Best Bending Radius

LC to LC Single Mode Insensitive Fiber Patch Cord - Duplex - 2M - UPC/UPC - 9/125um OS2 100G (5 Pack) / - Beyondtech PureOptics Cable Series

  • Beyondtech high-quality and Insensitive LC to LC Fiber Grade: G.657.A2 Patch Cable Single mode 9/125 OS2 fiber is specially designed for fast Ethernet, Fiber Channel, Gigabit Ethernet Speeds, data center, premises, educational, LAN, SAN, commercial, 10GBASE-L (1310 nm), 10GBASE-E (1550 nm), 1000BASE-LX (1300 nm) and Asynchronous Transfer Mode (ATM) applications. It supports video, data and voice services..
  • This Beyondtech Fiber OS2 9/125 LC/LC Fiber Patch Cord conforms with TIA/EIA 492AAAA and IEC60793-2-10 A1b standards and complies with RoHS specifications..
  • This SM fiber has an yellow color jacket with a 3.0mm diameter. OS2 cables have a 0.36 dB/km attenuation at 1550 nm – 0.22 dB/km at 1310 nm.
  • This LC to LC Single mode Duplex OS2 fiber patch cords operate at -40ºC to +75ºC and have a minimum installation bending radius of 5.0 cm and a minimum long term bending radius of 3 cm..
  • Reduced bend loss sensitivity versus standard telecom fiber patch cables: Optimal for Flexible Installations in indoor cable set-ups they could now be used in walls, ceilings, conduits (FTTH) and other bumpy surfaces without worrying about fiber bends..
Check Stock

Fiber Patch Cable, VANDESAIL 10G Gigabit Fiber Optic Cables with LC to LC Multimode OM3 Duplex 50/125 OFNP (1M, OM3-5Pack)

  • Beyondtech Pre-terminated connectors on both ends LC to LC Fiber Patch Cable Single mode 9/125 OS1 fiber is specially designed for fast Ethernet, Fiber Channel, Gigabit Ethernet Speeds, data center, premises, educational, LAN, SAN, commercial, 10GBASE-L (1310 nm), 10GBASE-E (1550 nm), 1000BASE-LX (1300 nm) and Asynchronous Transfer Mode (ATM) applications. It supports video, data and voice services..
  • This fiber OS1 LC LC 1 Meter LSZH Fiber Patch Cord conforms with TIA/EIA 492AAAA and IEC60793-2-10 A1b standards and complies with RoHS specifications..
  • This SM singlemode fiber has an yellow color jacket with a 3.00mm diameter. OS1 cables have a 0.25 dB/km attenuation at 1550 nm and 0.35 dB/km at 1310 nm..
  • This LC to LC Single mode Duplex OS1 fiber patch cords operate at -20ºC to +70ºC and have a minimum installation bending radius of 5.0 cm and a minimum long term bending radius of 3 cm..
  • OS1 patch cords allow for connections between patching panels and network and server equipment. OS1 9/125 patch cords are commonly used in passive applications (GPON, FTTX and LANs) - LC duplex connectors are joined with a plastic clip, easy to remove in case you need to separate the connectors..
Check Stock

Jimmy, The Well Dressed Man [feat. Eddie Jackson]

  • ...und Radius: Jackson pioneered the use of the innovative 12-16 Inch compound radius design, in which the maple fingerboard gradually flattens toward the heel from its more rounded profile at the nut. This makes for comfortable and natural-feeling chording and riffing near the nut, with optimal shred articulation and bending nearer the heel.
Check Stock

RIDGID 36117 403 Instrument Bender, 3/16-inch Tube Bender for Bends Up to 180 Degrees, Pipe Bender,Black/Silver,Small

  • Designed for bending annealed copper, steel and stainless with a wall thickness less than or equal to 0.06 inches (1.5 mm) to a maximum of 180 degrees.
  • Made with offset cushion grip handles for improved comfort when forming 180-degree bends.
  • A 90-degree start angle and unique oil-absorbing shoe minimizes bending effort while forming accurate bends.
  • Features measurements in both inches and millimeters.
  • Tube bender has a 3/16-inch tube size outside diameter capacity and 5/8-inch bend radius.
Check Stock

