Best Ball Lock Stainless Steel

TMCRAFT 2.6 Gallon Mini Ball Lock Keg, Stainless Steel Double Ball Lock Post Corny Keg with Quick Disconnect Set for Home-brewing(10L)

  • STAINLESS STEEL: This corny keg is constructed with food grade stainless steel which keeps beer fresh for few months, and the high-strength stainless steel can withstand higher co2 pressure..
  • PORTABLE: 2.6 Gallon capacity can be stored and taken anywhere. Measures 8.9″L x 8.9″W x 14.6″H. Dual metal handle contribute to carry. Also easily stackable once disconnects have been attached..
  • BALL LOCK SYSTEM: Double ball lock post design allows this corny keg to connect ball lock quick disconnect set, allows easily carbonate home-brew and more options of extra functions for your kegging system (2 quick ball lock disconnect set included)..
  • RELIEF VALVE: Ball lock mini keg equipped with relief valve allows you to control the pressure in the keg through pulling on the pressure-relieving ring for a couple seconds..
  • ONE YEAR WARRANTY: Message us 24/7 via Amazon for full support and service if you are not fully satisfied with our mini keg or it does not perform to your expectations..
Check Stock

Keg Disconnect Ball Lock MFL Ball Lock Fittings Keg Connectors – Keg Coupler Stainless Ball Lock Keg Fittings 12-Piece

  • ...(OD) fitted for 1/4-inch or 3/16-inch inside diameter (ID) hoses on your 3, 5, or 10 gallon keg.
  • BUILT TO LAST: Keg ball lock quick disconnects and hose clamp wings constructed from ABS plastic that resists rust and corrosion.
  • Swivel nuts and clamps constructed from food-grade stainless steel for maximum strength and longevity.
  • INSTALL EASILY: Tighten the swivel nut connecting the flare fitting before use.
  • Ensure correct fittings are installed on input and output posts – Light gray disconnect for gas inlet and black disconnect for fluid outlet.
  • To install fittings, pull up lever on ball lock disconnect and push down on the correct ball lock (gas/fluid will flow once connected).
  • 5/16-inch barb connects your hose and screws/unscrews from fitting.
  • Included hose clamps tighten seal on hose and are winged for easier use.
  • PACKAGE CONTENTS: CO2 Ball Lock Disconnect Stainless Steel Keg Lock package includes (12) pieces total (6 per keg) – (2) ball lock liquid disconnect fittings, (2) ball lock gas disconnect fittings, (4) swivel nuts, and (4) hose clamps for your convenience.
Check Stock

Weigh Safe 180 Hitch LTB4-2-KA Aluminum Adjustable Trailer Hitch w/ Stainless Steel Tow Balls, 4\ Drop Hitch for 2\ Receiver w/ 2 pc Keyed Alike Lock Set, Heavy Duty Ball Mount - 12,500 GTW

  • STAINLESS STEEL TURNOVER BALL: 4" adjustable trailer hitch with stainless steel tow balls (2" tow ball and 2-5/16" tow ball), compatible with 2" receivers and trailers with 2" and 2-5/16" couplers.
  • 4" ADJUSTABLE BALL MOUNT: 4” drop hitch & 5" rise hitch, adjusts in 1" increments so you get the perfect fit for any trailer height - Secured using Anti-Theft Locking Design to protect your drop hitch.
  • HEAVY-DUTY TOWING CAPACITY: Made of 18 lbs of Aircraft Grade Aluminum & Stainless steel, with an industry leading towing capacity (GTW) of 18,500 lbs. Weigh Safe hitch is as tough as they come!.
  • INCLUDES KEYED ALIKE TWO PIECE SET: Keyed Alike Dual Pin Lock and Receiver Pin Lock to secure your hitch using only one key! No need for multiple keys for your ball mount with this Anti Theft Design.
  • TRAILER HITCHES MADE IN USA: Heavy duty aluminum hitch w/ built-in tongue weight gauge for safe towing (Lifetime Gauge Warranty Included), 2 stainless steel tow balls, 2 pc lock set, & dust lock cover.
Check Stock

180 HITCH LTB6-2.5 Aluminum Adjustable 6\ Drop, Stainless Steel Ball for 2.5\ Receiver 18,500 GTW

  • 1. 180 Hitch Stainless Steel Edition: Quick Exchange, Heavy-Duty Towing Capacity & PROUDLY MADE IN THE USA.
  • 2. Adjustable Ball Mount: 6" Drop for 2.5" Receiver. Adjusts in 1" increments with Dual Pin Lock.
  • 3. Heavy Duty Tow Capacity: 17 lbs of Billet Aluminum with 18,500 Weight Rating & 2,200 tongue weight.
  • 4. Corrosion Resistant Combo Ball: Swap Tow Ball Sizes Quickly w/ corrosion resistance Stainless Steel Ball.
  • 5. Road Ready: 6" Drop Drawbar, Slider, Stainless Combo Ball, Dual Pin Lock, Dust Cover & Warranty.
Check Stock

