Best Bmpcc 6k Battery Grip

Tiltaing Camera Cage for BMPCC 6K Pro Full Kit TA-T11-FCC-B Blackmagic Pocket Cinema Camera Rig (Full Kit Black)

[PROTECTIVE ARMOR] for BMPCC 6K Pro Minimizes Wear and Tear Over Time.
[MOUNT ACCESSORIES] via NATO Rail, Arri Compatible Rosettes, Cold Shoe Receivers, 1/4"-20 Threads with Locating Pins.
[HALF OR FULL] Detachable Design Allows More Flexibility in Different Shooting Situations.
[ARCA COMPATIBLE] Bottom Plate Allows for Quick Mounting to the DJI RS 2.
[BATTERY GRIP] Compatible via an Adjustable Bottom Plate.

Check Stock

SMALLRIG Lightweight Top Plate for BMPCC 4K & 6K - APT2510

【FOR BMPCC 4K & 6K】SMALLRIG APT2510 is designed to mountarious accessories such as a monitor or top handle on your Blackmagic Design Pocket Cinema....
【ANTI-TWIST】The multifunctional top plate for BMPCC 4K & 6K firmly mounts to the camera using a 1/4”-20 screw and features an anti-twist....
【MOUNTING POINTS】The plate features a variety of mounting options including 1/4”-20 and 3/8”-16 holes, two locating holes for ARRI standard,....
【SINGLE 15MM ROD CLAMP】The included 15mm rod clamp is detachable and can mount on several selected places, so you can use a seperately available....
【BUILT IN NATO RAIL & COLD SHOE】The plate also includes a built-in NATO rail, two integrated shoe mounts for additional mounting options. An Allen....

Check Stock

IndiPRO V-Mount Battery Plate with 15mm Rod Mount & Coiled Cable for BMPCC 4K/6K/6K Pro (18-40")

Use the V-Mount Battery Plate with 15mm Rod Mount for BMPCC 4K/6K from IndiPRO Tools to power your Blackmagic Pocket Cinema Camera 4K or 6K with a longer-lasting V-mount battery.
It connects to the camera using a dedicated 2-pin connector at the end of a coiled cable. The cable measures 18" when fully contracted and extends to up to 40".
This coiled factor of the cable provides the flexibility to run the cable from one end of your rig to the other, while also letting you keep a neat connection if your power source is close to the camera.

Check Stock

Power Junkie by Blind Spot - Multi use NPF Battery Plate for filmmakers Using NP-F Batteries - Mirrorless or BMPCC Power - It s Also a npf Charger - Battery Plate with Industry Mount.

Power most DSLR/Mirrorless camera rigs plus BMPCC 4K / BMPCC 6K: Filmmaking is tough on your batteries, with the Power Junkie use Sony NP-F batteries....
Use three ports simultaneously: A 2.5mm DC port and 2x USB-A. Power your camera, a film light and another accessory all at the same time up to 28W.....
Charge and Sony NP-F battery: Input power for charging via USB C or USB Micro. USB power is available everywhere from your phone charger to your car....
Industry mounting: Using a 1/4" it can be mounted to any cage, a cold shoe also gives you the flexibility of mounting and un-mounting quickly. A zip....
LED power indicator: Have full visibility of your battery. Monitor how much power is left, when charging it also monitors how full the battery is..

Check Stock

SZRMCC BMPCC4K Blackmagic Pocket Cinema Camera 4K USB to SF610 Weipu 2 Pin Female QC3.0/PD3.0 Mobile Power Battery Power Cable

Fit to power your BMPCC4K 6K BMD Blackmagic Cinema Camera 4K 6K using an external QC3.0/PD3.0 Mobile Power Battery with a USB DC 12V Outport..
Use this cable with select QC3.0/PD3.0 Mobile Power Battery for a longer-lasting power solution..
Plug B: Weipu SF610 2 Pin Female Connector..
Cable Length: 39inches/100cm(We can customize with other length, please contact us if you need).
Each cable we produce has been rigorously tested and is compatible with machines from a variety of major brand suppliers,We are committed to all the products are qualified and high-quality..