VEVOR Hydraulic Rebar Bender, 3000W, Electric Rebar Bender, 1-1/4'' / 32 mm #10 Grade 60 Max Rebar Diameter, Rebar Steel Bender Machine, Bending Machine For Bending Rebar, Steel Bar, Steel

  • 6-7S Ultra-Fast Bending Speed: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1-1/4" #10 Grade 60(6 to 32 mm) within 6 to 7 seconds. Bending Angle: 0-180°,Bending Radius: 1.97'' / 50 mm, Max. Rebar Hardness: HRC30..
  • 3000W Pure Copper Coil Motor: This portable rebar bender features a 3000W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this electric rebar machine's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 26A, Noise: 105 dB(A)..
  • Angle Adjustment Knobs: This rebar bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When operating under point 2, fix angle of point 2 same as or no larger than point 1 of 5 degree, to ensure that under the condition when exterior shock attacks the machine itself will not move to left and right to operate the machine..
  • Sturdy Machine Body: The electric bender machine adopts a sturdy iron machine body and durable Idler Wheel. φ78 / 109 Fixed Idler Wheel ....
Check Stock

BEYONDTECH SC/APC to SC/APC Fiber Patch Cable Single Mode Simplex - 1m (3.28ft) - 9/125um OS1 / 3.0mm LSZH (1 Pack) - Fios Cable Replacement PureOptics Cable Series

  • ... This SM fiber has an yellow color jacket with a 3.0mm diameter. OS2 cables have a 0.36 dB/km attenuation at 1550 nm - 0.22 dB/km at 1310 nm..
  • This SC to SC Single mode Simplex OS2 fiber patch cords operate at -40ºC to +75ºC and have a minimum installation bending radius of 5.0 cm and a minimum long term bending radius of 3 cm..
  • Reduced bend loss sensitivity versus standard telecom fiber patch cables: Optimal for Flexible Installations in indoor cable set-ups they could now be used in walls, ceilings, conduits (FTTH) and other bumpy surfaces without worrying about fiber bends..
Check Stock

VEVOR Hydraulic Rebar Bender, 3000 Wattage Electric Rebar Bender, 1-1/4'' / 32 mm #10 Grade 60 Max Rebar Diameter, Rebar Steel Bender Machine, Bending Machine for Bending Rebar, Steel Bar, Steel Rod

  • 6-7S Ultra-Fast Bending Speed: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1-1/4" #10 Grade 60(6 to 32 mm) within 6 to 7 seconds. Bending Angle: 0-180°,Bending Radius: 1.97'' / 50 mm, Max. Rebar Hardness: HRC30..
  • 3000W Pure Copper Coil Motor: This portable rebar bender features a 3000W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this electric rebar machine's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 26A, Noise: 105 dB(A)..
  • Angle Adjustment Knobs: This rebar bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When operating under point 2, fix angle of point 2 same as or no larger than point 1 of 5 degree, to ensure that under the condition when exterior shock attacks the machine itself will not move to left and right to operate the machine..
  • Sturdy Machine Body: The electric bender machine adopts a sturdy iron machine body and durable Idler Wheel. φ78 / 109 Fixed Idler Wheel ....
Check Stock

VEVOR Hydraulic Rebar Bender, 1700W, Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

  • Ultra-Fast Working Speed: This rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. It can also cut rebar within 5-6 seconds. Bending Angle: 0-180°. Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46..
  • 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)..
  • Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
  • Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy t....
Check Stock

VEVOR Hydraulic Rebar Bender 1700 Wattage Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

  • Ultra-Fast Working Speed: This rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. It can also cut rebar within 5-6 seconds. Bending Angle: 0-180°. Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46..
  • 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)..
  • Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
  • Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy t....
Check Stock