VORTEK EDC 8Cr13MoV Blade G10 Handles Ball Bearing Folding Pocket Knife

  • Ball Bearing Pivot System: With it's stainless steel ball bearing pivot system this knife opens and closes extremely smooth.
  • 8Cr13MoV Stainless Steel Blade: 8Cr13MoV stainless steel is an excellent choice for an everyday carrying pocket knife. It holds a sharp edge really well and is easy to maintain and keep sharp.
  • Sturdy Liner Lock: Using a liner lock allows the blade to lock open securely for safe use each and every time. This knife also includes a stainless steel pocket clip for everyday carry.
  • Tough G10 Handles: G10 Handles are one of the best handle materials you can use on a knife. G10 handles provide superior grip in wet or dry conditions.
  • SPECS: 8" Overall - 3.5" Blade - 4.5" Closed - 5.8 ounces.
Check Stock

VORTEK Ball Bearing Pivot System Folding Pocket Knife, Everyday Carry, 8Cr13MOV Straight Back Blade

  • Ball Bearing Pivot System: With it's stainless steel ball bearing pivot system, this knife opens and closes extremely smooth.
  • 8Cr13MoV Stainless Steel Blade: 8Cr13MoV stainless steel is an excellent choice for an everyday carrying pocket knife. It holds a sharp edge really well, is easy to maintain and keep sharp..
  • Tough G10 Handles: G10 Handles are one of the best handle materials you can use on a knife. G10 handles provide superior grip in wet or dry conditions.
  • Sturdy Liner Lock: Using a liner lock allows the blade to lock open securely for safe use each and every time. This knife also includes a stainless steel pocket clip for everyday carry.
  • SPECS: 3.5" Blade - 8.25" Overall - 4.75" Closed - 4.20 Ounces.
Check Stock

Weigh Safe 180 Hitch LTB6-2-KA 6' Drop Hitch, 6' Receiver 12,500 LBS GTW - Adjustable Aluminum Trailer Hitch Ball Mount & Stainless Steel Combo Ball, Keyed Alike Key Lock and Hitch Pin

  • WEIGH SAFE 180 HITCH STAINLESS STEEL EDITION: Introducing the Weigh Safe 180-degree Hitch Stainless Steel Edition, the Best-Looking/Rugged drop hitch on the market. The 180 Hitch Stainless Steel Edition with quick exchange, easy adjustment, and heavy-duty towing capacity is designed to function perfectly with all of your trailers in order to satisfy all your towing needs. The 180 Hitch is the definition of adaptability and ease, with an array of hitch ball sizes, and premium aluminum components.
  • ADJUSTABLE BALL MOUNT: This 6 Inch drop hitch is a dream come true, allowing you to tow trailers of different heights with the same vehicle. The drop hitch adjusts in 1" increments so you get the perfect fit every time. All Weigh Safe ball mounts come standard with a high strength Dual Pin Lock that secures your trailer to your drawbar. All our locks come standard with a custom fitted dust cover to increase longevity. Fits 2” Receivers -SUV's, F-150, Chevy 1500, Ram 1500, Tundra, Titan, etc.
  • HEAVY-DUTY TOWING CAPACITY (GTW 12,500 LBS): Made of 17 lbs. of solid Aircraft Grade Billet Aluminum & Stainless steel this hitch is as tough as they come, with a towing capacity (GTW) of 12,500 lbs. on the 2 5/16" ball, 8,000 LBS on the 2" ball, and 1,500 lbs. max t....
Check Stock

VORTEK DropShot EDC Folding Pocket Knife: Ball Bearing Pivot, 8Cr13MoV Blade, Deep Carry Pocket Clip, Smooth Fast Everyday

  • Ball Bearing Pivot: With it's stainless steel ball bearing pivot system this knife manually opens and closes extremely smooth.
  • 8Cr13MoV Stainless Steel Blade: 8Cr13MoV stainless steel is an excellent choice for an everyday carrying pocket knife. It holds a sharp edge really well and is easy to maintain and keep sharp.
  • Tough G10 Handles: G10 Handles are one of the best handle materials you can use on a knife. G10 handles provide superior grip in wet or dry conditions.
  • Sturdy Liner Lock: Using a liner lock allows the blade to lock open securely for safe use each and every time. This knife also includes a stainless steel pocket clip for everyday carry.
  • SPECS: 3.50" Blade - 8.50" Overall - 5" Closed - 4.37 Ounces.
Check Stock

180 Hitch LTB8-3-KA Aluminum Adjustable 8\ Drop, Stainless Steel Ball, 3\ Receiver 21,000 GTW

  • 180 HITCH STAINLESS EDITION: Quick Exchange, Heavy-Duty Towing Capacity & PROUDLY MADE IN THE USA.
  • ADJUSTABLE BALL MOUNT: 8" Drop for 3" Receiver. Adjusts in 1" increments with Dual Pin Lock.
  • HEAVY-DUTY TOWING CAPACITY: 23lbs of Billet Aluminum w/ 21,000 Weight Rating & 2,200 tongue weight.
  • CORROSION RESISTANT COMBO BALL: Swap Ball Sizes Quickly w/ corrosion resistance Stainless Steel Ball.
  • ROAD READY: 8" Drop Drawbar, Slider, Stainless Combo Ball, 2pc Lock Set, Dust Cover & Warranty.
Check Stock