Best Bed Frame Clamp

4Pack Adjustable Bed Risers with Screw Clamp, Couch Risers Fit for Furniture Thickness 0-1.5 In, Elevation in Heights 4 In Heavy Duty Risers for Sofa Desk Chair Cabinet Supports 20000 Pounds(Brown)

  • 【Needn't Drill Hole, Adjustable Clamp Mount Design】 GALOYAU Furniture frame risers: install the clamp directly on the furniture or bed frame, so you don't need to damage your furniture by drilling a hole. The clamp is suitable for bed frames or furniture with a thickness of 0 inches to 1.5 inches. Heightened groove protection: 30mm/1.18'', you can adjust the gap at will, lock it with the attached screwdriver, it will be firm and never fall off..
  • 【Durable Sturdy Material with Special Felt Pad】 Adjustable bed risers made of strong hard plastic material, the furniture riser is super durable, and the four risers can support high duty of 20,000lbs. The bottom special felt pad helps protect wood, carpet and all kinds of floors without scratching. and at the same time they plays a role in sound insulation, Insulation, heat insulation effect..
  • 【Protect Furniture Legs, Great for Robot Vacuums】 Furniture risers with screw clamp fit for sofa risers, bed risers, table, mattresses, closets, office chairs risers and nightstands. Protect the legs of high quality furniture for decades. The riser with a total height of 134mm/5.3 inches can actually in....
Check Stock

Prime-Line U 11310 Bed Frame Rail Clamp Kit, Fits 1 inch and 1-1/4 inch Frames, Steel Construction, Zinc Plated, 2 Sets

  • Clamp sets in this kit fit adjustable-width bed frame rails that measure 1 in x 1 in and 1-1/4 in x 1-1/4 in.
  • Assembly is as easy as sliding these clamps over the coupled meeting bed frame rails.
  • Fits bed frame railing of 1 in. x 1 in. and 1-1/4 in. x 1-1/4 in. sizes.
  • Steel constructed components with zinc plated finish.
  • Kit includes 2 sets of bed frame clamps and 1 set pair of bolts to be used with the clamps that fit.
Check Stock

BEIBECOOL Bed Sheet Holder Bed Sheet Clip Bed Sheet Frame Upgraded to Replace The Old Cross Clip Bed Sheet with 24pcs/Set (Gray)

  • Note: The bed sheet holder is equipped with a bed sheet clip and a bed sheet frame. This product is suitable for mattresses with a thickness of more than 3 inches. It is suitable for bed frames without a bed box or with a height box of less than 2 inches! Sheet holder is not suitable for high elastic foam mattress..
  • Easy to Install: The sheet holder consists of 12 clips and 12 shelves. No matter the size of the space, it can be installed without turning the mattress, and it is safe and firm to keep the sheets comfortable and the mattress does not slide! After the bed sheet is laid on the mattress, insert the U-shaped opening of the bed sheet clamp into the raised edge of the bed sheet frame to clamp the bed sheet in it and fix the bed sheet..
  • Material: the 12 sheet clips are made of PP plastic, softened at about 155 ℃, and used at -30~140 ℃. The 12 bedspreads are made of ABS plastic. The heat deformation temperature of ABS is 93~118 ℃, which can be used for a long time in the range of -40~100 ℃..
  • Please read the precautions, instructions and installation drawings carefully. The trouble of bed sheet sliding can be solved by correctly installing the bed sheet holder. If you don't know how to install, you can watch the installation video several ti....
Check Stock

4 Pcs Bed Frame Legs, Adjustable 7.08'-13' Bed Frame Support, Metal Bed Support Legs, Heavy Duty Bed Legs Replacement, TELANKS Bed Frame feet(4)

  • 【Bed Support Legs】: Without proper center support, the weight of the mattress will cause the wooden slats to bend or break. The bed frame leg replacement can provide the necessary support for the wooden slats to protect your bed and mattress from sagging and damage. Central slat support legs, no need to downgrade your mattress or give up your favorite bed frame..
  • 【Bed frame legs】: The original height of the bed legs is 7.08" (with mounting plate), and the adjustable height is 5.9". Just slightly turn to the right to adjust the height (adjust from 7.08" to 12.99' '). For structural stability, we do not recommend adjusting the bed frame legs to the maximum size..
  • 【Easy to install】: Furniture legs are simple in structure and easy to install. When the bed frame has holes, directly use the bracket to align the double holes and put the screws to adjust the distance, and then tighten them. When the bed frame has no holes, use the feet and the bed frame to place it in a crisscross style, place the counter-piece on the corresponding bracket on the bed frame, clamp the bed frame, put in the screws to adjust the distance, and tighten it. Suitable for most bed..
  • 【Sturdy and durable】: Bed support legsare made of stainless steel, with thick tube ....
Check Stock

2Pcs Adjustable Height Center Support Leg for Bed Frame Bed Center Slat Heavy Support Leg Extra Durable Steel Furniture Foot | Suitable for Bed Frame Sofa Furniture Cabine Foot Legs 7.08 -13.3

