Best Blow off Valve Vacuum Hose

PERRIN Blow-Off Valve Kit Red Compatible with Subaru WRX 2008-2014

  • This plug is perfectly suitable for F150 2013-2021 and for Expedition Ecoboost Engines 2015‑2021. Perfectly matched, it is a perfect substitute for old or damaged discharge valve plugs..
  • Using this discharge valve plug allows you to discharge hot pressurization to the atmosphere, lower the inlet temperature and improve overall performance throughout the operating range. You can have a clean exhaust valve sound and better performance without recirculating hot air and introducing unwanted heat into the engine..
  • The drain valve plug is easy to install and easy to use. There is no need to install any tools, and the installation can be completed quickly within 15 minutes. First find the blow valve pipe joint, rotate the coupler to remove the blow pipe, then disconnect the BOV hose from the intake pipe, and install the VTA MOD into the pipe before the exhaust valve..
  • This VTA mod allows you to vent the hot boost to the atmosphere instead of recycling it and creating much hotter inlet temperatures. This will lower inlet temperatures and improve overall performance throughout the operating range..
  • The best part is you can have clean blow off valve sound and know you have the best performance without recycling HOT air and introducing unwanted heat into the engi....
Check Stock

Sunxenze Air Duster Blow Gun with 5 Meter Long Coil PU Air Hose,Air Tank Blow Gun Kit,Blue

  • This air duster blow gun is a professional quality tool, easily gets into tight spaces..
  • Heavy Duty Truck Air Duster Blow Gun, For use on trucks with air tank systems, the air blow Gun kit is used to clean from the Cab to the Sleeper or clean your element air filter or anything else..
  • Polyurethane (PU) Air Hose Outer Diameter:6mm.
  • T-Shaped Quick Connector With Bronze Ball Automatic Shut-Off Valve..
  • The air blow gun kit is convenient for drying off fluids, clearing debris, and much more..
Check Stock

Sunxenze Air Duster Blow Gun with 5 Meter Long Coil PU Air Hose,Air Tank Blow Gun Kit,Black

  • This air duster blow gun is a professional quality tool, easily gets into tight spaces..
  • Heavy Duty Truck Air Duster Blow Gun, For use on trucks with air tank systems, the air blow Gun kit is used to clean from the Cab to the Sleeper or clean your element air filter or anything else..
  • Polyurethane (PU) Air Hose Outer Diameter:8mm.
  • T-Shaped Quick Connector With Bronze Ball Automatic Shut-Off Valve..
  • The air blow gun kit is convenient for drying off fluids, clearing debris, and much more..
Check Stock

WORKSHOP Wet Dry Vac WS1600VA High Capacity Wet Dry Vacuum Cleaner, 16-Gallon Shop Vacuum Cleaner, 6.5 Peak HP Wet And Dry Vacuum

  • 2-1/2-inch x 7-foot dual-flex locking Hose offers 180 degree flexibility at both hose ends. Locking tab keeps hose connected to the wet dry vacuum cleaner during use.
  • Qwik Lock filter fastening system allows quick and easy wet dry vacuum filter changes and contains an auto shut-off float mechanism that helps prevent overflow during wet pickups..
  • Accessory storage on the feet and top keeps vacuum attachments secure and within reach.
  • This shop vacuum cleaner has a tough copolymer drum to resist dents and cracks, It will not rust and has a large drain for easy liquid disposal. Not compatible with dust collection bags..
  • Integrated blowing port provides added versatility to this powerful wet dry vacuum cleaner, allowing a user to blow unwanted debris out of garages, jobsites, and driveways..
  • Largest capacity and most powerful vacuum in the line.
  • picks-up about 1 gallon of water per second.
  • Drain port to easily empty wet messes, and integrated blower for added versatility.
  • 7-foot long with 2-1/2-inch diameter hose and 20-foot power cord provide plenty of reach.
  • Includes: vacuum, hose, Qwik Lock cartridge filter, utility nozzle, wet nozzle, car nozzle, two extension wands.
Check Stock

Ultra Clean Central Vacuum Carpet Attachment Kit with Adjustable Height Electric Powerhead – Hose and Deluxe Tools (White, 35ft)

  • ✅ Fits any standard 1.5 inch inside diameter wall valve regardless of the make and model of your central vacuum. A great replacement kit and compatible with All brands like Beam, Electrolux, Nutone, Allegro, Ovo, Prolux, Nadair, Honeywell, Husky, Eureka, Hoover, Hayden, Kenmore and many more.
  • ✅ Ultra Clean Central Vacuum Electric Hose, Height Adjsutable Powerhead and Attachment Set. BONUS TOOLS!: Included is a Hose Cover to keep you hose clean and save your trims and other surfaces from scuff marks AND a microfiber mop head with a removable and washable Velcro ideal for hardwood flooring..
  • ✅ 35 ft Deluxe light-weight Crush-Proof Dual Voltage 24 v / 110 v Electric Hose with 3-way on/off switch and 360 degree full swivel handle you can turn both the central vacuum and the powerhead on/off from the handle. This is the Best Central Vacuum Hose in the market.
  • ✅ Amazing powerhead with 6-level of height adjustment for all types of carpets and rugs, quick-release and 360 degree swivel neck as well as a reset button and dirt sensor. TOP QUALITY !.
  • ✅ COMPLETE KIT, All you would need for cleaning and more: Electric Power Nozzle, Hardwood/Tile/Ceramic Floor Brush with Natural Horsehair Bristles - Upholstery Nozzle - Crevice Tool - Dust Brush with Natu....
Check Stock

