Best Blacksmith Hammer

Blacksmith Anvil Bladesmith, Welder, Machinist Premium T-Shirt

  • We created this great iconic design for everyone who has steel in their blood, sweat on their brow, and a hammer in their hand. Here’s to the art of blacksmithing!.
  • This Blacksmith Anvil design would make a great gift for any blacksmith, bladesmith, welder, machinist or craftsman. Great to wear in the workshop or just around town..
  • This premium t-shirt is made of lightweight fine jersey fabric.
  • Fit: Men’s fit runs small, size up for a looser fit. Women’s fit is true to size, order usual size..
Check Stock

KSEIBI 271150 Engineers Machinist Blacksmith Strike Club Hammer (Wood Handle, 4.40 lb / 2000 grams)

  • The Blacksmith hammer head is made of high-carbon steel with heat treatment, high hardness, good toughness, and durability, which makes it perfect for any project..
  • This cross peen hammer handle is made of high-quality wood handle making this metal working hammer an ideal tool for all metal works..
  • This blacksmithing hammer is an essential tool for forging and can help you finish and get the job done in any metal fabrication tasks, home improvement, or construction sites..
  • A wide variety of projects can be finished with this engineer hammer such as striking, shaping, and bending unhardened metal or shaping block, brick, and stone..
  • The 4.40 lb metal forge hammer head has two different striking surfaces, an anti-rust polished black surface, with a well-balanced 14-inch handle Long.
Check Stock

9" Long Flat Face and Cross-Peen Goldsmith's Hammer w/Wooden Handle for Riveting Chisel Metal Forming Jewelry Making Tool

  • Muti-Purpose Application --- Blacksmith wolf jaw tong & hammer are universal for beginner or seasoned blacksmiths, bladesmiths and farriers to work around heavy metals, high heats, and intense construction. They are easy to use and can be relatively light inweight while being tough enough to withstand forging conditions..
  • Ultra-Strong Craftsmanship --- Made of heavy duty steel with heat treatment, coated with non-slip wax on the surface, excellent toughness and hardness, rust resistance and corrosion resistance withstand high heat. Our Wolf Jaw tong & hammer give great support in control, stability, strength, long-term resilience, safety and quality..
  • Wolf Jaw Tong --- Designed with a wavytooth-like shape that allows it to adapt to different stock shapes and sizes including flat, square and round stock, and provide a secure grip. Extended anti-slip handle provides users with a comfortable grip, keep better distance to ensure your safety. 15" (380mm) long, weighs approximately 2 lbs..
  • Blacksmith Hammer --- Designed with a tepered head, smooth bottom & extended handle. The tepered head works onconcentraring s....
Check Stock

KSEIBI 271450 Machinist Engineers Hammer, Forged Steel Cross Peen Sheet Metal Hammer, Blacksmith Forging Tools (Soft Grip Handle, 2.20 lb / 1000 grams)

  • The Blacksmith hammer head is made of high-carbon steel with heat treatment, high hardness, good toughness, and durability, which makes it perfect for any project..
  • This cross peen hammer handle is made of high-strength fiberglass covered with non-slip rubber making this metal working hammer an ideal tool for all metal works..
  • This blacksmithing hammer is an essential tool for forging and can help you finish and get the job done in any metal fabrication tasks, home improvement, or construction sites..
  • A wide variety of projects can be finished with this engineer hammer such as striking, shaping, and bending unhardened metal or shaping block, brick, and stone..
  • The 2.20 lb metal forge hammer head has two different striking surfaces, an anti-rust polished black surface, with a well-balanced 14-inch handle.
Check Stock

C.S. Osborne Replacement Tack Hammer Handle, Wood, T-33-H

  • For Fastening or Tightening Loose Wood Hammer Handles.
  • Made Of Steel In The USA, To Install: Drive In Wedge With A Hammer And File Smooth.
  • 15/32" Wedges Are Great For Carpenter, Blacksmith, Auto Body Hammers, Etc... (15/31" wide x 1-1/8" long x 5/32" thick).
  • 1" Wedges Are Great For Splitting Mauls, Axes and Sledge Hammers (1" wide x 1-1/8" long x 5/32" thick).
  • 1-1/4" Wedges Are Great For Splitting Mauls, Axes and Sledge Hammers (1-1/4" wide x 1-1/8" long x 5/32" thick).
Check Stock

BISupply Masonry Brick Hammer and Chisel Tool - 24 Ounce Rock Pick Hammer Geologist Rock Hammer for Digging and Building

