Best Back Pressure Check Valve

4 Way Gas Distribution Co2 Distributor Manifold With 5/16 inch Barb/Stem Splitter Beer Integrated Check Valves for Homebrew Beer Making Brewing Tool

  • ???? Gas Manifold, Machined from a single piece of aluminum with built-in check valve protects your shunt and prevents gas backflow..
  • ???? Designed with a 2-point screw hole on the top for easy installation to other equipment. 5/16″ threaded ports barbed inlet and 5/16″ barbed outlets..
  • ???? The distributor allows you to split the gas supply into multiple lines. Each line has its own shutoff valve. Chrome Plated valves with spring loaded Ball check valve. Run with 4 lines from one CO2 source..
  • ???? Due to the one-way valve mechanism, the pressure drop between the ball valves in these manifolds is approximately 2 psi. You will need to set the pressure on the regulator to 2 psi above the pressure required in the keg.).
  • ???? Made of prime aluminum, brass and stainless steel material, which is extremely durable. MONEY-BACK GUARANTEE -customer satisfaction is our #1 policy!. If you are not satisfied with our product or if you experience any issues, Please contact us.
Check Stock

Aquarium DIY CO2 Generator System Kit CO2 Generator System with Solenoid Valve Bubble Counter Check Bubble Diffuser Carbon Dioxide Reactor Kit for Plants Aquarium

  • ✪【Be made of aluminum alloy】It is strong, durable and efficient. Well-sealed caps and pipes, leak-proof, non-deformed, never loose. Professional pressure guage for pressure watching. Cheap, simple to create pure CO2 constantly by chemical reactions..
  • ✪【Solenoid valve】To control the on and off of CO2 generator system using with a timer(not included). Bubble counter with check valve: Flow-rate of CO2 gas indication device and prevent water flow back into the bottle..
  • ✪【Equipped with a safety valve】The pressure is greater than 4kg pressure will relief automatically, carbonated beverage bottle pressure is 8kg, safety is ensured..
  • ✪【The safety valve supports manual pressure relief】When the pressure is below 4kg, it can be manually relieved by pull the ring of the safety valve. It is very safe..
  • ✪【Come with a bubble diffuser】Refine the bubbles and make it easy to dissolve in water and be absorbed by plants. Inject to your aquarium with CO2 quickly and easily..
Check Stock

2 PCS 1/4" 6mm Non Return One Way Check Valve for Fuel Line Oil Petrol Diesel Aluminium Silver

  • 【High Quality】This check valve made of premium aluminum alloy can use longer than the plastic one. Stable characteristics, high reliability..
  • 【Features】The push-lock design of the connector stop the hose from sliding off and easy to connect. it prevents fuel from returning back to the tank and keeps it in the line..
  • 【Application】This inline check valve is suitable for petrol, diesel, water, oil. Great for water pressure pumps and galley pumps which are not self-priming. Ideal for marine, automotive, caravans/RV, and agriculture..
  • 【Easy Installation】Arrow marked on the valve, refer to the arrow while connecting the fuel line. Opening pressure: 0.2 bar, Working pressure range: 0.2 - 6 bar, Operating temperature range: -30°C - 130°C..
  • 【Service】100% satisfaction guarantee, If you have any issues with the part, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..
Check Stock

Electric Fuel Pump 12v Universal - Low Pressure 2.5-4 PSI Inline Fuel Pump for Lawn Mower Carburetor Gas Diesel Engine HEP-02A

  • Inlet and Outlet diameter: 8mm (5/16 inch)..
  • Electric Fuel Pump 12v Universal, fits for lawn mower marine motorcycle carburetor, all 12 volt cars, trucks, boats & generators with gas diesel gasoline petrol engine.
  • Fuel Transfer Pump, 2 bolt fixing, 2 wires design, build-in check valve designed to prevent back flow..
  • Low Pressure Fuel Pump, build-in check valve design to prevent back flow, light-weight and small size, plunger-type fuel supply, suction stronger, more stable oil supply.12 Volt Fuel Pump, two-wire design, can be used as booster, standby unit or as a completely independent fuel pump installation and mounted anywhere..
  • 1-Year-Warranty, made of High Quality & Durable Material, manufactured in ISO 9000 / ISO 9001 / ISO 9002 Certified Facilities and 100% mechanically tested ensures optimal performance and enhanced durability.
Check Stock