Cen-Tec Systems 93070 Central Vacuum Kit with Switch Control Hose, 35 Ft, Silver

  • The 93048 is compatible with air turbine nozzles and all major brands of central vacuums including Beam, Electrolux, Eureka, Vacuflo, Vacumaid, MD, Cyclovac, Canavac, Hayden, Star Power, and Imperium. The hose is compatible with air turbine nozzles and 1.25 inches accessories of all types.
  • The 93070 permits remote activation of the central vacuum through the low volt contacts exposed in the inlet valve opening. It does not connect to 120 V power permitting the use of an electric power.
  • The lightweight highly flexible hose is made in the usa and is designed to power on and off the central vacuum power unit through industry standard pin jack inlet valves. The hose will work with standard accessories and any of the industry air turbine nozzles. It is not for use with an electric power nozzle.
  • The package comes with two floor nozzles. One is a multi-surface nozzle which works equally well on carpet and hard floor surfaces, while the other is a usa-made hard floor brush.
  • To confirm this package will work with your inlet valves you can confirm there are two small contact points located in your inlet valve on either the top half or bottom half of the inlet valve opening.
Check Stock

Hromee Fuel Pump and Vacuum Tester Gauge Carburetor Pressure Diagnostics Leakage Tool Kit

  • FUEL PUMP - This pressure gauge set can be used to test fuel pump pressure, emission control devices, leaky, stuck open or burnt valves. Clogged muffler, turbo or exhaust system. Helps to locate leaks in the gas line, valve timing, worn out rings and seals, heating and air conditioning components..
  • CAR VACUUM TESTER - Also can be used for testing engine vacuum lines, brake assist system, carburetor and intake manifold for leaks, vacuum or pressure loss. Set includes a variety of adapters suitable for most vehicles.
  • Intended for carburetor engines with a mechanical fuel pump operating pressures below 10 PSI (0.7 Bar)..
  • PRESSURE GAUGE - The gauge has 4 inches diameter large scale, color-coded measurement, rubber surrounded protective and a hook on the top. so it’s easy to read and use. Range of vacuum dials is 0-28in/Hg Vac, 0-70cm/Hg.
  • Range of pressures dials is 0-10 psi/g, 0-0.7 kg/cm2..
  • HOSE AND ACCESSORIES - The kit comes with a 2ft/61cm rubber hose (13/64-inch ID and 23/64-inch OD). The max working pressure is 40PSI. Other accessories include (1)conical adapter, (1)plastic connector, (1) 1/4”x18 male to 1/8”-27 female adapter, (1)1/8”-27 male to 7/32”barbed fitting adapter, (1)1/8”-27 female to 3/8”male adapter, (1)T-type 7/32”barded ....
Check Stock

Idol Pleasures

  • 【POWERFUL PROPANE WEED BURNER TORCH】Compared to other propane weed torch, our weed burner torch Constructed of stainless steel and copper, This propane burner can stand burning of high temperature flame. The dual adjustment system of flow valve and turbo-blast trigger allows you to control the flame with one hand for easy operation, 24-inch length design and Ergonomic anti-slip handle Can be avoiding crouching and Hand fatigue. 3-different torch nozzles for maximum compatibility..
  • 【WIDELY USE – FLAME THROWER】Portable propane torch weed burner Perfect for burning Yards, gardens, concrete cracks, weeds in driveways.
  • heat metal castings, asphalt and roofing materials.
  • melt ice snow off steps, sidewalks, driveways.
  • remove paint, grease, plastic from metal, concrete and other non-flammable objects.
  • 【EASY TO USE – PROPANE WEED TORCH】①: Connect the weed torch up to any refillable propane tank.
  • ②: slowly loosen the gas tank valve and check for leaks.
  • ③: Slightly loosen the propane blow torch flow valve and ignite directly at the nozzle.
  • ④: adjust the blow torch flow valve to reach the desired temperature. ⑤ notice: After use the propane weed torch, close the gas tank valv....
Check Stock

Hromee 16 Pieces Air Compressor Accessory Kit with 1/4 Inch Recoil Poly Air Hose, Blow Gun and Fittings Inflation Kit with Needles, Ball Chuck and Tire Pressure Gauge

  • ...protect the delicate surfaces from damage..
  • INFLATION KIT - The tire inflation needles are to inflate pool toys, sports balls, and air mattresses. The ball foot air chuck in this kit is ideal for tire inflation of various tires, including car, truck, SUV and bicycle tires. The ball foot chuck has a built-in shut-off valve and therefore only use when air supply lines come directly from the compressor with no other valve in the line..
  • EASY TO USE - NO batteries requiredthe, easy to use and is reliable in all weather conditions. Easy to read large scale dial. The tire pressure gauge for getting precise and accurate pressure reading every time you use it. Its range is 8-106 PSI and it has a deflation button. Built in relief valve allows to press the bleed button whilst the gauge is still on the tire valve, releasing air until you reach the exact target required..
  • ALUMINUM CONNECTORS - All of 1/4” NPT fittings such as female and male plugs and couplings included in this inflation kit. All of air fittings are made of high corrosion resistant anodized aluminum, making them stronger and 50% lighter than standard fittings. It is designed for high corrosion resistance, longer life and smoother operation..
Check Stock