Check Stock

SmallRig Battery Grip Compatible Cage Only for BMPCC 6K Pro, Comes with Built-in NATO Rail & Locating Holes for ARRI and Cold Shoe Mount - 3382

【ONLY FOR BMPCC 6K PRO】SmallRig Full Cage 3382 is specially designed for Blackmagic Design Pocket Cinema Camera 6K Pro and its related battery grip. It would not block any buttons on the camera. It can also be disassembled and used as a half cage. Furthermore, it adopts ergonomically design on right side, hence a comfortable grip experience..
【ANTI-TWIST FUNCTION】SmallRig 3382 firmly locks via a 1/4"-20 screw on the top and two on the bottom to prevent wiggles, and comes with rubber pads at the bottom to prevent scratching. Lightweight design with only 355g, the cage is made of premium aluminum alloy, with matte surface and strong oxygen resistance..
【MULTIPLE MOUNTING POINTS】It is equipped with multiple mounting points, such as 1/4" & 3/8" threaded holes, cold shoes, NATO Rail and locating holes for ARRI, allowing you to connect more accessories such as SmallRig Top Handle 2165, and SmallRig SSD Holder 3300 for Samsung T5 SSD, etc..
【FEATURED RECOMMENDATIONS】It features a NATO rail and multiple 1/4" threaded holes on the left side, that could attach NATO Side Handle 2187 for handheld shooting and dedicated HDMI & USB-C cable clamp 3271 for stable signal. The holes at top-right corner and bottom-left corner allow access to follow focus r....

Check Stock

SMALLRIG Camera Cage Accessory Kit for BMPCC 6K Pro, with Top Handle Wooden Side Handle HDMI Cable Clamp SSD Clamp Sunhood NATO Rail Screen Protector for Blackmagic Pocket Cinema Camera 6K Pro- 3299

【For BMPCC 6K Pro】SmallRig Camera Accessory Kit 3299 is specially designed for BMPCC 6K Pro. The package include Camera Cage 3270/Top Handle 2362/Side Handle 2187/Sunhood 3273/SSD Cable Clamp 3300/HDMI Cable Clamp 3271/NATO Rail 2172/Screen Protector 3274..
【Mutifuctional Cage】Special designed aluminum-alloy full cage 3270 can be split as a half cage.The built-in Mount for T5 SSD takes up very little space and improves compactness and suits SSD & USB-C cable clamp to ensure stability and smooth data transmission while shooting. Featuring with multiple 1/4"-20 threaded holes that support additional camera accessories. The threaded holes on the bottom support to attach Quick Release Plates 1280 & 2146 and stabilizer of DJI RS2..
【NATO Top Handle & Side Handle】The NATO top handle 2362 can rotate 360 degrees and secures to any cage with nato rail on the top or side, and features multiple 1/4"-20 and 3/8"-16 threaded holes for accessory attachment. The NATO side handle 2187 fits the curve of hands for a comfortable grip and is designed for quick assemble and disassembly..
【Screen Protect】The sunhood 3327 is easily removable and does not interfere with the flip of the screen, hence a better screen display under strong outdoor light. Besides, t....

Check Stock

Blackmagic Design Pocket Cinema Camera Battery Pro Grip

Capacity: The Blackmagic Pocket Camera Battery Pro Grip adds two extra NP-F570 batteries to the 6K Pro for over 3 hours of shooting on a single charge. That�s a massive battery life, in a compact design that integrates seamlessly with the camera.
Design: Featuring a unique carbon fiber design, non-slip hand grips, and a slide out tray, the battery grip makes long shoots easier because it gives you more to hold onto.
Status: You can view the status of the grip�s batteries on the touchscreen display.
Charging: You can charge the batteries via the camera�s 12V DC power connection in between takes.
Replacement: The Blackmagic Pocket Battery Grip lets you replace the 4K and 6K model�s standard LP-E6 battery with two L-series batteries.

Check Stock

MAGICRIG BMPCC 4K /6K Cage with NATO Handle + T5 SSD Card Mount Clamp for Blackmagic Pocket Cinema Camera BMPCC 4K /6K

...for Blackmagic Design Pocket Cinema Camera 4K & 6K. This cage of anti-twisting and excellent heat dissipation for better shooting without making any damage to your valuable camera.【Not for BMPCC 6K Pro!】.
Perfectly compatible - Form-fitting design with unobstructed battery & SD card access. Securely locked by 1/4'' screws on the top and bottom, with additional locating pins and rubber pads on the base plate to prevent twisting..
Multiple mounting interfaces. The cage is equipped with multiple 1/4'' and 3/8'' screw holes that can be used to install monitors, microphones, flash and other accessories..
T5 SSD card holder. Two M5 knob screws are used to lock the T5 SSD and its USB-C cable. There are a variety of mounting options to give you more options. The mount can be mounted on the camera mount with two M4 screws or Two 1/4" screws..
It consists of a cage with a NATO handle and a T5 card holder. This handle is equipped with the hole pattern for ARRI accessory mount pins, you can attach compatible extension blocks, also provides 1/4&quo....

Check Stock