Best Best0toyota Tacoma Wheel Spacers

Readylift 66-5002 ReadyLift 2.0 Tall Rear Kit Silver

  • FITMENT: Lift kit for 2005 - 2019 Toyota Tacoma (2WD & 4WD). Does NOT fit 5-Lug or TRD Off-Road models. Simple installation in 2 to 4 hours for....
  • TACOMA SUSPENSION LIFT: This leveling kit will sustain your original ride quality with minimal effect on your truck’s center of gravity to maintain....
  • INCREASE GROUND CLEARANCE: Raise your Tacoma 3" in the front and 2" in the rear. Improve the look of your truck and increase ground clearance,....
  • ALL HARDWARE INCLUDED: Comes with 2 x 3" aircraft billet front strut spacers, 2 x 2" aircraft billet rear lift blocks, 4 extended zinc-plated U-bolts.....
  • TECHNICAL NOTES: Please note: Lift spacer thickness and lift is not a 1 to 1 ratio due to the suspension geometry. Wheel alignment is recommended....
Check Stock

BRTEC 1.25 Thick/6x5.5 Pattern/Inner Diameter 106mm Wheel Spacers fits 1996-2017 for Toyota 4-Runner/Tacoma/Tundra Hubcentric Wheel Spacers 2pcs

  • Compatible with: 1996-17 for Toyota 4-Runner.
  • 2001-2017 for Toyota Tacoma (6 Lug Only).
  • Specification&Parameter: Wheel bolt pattern: 6x5.5"/6x139.7mm, Vehicle bolt pattern: 6x5.5"/6x139.7mm, Inner Diameter: 106mm, Thickness: 1.25”,....
  • BRTEC’s 12-month warranty and is included free with all BRTEC brand wheel spacers. Your wheel spacers are guaranteed to remain in good operating....
  • BENEFITS: Increases tire clearance to allow installation of wider wheels and tires. Gives your vehicle a more aggressive stance. Improves handling....
  • HUBCENTRIC DESIGN: Eliminates frequency of vibration ensures exceptional wheel balance and. The 78.1mm bore ensures a tight fit on the your hub. And....
Check Stock

Supreme Suspensions - 2' Hub Centric Wheel Spacers for Toyota Tacoma PreRunner 2WD & Tacoma 4WD - BP: 6x5.5 / CB: 106mm / Studs: M12x1.5 [4pc Black Pack] - 4 Tire Valve Caps Included

  • COMPATIBLE WITH 1995 – 2020 Toyota Tacoma PreRunner (6-Lug 2WD) and 1995 – 2021 Toyota Tacoma (4WD). *Will NOT work on vehicles with DUALLY wheels or manual locking hubs. **Please verify fitment compatibility prior to ordering..
  • CONTENTS: (4x) T6 Billet Aluminum Hub Centric Wheel Spacers with Precision-Machined Splined Studs, (4x) T6 Billet Aluminum Tire Valve Stem Caps, Installation Hardware, and Supreme Suspensions Pro Pack.
  • SPECIFICATIONS: 2 Inches Thick, 6 x 5.5″ (6 x 139.7mm) Bolt Pattern, M12 x 1.5 Studs, 106mm Center Bore | NOTE: Spacers are Hub-Centric to ensure the best centered / balanced install. No Ring Needed..
  • BENEFITS: Positions your wheels 2 inches outward on each side to correct tire rubbing issues, increase cornering stability, and allow for a more impressive stance. | Easy bolt-on installation takes just minutes with standard hand tools. *Note: Factory wheel studs may need to be shortened to ensure safe fitment of the wheel. We recommend the use of a Torque Wrench to ensure proper tightening of hardware..
  • UNIVERSAL TIRE VALVE STEM CAPS: Included with purchase are 4 Universal Tire Valve Stem Caps precision CNC machined from Light-Weight T6 Billet Aluminum with anodized surface and rust & water-resistant polymer thread inserts to p....
Check Stock

Rying 6x5.5 Wheel Spacers for Tacoma Tundra 4 Runner FJ Cruiser Sequoia Land Cruiser GX460 GX470 1.5 inch 6x139.7 Hubcentric Wheel Spacers 106mm Hub Centric with 12x1.5 ET Lug Nuts.