  • Function:Its adjustable-height（Adjusts from 7.08″ to 13.3″） center support leg for bed frame is designed to match different beds' heights to protect your bed and mattress from damage or sagging. The support leg is suitable for bed frame, bed center slat、Sofa Furniture Cabine and other furniture..
  • Easy to install: T-shaped feet, no punching, easy to install. When the bed frame has holes, directly use the bracket to align the double holes and put the screws to adjust the distance, and then tighten them. When the bed frame has no holes, use the feet and the bed frame to place it in a crisscross style, place the counter-piece on the corresponding bracket on the bed frame, clamp the bed frame, put in the screws to adjust the distance, and tighten it..
  • Material: Made form high quality steel, Electrophoresis black to prevent rust and corrosion, ensuring a long life and preventing damage to your bed. we have thickened the pipe wall to make it more load-bearing. Leg bottom PVC pad are non-slip and wear resistant, won't be harm and scratches to your floors and it has better grip..
  • Hardware included: 2 pcs Height Adjustable from 7.08" to 13.38" Adjustable Height Center Support Leg,4pcs 2.48"screw，2pcs supplementary plate. No extra trips to the Hardware....
Check Stock

Bed Claw Heavy-Duty Hook-On 82\ x 6\ Replacement Queen/King Wood Bed Side Rails, Bed Frame (Medium Finish)

  • ...ithout proper center support, the weight of the mattress will cause the wooden slats to bend or break. The furniture legs can add necessary support to the wooden slats to protect your bed and mattress from sagging and damage. Central slat support legs, no need to downgrade your mattress or give up your favorite bed frame..
  • 【Adjustable table leg】: The original height of the table leg is 7 in (with mounting plate) and the adjustable height is 5.9 in. The height can be adjusted by just turning it slightly (adjusted from 7" to 13"). The length of the mounting plate is 4.3 in..
  • 【High-quality material】: The bed frame support is made of stainless steel, and the surface is painted to prevent rust. Thicker material, stable support. The furniture legs are made of rubber base, which will not damage or scratch your beautiful floor, and at the same time can reduce noise..
  • 【Easy to install】: The furniture legs are simple in structure and easy to install. When the bed frame has holes, directly use the bracket to align the double holes and put the screws to adjust the distance, and then tighten them. When the bed frame has no holes, use the feet and the bed frame to place it in a crisscross style, place the counter-piece on the corresponding bracket on the ....
Check Stock

Slide-Co 241947 Bed Frame Rail Clamp with 1" Frame, Small, Zinc

  • Constructed of heavy gauge steel and solid steel bolt fastener.
  • Clamp and bolt fastener comes finished in a corrosion resistant, zinc plated finish.
  • Used with 1-1/4 inch x 1-1/4 inch wide bed frame L-angle material.
  • Hand tightening should be all that is necessary for setting bed frame width, but pliers can be used for tightening with slightly increased torque if frame halves keep spreading easily.
Check Stock

Forzaddik Floating Nightstand Bed Side Shelf Tray, for Bunk Bed/Dorm/Kids Room

  • PERFECT BUNK BED SHELF NEXT TO BED – keep essentials at arm's reach, and solve the “lack of nightstand” problem of sleeping in the top of bunk bed, or no space for night table.
  • EXCELLENT SPACE SAVING SOLUTION – maximize your space and perfectly organize phones, tablets, charging cables, remotes, pen, books, eyeglasses, alarms, cup, and more. Ideal for college dorms, kids room, balcony, lofts, apartment or small space.
  • INNOVATIVE & PRATICAL DESIGN - design with adjustable strong clamp system, fits most bed frames, lofts beds, headboards, bunk beds. Also has innovative convenient design: Tablet/phone standing slots, charging cable/cord holder slots (3 sides), built-in cup holder, pen holder slot, 5 cable slots (underneath).
  • NO TOOLS OR ASSEMBLY REQUIRED – simply attach the tray over the bed frame and tighten the 2 knobs straight away. Fits most bed frames/rails and bunk beds. Quick set up!.
  • PRODUCT DIMENSIONS – 13.8" (L) x 9.6" (W). Suits for bed frame size between 0.6" to 3.4" inch.
Check Stock

Semi Electric Hospital Bed with Half Rails Included - for Home Care Use and Medical Facilities - Fully Adjustable, Easy Transport Casters, Remote - 80\ x 36\ - No Mattress

  • FULL BED PACKAGE: This semi electric motorized hospital bed includes everything you need, including the adjustable bed frame, 2 locking and 2 unlocking casters (wheels), a large button remote controller and half safety rails..
  • BED SPECS: Measuring 80 x 36 inches, it has a height range of 15" - 20". Lightweight, it weighs 42 lbs and has a weight capacity of 450 lbs. The deck is split spring. Both the head-spring and foot assembly are recessed to prevent pinching and injuries..
  • HALF RAILS INCLUDED: These safety rails clamp on and off easily. An easy release button enables each rail to be independently lowered or raised simply. The bars are less than 4" apart. These universal rails are also compatible with Drive, Invacare, Medline and most split spring hospital beds..
  • COMFORT, CONVENIENCE, QUALITY: Easily adjust the bed to the height and position you need. The bed frame is simple to assemble, cleans easily, and the parts are compatible with other hospital beds. Backed by a 2 year manufacturer's warranty..
  • COMPATIBLE WITH ALL HOSPITAL BED MATTRESSES: Any standard size hospital mattress will fit this frame. Whether you want to use a foam, spring or alternating pressure air mattress, this frame will be perfect..
Check Stock