  • [Built For the Pro]: From masonry work to carpentry to geological research, the BISupply Rock Mason Hammer and Chisel Tool provides durability and comfort when working.
  • 11.2-inch (28.5cm) tall brickhammer has a 7.3-inch (18.5cm) long head.
  • [Properly Balanced Design]: 24-ounce (1.5lb) blacksmith hammer is made of polished stainless steel to ensure high strength and excellent durability.
  • Mason chipping hammer is precisely balanced along shaft and through handle to provide strong, smooth striking power.
  • [Strong Striking Power]: Small masonry hammer has a 0.9 x 0.9 inch (2.3cm) square hammerhead.
  • Use to form and shape sheet metal and for striking hard surfaces like brick and concrete.
  • [Chip and Crack Rocks]: Second side of hammer brick breaker head features a sharp 1.3-inch (3.3cm) wide chisel to chip rocks or to crack bricks, concrete, and stones.
  • [Ergonomic Grip]: 7-inch (17.8cm) forging hammer handle is made of red plastic and rubberized features for durability and comfort.
  • Rubber grip helps reduce slippage and vibration while you work.
  • Finger grip notches in handle ensures optimal comfort and control.
Check Stock

Stonehaven Dwarf Blacksmith Miniature Figure (for 28mm Scale Table Top War Games) - Made in USA

  • This 25mm tall Dwarf Female Blacksmith has a great amount of detail for dungeon-crawling, RPGs and table top war games..
  • Miniature could be used as a Fighter, Warrior, Artificer, Craftsman, Civilian, or Shopkeeper. This dwarf is equipped with blacksmith hammer, tongs, anvil, apron braided hair..
  • Included with each mini is a slotted round plastic "creator" base. This base is not designed as a plug and play solution and requires some assembly and finishing (glue, putty, or other filler is recommended). Figure is made of 100% lead free pewter..
  • The pictures of the painted miniatures are for inspiration and are only examples..
  • Miniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. Choking hazard - Not suitable for children 14 and under..
Check Stock

Blacksmithing 4LB Bladesmith Handmade Forge Hammer Anvil Hammer Metal Forged Knife Making Blacksmith Forging Tools

  • 【Must Have Tool】The 4LB Forging Hammer is an ideal forge tool for any blacksmith / farrier / knife maker or tool collector. It has excellent results in metal forging, knife making and other forge work..
  • 【High Strength Hammer Head】Manufactured from high strength heat treated steel, the hammer head is super sturdy and can provide a very large knockout force when forging. After quenching treatment, its density and strength are greatly increased, and the hammer body is more solid and not deformed. Features with high temperature resistance, good wear resistance and long using life. Saving time and money..
  • 【Premium Wooden Handle】The wooden handle is made from premium wood, strong and durable. Using mechanical handle design, the middle to do recessed processing, not only non-slip oil-resistant, but also beautiful and comfortable..
  • 【Special Embedding Technology】With special embedding process, the hammer head and handle are tightly connected and not easy to fall off, which effectively improves the working efficiency..
  • 【100% Satisfaction Guarantee】The johntruck Team aims ....
Check Stock

Upgraded Blacksmith Wolf Jaw Tong & Professional Blacksmiths’ Hammer Set, Replace OEM#0000811-1000 Cross-Peen Swedish Pattern Hammer (16 in (400 mm))

  • 【Must Have Tool】The 4LB Forging Hammer is an ideal forge tool for any blacksmith / farrier / knife maker or tool collector. It has excellent results in metal forging, knife making and other forge work..
  • 【High Strength Hammer Head】Manufactured from high strength heat treated steel, the hammer head is super sturdy and can provide a very large knockout force when forging. After quenching treatment, its density and strength are greatly increased, and the hammer body is more solid and not deformed. Features with high temperature resistance, good wear resistance and long using life. Saving time and money..
  • 【Premium Wooden Handle】The wooden handle is made from premium wood, strong and durable. Using mechanical handle design, the middle to do recessed processing, not only non-slip oil-resistant, but also beautiful and comfortable..
  • 【Special Embedding Technology】With special embedding process, the hammer head and handle are tightly connected and not easy to fall off, which effectively improves the working efficiency..
  • 【100% Satisfaction Guarantee】The Johntruck Team aims to provide you the best products and services. Support 30 days returns and 12 months warranty. Please feel free to contact us if you have any question..
Check Stock