..
  • Wide Application: This multi-disc brake caliper wind back tool kit includes 18 adapters fitting hundreds of vehicle makes and models including American, European, and Japanese.
  • Package Included: 18 x Disc Adapters (#0, #2, #3, #4, #5, #6, #7, #8, #9, #10, #A, #E, #F, #K, #K1, #K2, #M, #N).
  • 2 x Handed Thrust Bolt Assemblies (Left & Right).
  • Blue Blow Mold Case: The Disc Brake Piston Caliper Compressor Rewind Tool Set is packed in a heavy-duty, blow-molded case with precision-sized compartments for every piece - great for storage and transport while lengthening the life of the tool set..
Check Stock

CNC Mountain Bike V Brake Set, Bicycle V Brake for Front/Rear，1Pair

  • 【Braking System】：Two hydraulic bike brake pads clamp the disc rotor to brake, the rotor will not move while ensures great performance. One-way hydraulic brakes for mountain bike system is to brake by pushing aside the rotor which is easy to make the rotor deformed..
  • 【Adjust Tightness】: Front /Rear bicycle hydraulic disc brake caliper are made of premium aluminum material with oil cylinder driven two -way brake pad clamp . MTB hydraulic disc brakes with internal fine-tuning screws can be used to adjust the tightness of the brake inner wire to achieve the desired bicycle hydraulic brake feel..
  • 【Upgrade Design】: HB-100 hydraulic bike brakes uses a new hydraulic line pull clamp technology. The block of the HB-100 mechanical disc brake caliper is equipped with built-in brake oil, and then the brake clamp is used to control the bicycle disc brake kit conversion of the hydraulic clamp. The cylinder of the clamp is built-in brake oil..
  • 【Application Bikes】: Lining Pulled Hydraulic Disc Brake Suitable for mountain E-Bike,bikes, road bikes and folding bikes, MTB, scooter, fat bike..
  • 【Note】: Hydraulic disc brake adapter. Please do not remove the yellow pad before installation, and pinch the brake lever, otherwise it will cause oil leakage or sc....
Check Stock

ATPEAM 24pcs Heavy Duty Disc Brake Caliper Tool Set and Wind Back Kit for Brake Pad Replacement

  • Durable Material: Carbon steel construction with a rust-proof blasted finish, these blades will stand up to heavy use and accidental drops. It’s perfect for everyone from DIY novices to professional mechanics..
  • Easy Operation: For brake pad replacement and rotating pistons back into the caliper on your car, truck or 4-wheel drive disc brake vehicle. Includes both right-handed and left-handed thrust bolt assemblies..
  • Package Included: 18 x Disc Adapters (#0, #2, #3, #4, #5, #6, #7, #8, #9, #10, #A, #E, #F, #K, #K1, #K2, #M, #N).
  • 2 x Handed Thrust Bolt Assemblies (Left & Right).
  • Wide Application: This multi-disc brake caliper wind back tool kit includes 18 adapters fitting hundreds of vehicle makes and models including American, European, and Japanese.
  • Black Storage Case: The Disc Brake Piston Caliper Compressor Rewind Tool Set is packed in a heavy-duty, blow-molded case with precision-sized compartments for every piece - great for storage and transport while lengthening the life of the tool set..
Check Stock

21PC Universal Disc Brake Caliper Piston Pad Car Auto Wind Back Hand Tool Kit

  • This tool kit allows you to rewind the pistons in brake calipers by hand without damaging the gaskets in the pistons. It does this by allowing the rotation of the piston at the same time as pushing the piston back into the caliper..
  • This set includes both right and left hand threaded rewind tools 2 pin fixed drives 17 adaptors which fit a variety of modern cars Complete with sturdy blow molded case for storage and ease of transportation.
  • This kit enables the rewinding of pistons back into the core on most disc brake calipers this allows you to service and replace worn brake pads on both wind back and push back type brakes.
  • Color: Gray Dimensions: (13.18 x 2.75 x 9.25)" / (33.5 x 7 x 23.5)cm (L x W x H) Weight: 88.89oz / 2.52kg Quantity: 21 Pcs Adaptable Car: Universal.
  • Package Includes: 1 x 21pcs Disc Brake Caliper Wind Back Tool Kit 1 x User's Manual.
Check Stock

PETCHOR HB-100 Line Pulling Hydraulic Disc Brake Calipers Mechanical Disc Brakes for MTB Mountain Bike E-bike and Electric Bike 2PCS Front/Rear Gold