X AUTOHAUX 4 Pcs 39mm Screw-on Valve Cap Stem Extension Wheel Tire Cap Extender Adapter for Auto Car Truck Chrome Plated Brass

  • [Durable Performance] The chrome plated brass surface is durable and waterproof, which prolongs the service life of the original tire valve screws..
  • [Screw-on Design] This extension valve cap is screwed on instead of the original valve cap and doesn't need to be removed to check air pressure or to....
  • [Easy Installation] Easy to install, simply screw onto current tire stem, no additional dust cap required..
  • [Increase Tire Life Span] This screw-on valve cap stem extension will increase tire life span, lower fuel consumption and increase driving safety..
  • [Easy to Check Pressure] It is very easy to check tire pressure without losing your valve caps and effectively prevent gradual loss of air..
Check Stock

2 Premium - Red Single Blade Inflatable Light Saber Swords, Lightsaber, Party, Gift, Action Play, Blow up Darth Vader (Red 1-Blade)

  • Pack of 2 premium inflatable swords. Darth Vader red single blade..
  • New design: Longer, stronger, and better fight action! Great for high-energy low-impact battle..
  • Customize stiffness and impact level by adjusting air pressure. These sabers can be inflated extra-firm to ridged with an air pump, or compressor. They will swell in diameter with over inflation, so try to keep the air pressure at a minimum to achieve the desired firmness, but maintain the original shape..
  • Easy inflation: One-way check valve incorporated in Inlet to help prevent air from escaping while inflating. For best results: Press back of inlet to help establish the seal prior to initial inflation. Inflate, and hold finger over inlet for a few seconds. This gives the check valve time to rest and seal, and helps maintain air between breaths. Close valve, wait a minute or so for the plastic to relax, and inflate further to desired firmness..
  • To deflate: pinch base of valve. This opens valve and allows air to escape..
  • For the perfect air pump, no batteries required, and excellent sanitary choice for inflating these, go with Amazon’s ASIN: B091NDVVP3.
Check Stock

Portable Scuba Tanks,2.3L Scuba Diving Gear,DOT Certified Tanks，Underwater 30-45 Minutes Diving Tank,Bacup Air Tanks

  • ★【2.3LDiving Tank Package】The D23-A incorporates improvements to the diving package, including bottle head first stage valves and pressure gauges, as well as pressure tubes,and added some configurations to enhance the diving experience.The total weight of D23-A diving package is 4.6kg. It can be carried directly for short distances, and can be transported in the car if traveling..
  • ★【Bottle top valve】: The main material of D23-A bottle top valve is brass chrome plating, using vacuum color plating process, to improve the anti-seawater corrosion performance, and more beautiful appearance. The bottle valve has a low pressure interface, which can be connected to BCD or life jacket for better applicability. The air inlet adopts high precision filter core, which can filter particles over 5 microns. The scuba tank is stamped with the DOT certification mark, you can always check..
  • ★【Pressure gauge and pressure tube】: D23-A scuba tank uses A more stable pressure tube, which is made of PVC and butadiol mixture material. It can bear A maximum pressure of 10MPa, and the internal pressure is only 0.8-1.2mpa in normal use. In order to make it easier to check the remaining air in the tank during the dive, we use an extended tube connection pressure g....
Check Stock

Taprite T742HP Primary Double Gauge CO2 Regulator, Brass

  • Low pressure gauge (the top gauge) indicates output pressure to the keg.
  • The low pressure regulator allows for an adjusted pressure from 1 to 50psi, the maximum downstream delivery pressure will not exceed 50psi.
  • High pressure gauge (the side gauge) indicates CO2 tank pressure remaining.
  • Duck bill check valve helps prevent product back up into the regulator.
Check Stock

EVIL ENERGY 1/2 Fuel Check Valve One Way Inline Non Return Diesel Gasoline Black 12mm OD,2PCS

  • Material: Made of aluminum alloy check valve,304 stainless steel spring,NBR rubber gasket and O-ring..
  • Size: 1/2inch (12mm) OD check valve can be work with 1/2 inch ID fuel hose..
  • Parameter: Min upstream pressure:0.2bar(2.9psi),working pressure range: 0.2-6bar (2.9-87psi),operating temperature range: -22℉ to 266℉..
  • Medium: Applicable to water, petrol, diesel, gas, oil, air, and other fluids.(Methanol is not recommended).
  • Application: The fuel line check valve is widely uesd in vacuum system,carburetors and low pressure fuel systems..
Check Stock