Best Billet Throttle

Aluminum Throttle Lock Cruise Control Universal Throttle Control Fit Cruiser Bikes Hand Assist for Honda/for Yamaha/for Harley Davidson/for Kawasaki

  • Universal Cruise Control - Cruise Assist for Your Motorcycle / Bike.
  • High Quality aluminum Billet CNC milled parts,provide Silicone Grip Band for smoother operation and protection of your throttle grip when Clamped.
  • Hold the throttle in place and then locks it,Anti Fatigue Throttle Assist eases the discomfort that long rides cause in your wrist.
  • Warning! Release Throttle Before Brake. Never remove your hand from the throttle. You can rest it on there without the tension, but removing your hand can cost precious seconds in an emergency situation. Take the time to sit on your bike at idol and practice engaging and disengaging the throttle lock. You push forward to release the lock. Never use it on curves or traffic..
  • Universal Fit all the bike with 7/8" handlle bars.
Check Stock

Mota Performance A70410 Billet Aluminum Alternator Pulley Single Groove 2.8\ Diameter

  • CNC Machine balanced Billet Aluminum construction.
  • Quality Corrosion Resistant Clear Anodized Machined finish.
  • Light weight design improves throttle response.
  • For best belt alignment use all the same brand pulleys.
Check Stock

BBR XR50 Handlebar Kit (Black) Compatible With 04-19 HONDA CRF50F

  • The BBR XR50 Handlebar Kit raises the handlebars for adult backyard racing.Stock controls will NOT fit on the standard 7/8" bars supplied with this kit, so this kit comes with all necessary parts including controls.Anodized, CNC-machined billet aluminum t.
  • Honda XR / CRF50 handlebars from 3/4" diameter to standard motorcycle / bicycle 7/8"..
  • This throttle, cable, and carburetor top are a special design to work with the super short slide of the O.E.M..
  • If you have a larger aftermarket carb, you will need a different throttle and cable (consider BBR's carb kit throttle and cable.
Check Stock

HTTMT TGMCCT06- Red Manual Cam Timing Chain Tensioner Compatible with Kawasaki KLF 110 Mojave FZ6 600

  • New high performance manual cam chain tensioner..
  • These manual tensioners are CNC machined from billet alloy to exact tolerances for perfect fit..
  • The automatic adjusters can back out when the throttle is closed suddenly at high rpm or revved really quickly..
Check Stock

Billet Specialties 199155 55-57 CHEVY GAS PEDAL

  • Brand New Black Anodized Modern Cable-Style Gas Pedal Assembly for 1955-1957 Chevy's > This Gas Pedal Assembly is produced by Billet Specialties (Part....
  • This black anodized modern cable style gas pedal assembly converts your old throttle linkage to a more modern cable style linkage for extra firewall....
  • This pedal assembly doesn't come with a cable.
  • Features: > Black Anodized Finish > Installs in factory firewall location with existing hardware > Taller throttle arm improves engine clearance and....
  • Applications: > 1955-1957 Chevy Bel Air > 1955-1957 Chevy 150 > 1955-1957 Chevy 210 > 1955-1957 Chevy 210 Delray > 1955-1957 Chevy Nomad > 1955-1957....
Check Stock

NTHREEAUTO 7/8’’ Handlebar Hand Grips Motorcycle Electric Throttle Grip Universal for Dirt Bike

  • ...handlebar, Inner diameter: left-7/8'' (22mm), right- 0.95'' (24mm). TIPS: If your right handlebar is 1'' (25mm), may be a bit difficult to install, and you need to polish the handlebar or grip to install it. Universal fit dirt pit bike/motocross/motorbike/off road/ATV grips..
  • 【Wrist Protection Design】Curve shape throttle holder with ergonomic design, fit the palm tightly, comfortable grip and easily operate the throttle during riding, No need to grip the throttle hard, just put your hand on the accelerator to move on, reduce hand fatigue and load..
  • 【Non-Slip Grip】The handlebar grips are made of CNC billet aluminum and rubber, the surface design with the crisp anti-skid slot provides better motorcycle handling, increases friction, comfortable grip and is easy to grasp ensuring your safety. Black anodizing, antioxidation, anti-rust, and corrosion-resistant, easy installation..
  • 【Easy installation】Fit dirt bikes with left-7/8'' (22mm) handlebar. NOTE: ONLY FIT electric throttle!!! NOT fit cable throttle!!! Just take off your stock grips and install the new handle grips. These grips are an ideal replacement for your old ones..
  • 【Buy with Confidence】You will get 1 pair of dirt bike handgrips. You are backed by 1-Year warranty from the order....
Check Stock

Suuonee Vacuum Block, 6 Port Vacuum Block Intake Manifold Kit Fuel Wastegate Turbo Boost 1/8NPT for Racing

  • Application: This product is ideal for connecting pressurization controllers, instrumentation, and any components that require a separate vacuum source.You can also use tape for fuel and oil requirements..
  • High Quality: New universal supercharging/ vacuum manifold.Using high-quality CNC machine tools to process T6061 billet aluminum. The billet vacuum manifold is a great additional tuner that requires additional vacuum sources..
  • Widely Used: Includes 6X 1/ 8NPT aluminum fitting port for boost controller, map sensor, fuel pressure regulator, boost meter, blow valve and any other fuel/ ignition management component requiring a vacuum source..
  • Simple to Use: The design of a supercharger car and a single throttle body requiring multiple vacuum sources. The billet vacuum manifold is a great additional tuner that requires additional vacuum sources..
  • Service Guarantee: We provide 24-month worry-free warranty, if you meet any problems when using our devices, please feel free to contact us and our staff will reply in 24hrs. You can buy with no worry..
Check Stock

PQYRACING 90MM Throttle Body Performance Intake Manifold Billet Aluminum HIGH Flow

  • ✿APPLICATION:90mm Bore Size.Universal Fit(It is for custom make project.Require modification to fit).For high flow application / turbo / natural aspirated..
  • ✿EASY TO INSTALL:Simple To Install on Stock Mounts, Sensor And Intakes.Able to Install the OEM ISC ( Idle Speed control ) or Cover up using the Provided spacer.There is no instruction..
  • ✿FEATURES:Power Increase In Minutes&Improve Throttle Responds.Will have 20 % minimum air flow increase over oem throttle.Approx airflow performance increase is at 20 percent..
  • ✿MARERIAL:Made from CNC Machined Billet Aluminum Alloy.
  • ✿WARRANTY:PQY offers 1 year warranty for the bushings.If you have any problem ,please contact us and we will respond you on 24 hours except weekends and holidays..
Check Stock

FAST LSXr 102mm LS1/2/6 Intake Manifold + 102mm Big Mouth Billet Throttle Body Kit

  • Perfect Match - The Lexar + Big Mouth Billet Throttle Body Kit is the best induction choice for GM 4. 8, 5. 3, 5. 7, 6. 0, 6. 2 LS engines with....
  • Untouched Performance for GM LS - The FAST Lexar is the standard in airflow, torque and horsepower production. Interchangeable intake runners allow....
  • The Quality Option - If you want to make power with your LS, avoid sheet metal intakes. Cheap aluminum manifolds trap heat and decrease efficiency.....
  • Pop the Hood - The FAST Lexar Intake and Big Mouth Throttle Body are an excellent upgrade not just for performance but also look great. The Lexar....
Check Stock