  • 【Braking System】：Two hydraulic bike brake pads clamp the disc rotor to brake, the rotor will not move while ensures great performance. One-way hydraulic brakes for mountain bike system is to brake by pushing aside the rotor which is easy to make the rotor deformed..
  • 【Adjust Tightness】: Front /Rear bicycle hydraulic disc brake caliper are made of premium aluminum material with oil cylinder driven two -way brake pad clamp . MTB hydraulic disc brakes with internal fine-tuning screws can be used to adjust the tightness of the brake inner wire to achieve the desired bicycle hydraulic brake feel..
  • 【Upgrade Design】: HB-100 hydraulic bike brakes uses a new hydraulic line pull clamp technology. The block of the HB-100 mechanical disc brake caliper is equipped with built-in brake oil, and then the brake clamp is used to control the bicycle disc brake kit conversion of the hydraulic clamp. The cylinder of the clamp is built-in brake oil..
  • 【Application Bikes】: Lining Pulled Hydraulic Disc Brake Suitable for mountain E-Bike,bikes, road bikes and folding bikes, MTB, scooter, fat bike..
  • 【Note】: Hydraulic disc brake adapter. Please do not remove the yellow pad before installation, and pinch the brake lever, otherwise it will cause oil leakage or sc....
Check Stock

OEMTOOLS 25265 Disc Brake Pad Spreader | Replace & Install Brake Pads | Tool Compresses Inner Brake Pads and Resets Caliper Pistons | Good for Cars and Light Trucks | Rust Resistant | Easy to Use

  • BRAKE PAD REPLACeMENT is a Lot Easier with the OEMTOOLS Disc Brake Pad Spreader - it's Great for Compressing Inner Brake Pads and Resetting Pistons.
  • IT'S IDEAL for Tight Areas Where C-Clamps Won't Work.
  • IT CAN BE USED on Cars and Light Trucks (both Domestic and Import).
  • IT RESISTS CORROSION with its High Carbon Steel and Chrome Vanadium Steel Construction and its 2-Piece Design Provides Added Strength.
  • EASY TO TURN - its Design Includes a Large Knob and Fine Thread DriverDescriptionThis OEMTools Disc Brake Pad Spreader is perfect for compressing inner brake pads and resetting pistons for easy pad replacement! Also, this OEMTools Disc Brake Pad Spreader works great in tight areas where C-Clamps cannot! Constructed from high carbon steel and high quality chrome vanadium steel for strength durability and resistance to corrosion. Large Knob for Easy Turning.
Check Stock

For Stainless Steel Brake Disc Rotor Screws 93600-06014-0H (10 Pack)

  • Includes (10) Stainless Steel Brake Disc Rotor Screws.
  • For use on front & rear brake disc rotors (left, right).
  • Includes 2 sizes to fit both older & newer vehicle models.
  • Premium stainless steel screws guarantee to never rust.
Check Stock

Farbetter Bike Disc Brake Kit Including Front and Rear Caliper 160mm Rotor Mechanic Tool-Free Pad Adjuster for Mountain Bike Road Bike Fixed Gear Bike MTB BMX Red

  • Brake System: Mechanical Disc Brake System with 2 x 160mm Rotor, 1 x Front Brake Caliper.
  • 1x Rear Brake Caliper, 1x Rear Brake Cable, 1x Disc Rotor Adjuster, and 12 X Disc Brake Rotor Screws..
  • High-quality materials: Brake Calipers Include XTR Disc Brake Pads, braking sensitive and quiet, high temperature resistance. Reinforced disc brake base design, high strength and anti-breaking..
  • Dimension: IMD international dimension, front caliper for 160/180mm rotor, rear caliper for 140/160mm disc. Extra Gadgets-Disc Rotor Adjuster, help you to adjust the gap between rotor and caliper easily..
  • Ideal Replacement: with fine workmanship, is your bicycle ideal upgrade parts, and packed in a box to presented in the original for you..
  • Widely Compatible: Suitable for most Mountain Bike, Road Bike Mechanical Disc Brake System..
Check Stock

ABN Ratcheting Caliper Piston Tool – 4 in 1 Disc Brake Caliper Compression Tool Universal Brake Caliper Spreader Tool

  • BRAKE CALIPER PISTON TOOL: Use the ABN Ratcheting Brake Caliper Compressor Tool to compress pistons quickly and easily into the calipers.
  • Disc brake pad spreader tool creates a larger space between the caliper cavity to make room for newer and thicker brake pads.
  • Quad and dual piston brake caliper tool comes pre-lubricated to protect against oxidation.
  • It is suggested to lubricate between uses.
  • 4 IN 1 TOOL FITS YOUR VEHICLE: Disc brake caliper tool set includes 2 sets of piston plates that spread from 1-9/16 to 2-3/8 inches (2.5 to 5.1 cm) to allow plenty of room to install new brake pads.
  • Use as a single piston caliper tool, a dual piston caliper tool, a quad piston caliper tool, and a rear brake caliper tool.
  • This versatile caliper piston compressor tool is ideal for cars, trucks, and some commercial vehicles.
  • Works on both fixed and floating calipers.
  • RATCHETING ACTION: Brake piston compression tool provides a 360-degree swing that allows you to keep the compression plates in place while you lever the handle back and forth to spread or retract the plates.
  • Centrally located ratchet screw creates even force when compressing pistons to ensure proper alignment and to prevent damage to your brake components.
  • Reverse tool movement to retract compression p....
Check Stock