Best Boring Bar With External Thread

YG-1 P15202 Spade Drill Straight Shank Holder, Straight Flute, 0.318\ Shank Diameter, 31/32\-1-3/8\ Drill Insert Range

  • ☞This product is the main accessory of coordinate boring machine, horizontal boring machine, ordinary boring and milling machine, boring and milling CNC machine tools. It can be used for boring, boring outer circle, boring end face, boring stepped hole, boring inner hole end face, cutting inner hole and ring groove on outer circle, etc..
  • ☞Precise control and free adjustment: The scale of the dial is clear, and the circle is divided into 100 equal parts. The movement of each scale is 0.005mm, the diameter is 0.01mm, and the operation is simple..
  • ☞Select material with high hardness. Using 40CrMo material, it has strong rigidity, special surface treatment, high hardness, good seismic performance, suitable for high speed, and guarantees the density of hole processing..
  • ☞The boring range of the complete set of boring tools: 10-150mm, and the diameter of the boring tool bar is 50mm. Precision fine-tuning: 0.01mm (one revolution of 0.02mm), adjustable stroke 20mm. The boring bar easily and directly enters the boring head hole..
  • ☞The refined boring bar is made of alloy steel, which has strength and toughness, good hardenability, and no obvious temper brittleness. After quenching and tempering, it has obvious impact resistance. The taper design of the b....
Check Stock

220V Self Priming Water Pump Pressure Switch Automatic Pressure Controller Black

  • ...pressure gauge has a clear surface and accurate reading, it can provide accurate readings in the range of 1 to 100 psi and 0 to 7 bar for pumps, it is equipped with a 2 inch dial, is a practical tool for detecting water pressure.
  • Reliable material: this pump pressure gauge and 1/4 inch NPT internal thread x 1/2 inch external thread joint are made of brass, not easy to wear, comfortable texture, durable, the surface of this gauge is made of plastic which allows you to see clearly to the reading and pressure range, and use the tape when installing the pressure gauge to prevent leakage.
  • Brass fitting size: NPT thread size is the correct size and does not represent the actual diameter, 1/4 inch NPT internal thread x 1/2 inch external thread brass fitting can be applied to connect the pressure gauge, it is ideal to use the tape to make installation more stable.
  • Applicable occasions: this pump pressure gauge, brass fitting and tapes can be applied for brass, steel and hoses, suitable for swimming pool filters, swimming pool equipment, spas and any other water systems, practical and useful to use.
Check Stock

OSCARBIDE 5/8”Shank 9 Pieces/Set Indexable Carbide Lathe Turning Tool Holder and Boring Bar,CNC Heavy-Duty Nickel Plated indexable Insert Holders for Turning Grooving Threading Cut Off

  • 5/8” Metal lathe cutting tools includes 1pcs External Parting&Grooving Tool Holder QA10R-30 , 6pcs External Turning tool holder SCBCR,SSSCR,SCLCL,SCLCR,SWGCR,SDNCN ,1pcs SER External Threading Tool Holder,1 pcs S10R-SCLCR Boring Bar.
  • Turning Holders are made of high quality steel with Nickel Cotated, which are more durable moistureproof, dust-proof than general lathe tool holder.
  • Cutters bits are made of carbide with Tin-coated,with positive rake cutting angle and built-in chip breaker for general purpose cutting action.
  • Metal Lathe tools suitable for varied grooving,external/internal turning and threading,for semi-finishing/roughing steel metal.
  • All metal lathe cutting tools and inserts packed in a premuim aluminium carrying case,easy to carry.
Check Stock

OSCARBIDE 3/4”Shank 9 Pieces/Set Indexable Carbide Lathe Turning Tool Holder and Boring Bar,CNC Heavy-Duty Nickel Plated indexable Insert Holders for Turning Grooving Threading Cut Off

  • 3/4” Metal lathe cutting tools includes 1pcs External Parting&Grooving Tool Holder QA12R-30, 6pcs External Turning tool holder SCBCR,SSSCR,SCLCL,SCLCR,SWGCR,SDNCN ,1pcs SER External Threading Tool Holder,1 pcs S12S-SCLCR Boring Bar.
  • Turning Holders are made of high quality steel with Nickel Cotated, which are more durable moistureproof, dust-proof than general lathe tool holder.
  • Cutters bits are made of carbide with Tin-coated,with positive rake cutting angle and built-in chip breaker for general purpose cutting action.
  • Metal Lathe tools suitable for varied grooving,external/internal turning and threading,for semi-finishing/roughing steel metal.
  • All metal lathe cutting tools and inserts packed in a premuim aluminium carrying case,easy to carry.
Check Stock

Turning Insert Holder SVJCL 1212H 11, with 1PCS Insert VBMT 221 (VBMT110304), Square Shank, Steel, External, Screw Clamp, Left Hand, 12mm Width x 12mm Height Shank, 100mm Length.