  • SPECS 6x5.5 Wheel Spacers: (shown as second photo) Vehicle Bolt Pattern 6x5.5(6x139.7mm). Wheel Bolt Pattern (6x139.7mm). Hub bore: 106mm. Thickness:....
  • PACKAGE INCLUDES: 4x wheel spacers (1.5" per unit). 24 x open ET lug nuts. 2x user manual..
  • ADAPTATION: Compatible with 1989-2021 4 Runner, 2007-2020 FJ Cruiser, 2001-2007 Sequoia, 1993-1998 T100, 1995-2021 Tacoma 6 Lug Vehicle, 2005-2021....
  • ADVANTAGE: (1) Forged 6061-T6 Aluminum Alloy material, High-quality pre-installed heat treated 12.9-grade studs, enhances the strength of the wheel....
  • WARRANTY: Wheel spacer kit comes complete with a 2 Year warranty. Contact Seller customer service if you have any questions, We will solve your....
Check Stock

DCVAMOUS 4PC Black 6x5.5 Hubcentric Wheel Spacers 2 Inch with 12x1.5 Studs Compatible with Toyota 6 Lug 6x139.7 for 1995-2022 Tacoma | 1986-2022 4Runner | 2007-2014 FJ Cruiser | 2000-2006 Tundra

  • 【2" Hub-Centric Wheel Spacers】Give your vehicle that aggressive stance, eliminate rubbing, mount a larger wheel or tire, clear breaks or struts.....
  • 【6x5.5/6x139.7 Wheel Spacers Compatible with Toyota 6 Lug Vehicle】Perfect fitment: 1995-2022 Tacoma(Only vehicle with 6 lug wheels), 1996-2022....
  • 【Set of 4】Thickness: 2 inch / 50mm, Vehicle bolt pattern: 6x5.5" / 6x139.7mm, Wheel bolt pattern: 6x5.5" / 6x139.7mm, Center bore: 106mm, Thread....
  • 【Easy to use】With grade 10.9 studs, lug nuts, complete kit comes with everything needed for a complete installation..
  • 【Quality guarantee】Made of aerospace alloy aluminum 6061, T6 treatment, precision CNC machined, hard oxidation finished surface..
Check Stock

6x5.5 Hubcentric Wheel Spacer 1.5 38mm for Toyota Tacoma 4Runner Fortuner FJ Sequoia Tundra Ventury Hilux | Lexus GX460 GX470 4PCS 6x139.7mm Forged Wheel Adapters 106mm Hub Bore with M12x1.5 Studs

  • 【4PCS Wheel Spacers】- Thickness: 1.5"/38mm.
  • 【6x5.5 Wheel Adapters】- Compatible with 1995-2015 Tacoma (4WD/Pre-Runner/VVT-i) (not fit 2WD S-Runner or X-Runner) | 2016-2021 Tacoma | 1989-2021....
  • 【6x5.5 Wheel Adapters】- Compatible with 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 Lexus GX460 | 2002 2003 2004 2005 2006 2007....
  • 【6x5.5 Wheel Adapters】- Compatible with 1989-2009 Toyota Hilux SURF|1979-2020 Toyota Hilux 4WD|2015-2020 Toyota Hilux REVO.
  • 【High Quality】- Forged from 6061-T6 aluminum alloy, CNC automatically machined to ensure high precision and stability, with anodized and....
Check Stock

StanceMagic - 12mm (1/2 inch) 5x114.3 Hubcentric Wheel Spacers (60.1mm Bore) Compatible with Toyota Avalon Camry Supra Scion Tc Lexus ES300 ES330 ES350 IS250 IS300 IS350 GS300 GS350 (Black, Pack of 2)

