Best Baseboard Heater For 40square Feet

Baseboarders Stainless Steel Heat Cover Replacements for Tall Heaters - 5 ft Panel [Accessories Not Included]

  • ✔️✔️ 5 FT PANEL: Premium replacement baseboard heater cover panel - Must purchase a Baseboarders branded accessories to properly finish installing this product. Please review installation instructions.
  • ✔️✔️ EASY DIY INSTALLATION - Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. No tools or hired help is needed..
  • ✔️✔️ PREMIUM GALVANIZED STEEL: Compared to plastic galvanized steel replacement baseboard heater covers not only last longer but will hold their beauty longer than plastic or other basic materials.
  • ✔️✔️ EXCLUSIVELY FOR TALL HEATERS: Pairing a panel and standard height products will result in products not correctly, or not fitting at all..
  • ✔️✔️ ADDITIONAL 2 INCHES OF HEIGHT: The standard baseboard heater is 6.75 inches. These tall units are 8.75 inches x 3 inches..
Check Stock

Cadet 30 115/120 Volt 1,280/1,706 BTU White Baseboard Heater

  • Convection heats the room rapidly, without uneven hot and cold zones, providing comfort from floor to ceiling..
  • Wire up and connect this baseboard quickly and easily with its large wiring compartment, dual knockouts and built-in cable clamp..
  • For worry-free warmth, the unit's overheat protection feature prevents the heater from running when its air intake is blocked..
  • This baseboard heater installs unobtrusively in bedrooms, bathrooms, living rooms and dens, thanks to its low-profile design..
  • This baseboard model is UL listed to provide safe heating even when mounted flush to the wall or directly on flooring, tile or carpet..
Check Stock

Fahrenheat F2514 4' 120V Baseboard Heater, 48\ Wide, Northern White

  • Convection heats the room rapidly, without uneven hot and cold zones, providing comfort from floor to ceiling.
  • Wire up and connect this baseboard quickly and easily with its large wiring compartment, dual knockouts and built-in cable clamp.
  • For worry-free warmth, the unit's overheat protection feature prevents the heater from running when its air intake is blocked.
  • This baseboard heater installs unobtrusively in bedrooms, bathrooms, living rooms and dens, thanks to its low-profile design.
  • This baseboard model is UL listed to provide safe heating even when mounted flush to the wall or directly on flooring, tile or carpet..
Check Stock

Comfort Zone CZ650B 750/1,500-Watt Electric Baseboard Space Heater with Digital Thermostat Dent-Proof End Panels Overheat Protection System Safety Tip-Over Switch & Stay-Cool Body Black

  • ☀️PLENTY OF POWER: Ideal for medium-sized rooms, this 1500-watt convection heater features 2 heat settings and a digital adjustable thermostat....
  • ☀️SILENT OPERATION: This electric baseboard heater operates quietly to ensure that room occupants aren't disturbed. Keep your TV or music at a....
  • ☀️ADVANCED SAFETY: Features an advanced safety system that includes a safety tip-over switch, stay-cool body and overheat protection sensor..
  • ☀️DENT-PROOF ENDS: The end panels on this sleek, low-profile convection baseboard heater are dent-proof, so it won't start to look beat up with....
  • ☀️HELPS LOWER HOME HEATING COSTS: An electric baseboard heater with thermostat helps lower home heating costs by providing targeted heat in the....
Check Stock

Baseboarders Premium 4 ft Galvanized Steel Easy Slip-On Baseboard Heater Cover - White (No Accessory)

  • Baseboarders Premium Series Panel only includes the replacement heater panel cover. Baseboarders Premium Series End Caps (Closed EC001-RT,LF-WHT, Open EC002-RT,LF-WHT, Zero ZC001-WHT)are sold separately. When combined with end caps the panel can span between 48”-51.5”.
  • Baseboarders Premium Series end caps, corners, and couplers are only compatible with our own branded Premium Series panels. They will not retrofit to existing baseboard heaters without a Premium Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electr....
Check Stock

Comfort Zone Howard Berger Co Electric Radiant Baseboard Heater CZ600

  • Heavy-gauge heating element for silent, even heating / 3-position rotary switch.
  • Electric baseboard heater model number: CZ600 / No assembly required.
  • Safety overheat protection system / Baseboard heater.
  • Stay-cool high-impact end panels / 750W to 1500W / Power indicator light.
  • Safety tip-over cut-off switch / Metal body / Mesh grill cover.
Check Stock

Baseboarders Elliptus Series Galvanized Steel Easy Slip-On Baseboard Heater Cover in White (2 ft, Cover, No Accessory)

  • Baseboarders Elliptus Series Panel only includes the replacement heater panel cover. Baseboarders Elliptus Series Endcaps (Closed EC005-LF,RT-WHT, Open EC006-LF,RT-WHT, Zero ZC005-WHT) are sold separately. When combined with end caps the panel can span between 24”-27.5”.
  • Baseboarders Elliptus Series end caps, corners, and couplers are only compatible with our own branded Basic Series panels. They will not retrofit to existing baseboard heaters without a Basic Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electri....
Check Stock

Cadet F Series 49 Portable Electric Baseboard Heater Model 4P1500W Part 05601 5120 BTU 120 Volt 1500 Watt White

  • Convection heats the room rapidly, without uneven hot and cold zones, providing comfort from floor to ceiling..
  • Wire up and connect this baseboard quickly and easily with its large wiring compartment, dual knockouts and built-in cable clamp..
  • For worry-free warmth, the unit's overheat protection feature prevents the heater from running when its air intake is blocked..
  • This baseboard heater installs unobtrusively in bedrooms, bathrooms, living rooms and dens, thanks to its low-profile design..
  • This baseboard model is UL listed to provide safe heating even when mounted flush to the wall or directly on flooring, tile or carpet..
Check Stock

Mr. Heater F215100 MH4B Little Buddy 3800-BTU Indoor Safe Propane Heater, Medium , Black/Red

  • Indoor-safe portable propane heater for rooms up to 95 square feet. THIS UNIT IS NOT INTENDED FOR GOLF CART USE OR FOR MOTORIZED VEHICLES..
  • Continuous odor-free, 45-degree heating angle. Maximum Elevation (Ft) 7000 Feet. Automatic low oxygen shut-off system (ODS). Perfect solution for heating small enclosed spaces like tents up to 95 square feet.
  • uses 1-pound disposable propane cylinder (not included). Run time at minimum btu and maximum btu is 5.6 hours. Do­ not­ operate­ heater­ in­ any ­moving­ vehicle. This ­heater ­requires ­a­ vent­ area­ of­ 4­ square­ inches­ minimum ­for­ adequate ventilation ­during­ operation.
  • Low-oxygen sensor and accidental tip-over switch with auto shut-off for safety.THE USE OF UN-AUTHORIZED ACCESSORIES/ATTACHMENTS WITH THIS HEATER ARE EXPRESSLY PROHIBITED, MAY CAUSE SERIOUS INJURY, AND WILL VOID THE WARRANTY..
  • Recommended for emergency heat, tents, campers, workshops, job sites, porches, patios, decks, garages, storage buildings, picnics, tailgate parties, construction trailers, sporting events, barns, sheds, hunting blinds, shelters and ice fishing shanties.
Check Stock