  • 3/8"Metal lathe tools include 1pcs External Parting&Grooving Tool Holder QA08R-20,6pcs External Turning tool holder SCBCR,SSSCR,SCLCL,SCLCR,SWGCR,SDNCN ,1pcs SER External Threading Tool Holder,1 pcs S06M-SCLCR Boring Bar.
  • Turning Holders are made of high quality steel with Nickel Cotated, which are more durable moistureproof, dust-proof than general lathe tool holder.
  • Cutters bits are made of carbide with Tin-coated,with positive rake cutting angle and built-in chip breaker for general purpose cutting action.
  • Metal Lathe tools suitable for varied grooving,external/internal turning and threading,for semi-finishing/roughing steel metal.
  • Replacement inserts of this kit , please search the Asin of this item: B0875TPL4Y on Amazon to buy it. All holders and inserts packed in a premuim aluminium carrying case,easy to carry.
Check Stock

OSCARBIDE 9 Pieces/Set 1/2"Shank Nickel Plated Indexable Carbide Lathe Turning Tool Holder and Boring Bar,CNC Heavy-Duty Metal Lathe Tools for Turning Grooving Threading Cut Off Tools

  • 1/2” Metal lathe tools include 1pcs External Parting&Grooving Tool Holder QA08R-20 , 6pcs External Turning tool holder SCBCR,SSSCR,SCLCL,SCLCR,SWGCR,SDNCN ,1pcs SER External Threading Tool Holder,1 pcs S08M-DCLCR Boring Bar.
  • Turning Holders are made of high quality steel with Nickel Cotated, which are more durable moistureproof, dust-proof than general holders.
  • Carbide Cutters bits are made of carbide with Tin-coated,with positive rake cutting angle and built-in chip breaker for general purpose cutting action.
  • Lathe turning tool holders Suitable for varied grooving,external/internal turning and threading,for semi-finishing/roughing steel metal.
  • Replacement inserts of this kit , please search the Asin of this item:B0BHWBR7V8 on Amazon to buy it. All holders and inserts packed in a premuim aluminium carrying case,easy to carry.
Check Stock

1/2\ Lathe Threading Tool External/Internal Threading Holder SER 1212H11+ SNL 0008K11 Threading Holder with 11ER AG60 11IR AG60 Threading Inserts (SER1212H11+SNL0008K11+11ER AG60)

  • ♥Package includes ：1PC SNR0008K11 + 1PC SNR0010K11 + 1PC SNR0012M11 turning tools + 3PCS 11IR A60 turning inserts + 3PCS T8 wrench.
  • ♥3pcs Thredaing boring bars : The material of the boring bar is 40Cr steel, Widely Use, Tightly impacted bolt, simple structure, often used for small hole machining..
  • ♥3pcs 11IR A60 boring inserts : 60°general thread insert, processing pitch range: 0.5mm - 1.5mm. Inserts are made of carbide and the coating material is TiN ,it Can be used for processing steel ,the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability ..
  • ♥Package: The carbide inserts and turning tools holder are packed in plastic containers, safe and easy to store ..
  • ♥ If you need more 11IR A60, please search ASIN：B09496NZ3R.
Check Stock

Ridgid 47760 Universal Die Head 1/4-3/8 NPT HS

  • accuracy class: 6g. Made of alloy tool steel, hardness, high torque, good toughness and wear-resistance..
  • Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
  • Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ....
Check Stock

Boring Head 2\(7/8-20) With MT2 Shank 3/8-16 Thread and 9Pcs 1/2\ Shank Boring Bar Sets

  • 2 inch boring head， With MT2 shank(end thread 3/8-16).
Check Stock