  • StanceMagic Hubcentric Wheel Spacers - Fits vehicles with 5/114.3 (5/4.5") bolt pattern and 60.1mm Centerbore. Only compatible with Scion Toyota Lexus. WILL NOT FIT other vehicle makes. Compatible with Scion 2011-2016 tC, 2008-2015 xB. Compatible with Toyota Avalon, Camry, RAV4, MR2, Solara, Supra, Tacoma. Compatible with Lexus ES300h ES330 ES350 GS300 GS350 GS400 GS430 IS250 IS300 IS300 IS350 LS400 LS430 NX200t NX300 NX300h SC300 SC400 SC430. Check Year/Make/Model in Description..
  • [VERIFY FITMENT] Even if a vehicle is listed as compatible, buyers still need to check: 1) You have extended wheel studs (at least 12mm longer than stock) to ensure safe nut thread engagement.
  • 2) Are aware that this listing is for spacers only, that extended wheel studs are NOT INCLUDED.
  • 3) You have 1/2" (12mm) of space between your fender and your wheel/tire.
  • 4) Wheel bore needs to be no smaller than 60.1mm..
  • [SPECIFICATIONS] Two (2) Wheel Spacers with Lip | Thickness: 1/2" (12mm) Wide | Bolt Pattern: 5x114.3 (5x4.5") | Hub Center Bore: 60.1mm | Lip Diameter: 60.1mm | This listing is for Spacers Only, Extended Wheel Studs / Additional hardware Not Included. [MATERIAL ....
Check Stock

KSP Forged 4Pcs 1.25' 6x5.5 to 6x5.5 Wheel Spacers Thread Pitch 12x1.5 Hub Bore 106mm 6 Lug 32mm Hub Centric Wheel Spacers Fit for 4-Runner Tacoma Tundra FJ Cruiser Sequoia

  • 【Quality and Safety Assurance】The KSP 6×139.7 wheel spacers are REAL FORGED from Lightweight Anodized Black 6061-T6 Aluminum, is more heavy duty, durable and corrosion resistance. And they are specifically designed by in-house engineers and CNC machined to exact standards,ensuring the best fitment possible. By carefully measuring the OEM wheel hubs and bore dimensions, these 106mm hubcentirc spacers mount with minimal clearance to prevent any vibration, retaining the stock driving..
  • 【Improve】There may be not enough threads for the lug nuts to fit wheel spacers, especially for Tacoma and FJ. We highly recommend purchasing the extended lug nuts together（B07DLX519N）. There was a little surprise for you..
  • 【Specs】4PCS 1.25″ (32mm) Thickness | 6×5.5” Vehicle Bolt Pattern | 6×5.5” Wheel bolt pattern | 106mm Center Bore with lip | 12-1.5mm Threaded Studs/Nuts. Recommended torque: 72-80 FT/LBS. We laser engrave the sizing and part number info for an easy identification and individuation. NOTE: The spacer will not fit the front wheels with locking hub, such as some years Land Cruiser, Pickup etc..
  • 【Aggressive Look】The 32mm adapters are designed to move the wheel further out from the hub,fixes clearance issues, wheel hitting the b....
Check Stock

DCVAMOUS 4PC Black 6x5.5 Hubcentric Wheel Spacers 1.5 Inch w/ 12x1.5 Studs Compatible with Toyota 6 Lug for 1995-2021 Tacoma Only 6 Lugs | 1986-2021 4Runner | 2007-2014 FJ Cruiser | 2000-2006 Tundra

  • 【1.5" Hub-centric Wheel Spacers】Give your vehicle that aggressive stance, eliminate rubbing, mount a larger wheel or tire, clear breaks or struts.....
  • 【6x5.5/6x139.7 Wheel Spacers Compatible with Toyota 6 Lug Vehicle】Perfect fitment: 1995-2021 Tacoma(Only vehicle with 6 lug wheels), 1996-2021....
  • 【Set of 4】Thickness: 1.5 inch / 38mm, Vehicle bolt pattern: 6x5.5" / 6x139.7mm, Wheel bolt pattern: 6x5.5" / 6x139.7mm, Center bore: 106mm, Thread....
  • 【Easy to use】With grade 10.9 studs, lug nuts, complete kit comes with everything needed for a complete installation..
  • 【Quality guarantee】Made of aerospace alloy aluminum 6061, T6 treatment, precision CNC machined, hard oxidation finished surface..
Check Stock