Best Boring Bar Turning Tool

iCarbide 3/4 Shank Indexable Boring Bar 6pcs Set with 6pcs Carbide Inserts

  • Sclcr Boring Bar 1-1/2" Shank Diameter, Overall Length 14”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • OSCARBIDE boring bars Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT120408( CCMT432) Carbide Inserts 80 degree，negative 5 degree end & side cutting angle.
  • For semi-finishing and finishing operations.
Check Stock

OSCARBIDE 3/4'' x 10'' Indexable Boring Bar with 10 Pieces Carbide Inserts CCMT09T304(CCMT32.5),Right-Hand Sclcr Boring Bar

  • Sclcr Boring Bar 3/4" Shank Diameter, Overall Length 10”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree,negative 5 degree end & side cutting angle.
  • Packing:1 pc 3/4'' x 10'' RH SCLCR Indexable Boring Bar with 10pcs carbide inserts CCMT09T304(CCMT32.5).
Check Stock

OSCARBIDE 1/2 x 7 Indexable Boring Bar with 10 Pieces Carbide Insert CCMT09T304 CCMT32.5 Right-Hand Sclcr Boring Bar

  • Sclcr Boring Bar 1/2" Shank Diameter,Overall Length 7”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient,good wear resistance.
  • Used for Turning internal hole,reaming,copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree,negative 5 degree end & side cutting angle.
  • Packing:1 pc 1/2'' x 7'' RH SCLCR Indexable Boring Bar with 10pcs carbide inserts CCMT09T304(CCMT32.5).
Check Stock

ASZLBYM 2PCS 5/8\ MGIVR2016-2 MGIVL2016-2 Lathe Boring Bar Grooving Cut-Off Tool Holder with 2PCS MGMN200-G NC3020 Insert

  • Sclcr Boring Bar 5/8" Shank Diameter, Overall Length 8”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree，negative 5 degree end & side cutting angle.
  • Packing:1 pc 5/8'' x 8'' RH SCLCR Indexable Boring Bar with 10pcs carbide inserts CCMT09T304(CCMT32.5).
Check Stock

uxcell Indexable CNC Lathe Turning Tool Holder 93°DVJNR2020K16 3/4 Shank Carbon Steel Carbide Turning Tool Holder for Turning Grooving Threading

  • [Specification] - Cutting Angle: 93°, Cutting Direction: Right, Material: High Steel, Model: DVJNR2020K16, Holder Width: 20mm / 0.79inch, Holder Thickness: 20mm / 0.79inch, Total Length: 125mm / 4.92inch, Available Inserts: VNMG16 Inserts.
  • [Durable to Use] - The material of the turning tool holder is Carbon Steel, it has the characteristics of durability, sturdiness and stability, and good anti-rust performance..
  • [Finish] - Black oxide smooth finish on each turning tool holder marked with tool holder style and shank size for easy identification of the tool holder..
  • [Wide Range of Applications] - The boring bar is suitable for cutting step surface processing and other processing..
  • [Package Content] - You will receive 1pc indexable lathe turning tool holder(carbide insert not included) and 1pc wrench..
Check Stock

5 PC 1/2'' Indexable Carbide Insert Lathe Turning Tool Bit + 10 Pc Tips COMBO

  • -5 pcs of TCMT3252 insert with chipbreaker, C6 Carbide grade for tool steel.
  • -Style included: AR - right hand, AL - left hand, BL - left hand 15 angle, BR - right hand 15 angle, style E - threading tool 30 angle.
  • -2 each Style A 0° for Turning, Facing, Boring, and Chamfering, 1 pc of left hand and 1 pc of right hand.
  • -2 each Style B 15° for Turning, Facing, Boring or any lead angle can be used , 1 pc of left hand and 1 pc of right hand.
  • -1 each Style E 30° for Turning, Facing, Boring, Chamfering, Threading and "V" Grooving.
Check Stock

RIDGID 72327 418 Oiler Gun, All-Weather Pipe Threading Oiler Gun with Simple 2-Finger Trigger Design, heavy-duty 1-Gallon Capacity Reservoir and Handy 54-Foot Hose,Silver,Small

  • 1. Material: Steel(Turning Holder)+Carbide(Carbide inserts).
  • Color: Black(Boring Bar)+Golden (Threading Insert).
  • 2. Direction: Right Shank Dia: 13mm=0.51"=1/2".
  • 3. Package: 1pc SNR0013M16+1pc SER1616H16 +5pcs 16ER AG60+5pcs 16IR AG60+2pcs wrenchs.
  • 4. Black oxided smooth finish on each turning tool holder style and shank size. Blades exquisite workmanship, high strength, high toughness, stable and durable..
  • 5. If you need more 16ER AG60 ,please search 【ASIN：B07RB5BKG7】,16IR AG60【ASIN：B07S1WSNJ6】.
Check Stock

1/2\ 5/8\ Boring Bar SNR0013M16+SER1616H16 Lathe Internal Threading Inserts Turning Tool Holder with 5pcs 16ER AG60+5pcs 16IR AG60 Carbide Turning Inserts

  • 1. Material: Steel(Turning Holder)+Carbide(Carbide inserts).
  • Color: Black(Boring Bar)+Golden (Threading Insert).
  • 2. Direction: Right Shank Dia: 13mm=0.51"=1/2".
  • 3. Package: 1pc SNR0013M16+1pc SER1616H16 +5pcs 16ER AG60+5pcs 16IR AG60+2pcs wrenchs.
  • 4. Black oxided smooth finish on each turning tool holder style and shank size. Blades exquisite workmanship, high strength, high toughness, stable and durable..
  • 5. If you need more 16ER AG60 ,please search 【ASIN：B07RB5BKG7】,16IR AG60【ASIN：B07S1WSNJ6】.
Check Stock

ASZLBYM 3/4\ Right Cutting Lathe Indexable Turning Tool Holder MWLNR2020K08 with WNMG432 Carbide Turning Insert

  • Top quality indexable lathe bits with replaceable tips. Inserts can be rotated to a new cutting edge without changing the position of the tool holder!.
  • Set includes 5ps precision 1/4" shank tool bits with C6 carbide inserts, 5ps spare insert screws,2ps wrenches , 1ps wood case and 1ps blade..
  • 2 Pcs. style "A" 0° for turning, facing, boring, and chamfering (AR & AL).
  • 2 Pcs. style "B" 15° for turning, facing, boring, and for lead angles (BR & BL).
  • 1 Pc style "E" 30° for turning, facing, boring, chamfering, threading, and V-grooving.
Check Stock