Best Bilge Pump Alarms

LINGVUM Bilge Pump for Kayak Canoe and Boat - 17 Inch Manual Portable Kayak Hand Water Pumps with Reversible Hose Orange

CONVENIENT BILGE MANUAL WATER PUMP --- Our manual bilge pump length is 16.5", the maximum unfolded length is 25.5", equipped with a 23.2"long hose. At the same time, Our bilge pump has two water inlets and a long hose that attaches to either end, removing water quickly and reducing your fatigue.
MAKES WATER REMOVAL EASIER --- The maximum displacement is 0.4L each time. The premium rubber seal creates a watertight seal that won't come loose or leak allowing for the maximum amount of suction and discharge that performs better than other hand bilge pumps. Suction spacers can allow water to flow into the manual water pump at the fastest speed.
SCENE TO BE USED --- Perfect for emergency water removal in boats, kayaks, canoes or dinghies. With our kayak bilge pump, rest easy knowing that you’ll have a quick and easy way of removing water in those difficult times. Spending time on the water is supposed to be fun! Perfect boating and kayaking accessory.
LIGHTWEIGHT & PORTABLE --- This kayak hand pump is light (Only 0.78 pounds), easy to carry and store. Foam padded handgrip is non-slip and provides buoyanc....

Excellent Design------Boat Marine Manual Hand Bilge Waste Water Transfer Pump is suitable for compact manual self-priming pump. Provides flow rates up to 12 gallons per minute (45 liters per minute)..
Durable and Reliable------Boat Marine Manual Hand Bilge Waste Water Transfer Pump has a robust and durable construction designed for marine applications. Ideal as a backup bilge pump in case your electronic bilge pump fails..
Specifications------ Manual Diaphragm Pump, Material: ABS, Diaphragm Manual Pump with Two Position Handle, Packing List: 1 x Manual Diaphragm Pump, 2 Adapters, 2 Seals..
Dimensions ------- Hose Inlet: Approx. OD. 1.36" (34.5 mm), Hose Outlet: Approx. OD. 1.36" (34.5mm), Max Suction Lift: Approx. 10ft (3m), Max Discharge Head: 13ft (4m). Flow: 720GPH (2724 LPH).
Easy to use------fixed handle with rubber handle, easy to use. Installation can be done without complicated steps..

【Specification】：Outlet Diameter : 29mm/ 0.95 Inch (1-1/8") POWER：1100 GPH Current(A）：3.2A Volt：12V.
【Automatic mode connection】：Connect black wire to negative,Connect brown wire to positive,the pump will be shut off automatically when the water is pumped out.This auto bilge pump 1100 gph would improve work efficiency and could be used for a long term..
【Advantages】:Equipped with built in electronic controlled sensor system for easy fully automatic operation.It is a small automatic boat bilge pump and it is rustproof and corrosion resistant..
【Warning】:This auto boat bilge pump is designed for use with fresh water and salt water only. And polarity is important. If it is not correct, the pump rotate backwards..
【Applications】:Ideal For Fishing Boats, Cruisers, Runabouts, Yachts, skiff, etc..

With this Three Way Bilge Pump Switch, you do not have to change a fuse. In case of having a short circuit, just press the button of the circuit breaker to restore the circuit.
PROVIDE remote control of automatic bilge pumps or bilge pumps with float switches.
3-WAY Stylish Rocker Switch has Auto, OFF and Manual positions. Power indicator light confirms system power.
MANUAL position has spring back feature to prevent bilge pump from continuously running.
COMPATIBLE with bilge pumps that draw up to 10A - 12/24VDC. FIVE OCEANS, 40 YEARS developing High-Quality Marine & Outdoor Products.

500 GPH, 12V, Fuse size: 3A, Outlet type: 3/4" & 1" barbs, Check valve: yes, Wire length: 29 1/2".
The easiest, most reliable automatic bilge pump ever designed.
The only automatic bilge pump that eliminates air-locks, Patented X-Air Impeller ejects trapped air in the pump and pipework.
Flexible Outlets: 90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation.
Single-Hand Pump Cartridge Release: Convenient when trying to access a pump located in a hard-to-reach area of the boat’s hull.

The pump securely clips into the mounting base for easy installation and for removal to clean and inspect the pump.
The self-contained automatic switch will detect water and automatically turn the pump on, when the water is gone shut the pump off.
The automatic bilge pump is completely submersible with a water pumping capacity of 800 GPH.
The ¾” O.D. outlet hose barb is designed to be used with standard ¾” I.D. bilge hose.
It’s ignition protected, uses a very low 5 amps operating current the wires are tinned marine grade.

DUAL ACTION: Our Kayak Hand Bilge Pump is dual action, meaning whether you're pushing or pulling, it's still pumping water out of your boat..
FLOATING: If you drop it overboard, this pump will float back up to the surface for you..
EJECTION TUBE: Our pump includes an ejection tube, so the water you pump doesn't end up back in your boat..
WHY: Quickly pump water out of the floor of your kayak, canoe, jon boat, inflatable dinghy, sailing dinghy, or other small watercraft. Use the ejection hose to clear the hull so the water isn't ending up back in your boat..
INCLUDED IN BOX: Kayak Bilge Pump w/ Foam Float, Water ejection tube.

Flow Capacity: Delivers up to 12 gallons per minute (45 litres per minute) flow capacity. Lightweight and sturdy, its easy lever action allows fast pumping.
Convenient to Use: Strong and durable construction, specifically designed for marine applications. Easy to use and maintain, the diaphragm is quickly accessed for removing debris.
Suitable for: Ideal as a backup bilge pump in case your electronic bilge pump fails. Manual bilge pump for small to medium-sized boats.
Rubber Handle Grip: Fixed handle with rubber handle grip, easy and convenient to use. Compact design for all your water transfer needs..
Diaphragm Self Priming: This product is a 100% brand new compact manual self-priming pump..

Mayfair Cartridge Bilge Pumps make cleaning and maintenance easy! Cartridge Bilge Pumps can be removed for cleaning or replacement without the use of a single tool..
Lift a tab on the top, give the cartridge a twist, and pull it out.
that's all there is to it! Includes all-in-one motor/impeller unit with no loose parts. Feature a thermoplastic body, lip seal shaft seal and a stainless steel motor shaft..
12V cartridge bilge pump with high impact housing. Easy installation and increased longevity. Corrosion, chemical and fuel resistant..
Permanent magnet motor along with permanent lubrication. T-Slot for easy float switch attachment.
1000 GPH, 3/4" Outer diameter discharge port, 5 Amp Fuse Size. Picture shows the 1000 GPH pump..