Best Axial Contact Bearing

NTN Bearing 30206 Tapered Roller Bearing Cone and Cup Set, Steel, 30 mm Bore, 62 mm OD, 17.25 mm Width

  • 30206 Bearing Size: Out Diameter:62mm/2.44 inch.
  • Ealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use.
  • Complete single tapered roller bearing assemblies are generally mounted in opposing pairs on a shaft to evenly distribute loads..
  • They incorporate logarithmic roller and raceway profiles with a optimized surface finish for ultimate roller to flange contact. These features result in reduced noise and smooth operation..
  • Widely used in transmissions, span styleoil or greased, high radial and axial load, trailer and caravan axles, gearboxes and differentials, span..
Check Stock

Mardatt 24 pcs 3 Type Thrust Needle Roller Bearings with Washers, AXK3552, AXK2035, AXK2542 Chromium Steel Rollers for Automobiles, Pump, Machine Tools

  • 【3 Size Thrust Needle Roller Bearing Assortment】You will get 9 pcs 20*35*2MM thrust needle roller bearings with washers, 9 pcs 25*42*2MM thrust needle roller bearings with washers, 6 pcs 35*52*2MMthrust needle roller bearings with washers, totally 24 pcs..
  • 【Premium Material】Made of chromium steel featured with a nice load carrying capacity and stiffness, high hardness, and high precision, smooth surface no residual burr that smooth to touch. Heat treatment process makes the bearing ball stronger, avoiding to deformed for a long time..
  • 【Feature】Needle Roller Thrust Bearings can accommodate axial loads in one direction only. Low noise and long service life, easy to maintain. Keep the bearing working environment clean and bearing lubricated in time..
  • 【Huge Function】Designed for low speed operation and axial loads only. Steel cage guides and evenly spaced rollers for reduced friction, vibration, and noise..
  • 【Wide Application】 Combined with 2 washers, make objects rotating smooth! Perfect for oven turntable, pump, rotating applications, motors, bikes, air conditioning, machine tools, automobiles, ect..
Check Stock

Dayton 2LY99 Air Circulator, 20 In

  • Dayton 4WT47 Axial Fan With 4YD87A Fan Cover, 115VAC 60/50Hz, 0.18/0.21A, 18/20W.
Check Stock

RBC JHA15XL0 Thin Section Ball Bearing, Sealed, 4-Point Contact X-Type, 1.5\ Bore x 1.875\ OD x 0.25\ Width

  • X-type 4-point contact ball bearing for use where space is limited and moment loads are high.
  • Deep-groove geometry for high speeds and supporting both radial and axial loads.
  • 52100 steel races and bearing balls for durability and resistance to deformity under heavy loads.
  • Conforms to ABEC 1F precision standard for performance within a narrow range of variation.
  • Rubber seals to retain lubricant and for protection against contaminants.
Check Stock

SKF 22207 E/C3 Spherical Roller Bearing

  • Shaker screen two row spherical roller bearing suitable for applications that support radial and oscillating axial loads.
  • Machined brass cage spaces the rollers for even load distribution and prevents contact to reduce friction, vibration, and noise.
  • P5 precision outer ring with center lubrication groove and oil holes.
  • C4 radial clearance is larger than CN and C3 for applications where impact loads and vibration are severe, both the inner and outer rings are tight fitted, or thermal expansion is a factor.
  • Straight bore fits conventional cylindrical shafts.
Check Stock

uxcell 3204-2RS Angular Contact Ball Bearing 20x47x20.6mm Sealed Bearings 5204-2RS

  • Low maintenance design for Problem free operation.
  • Angular bearing contact allows for outstanding durability while supporting both Radial and axial loads.
  • Available in wide variety of types, designs, sizes, and materials.
  • Quality you can Count on. SKF has been making ball bearings for over 100 years.
Check Stock

DNJ TW500 Thrust Washer For 85-01 Chevrolet, Suzuki, Geo, Metro, Swift, Samurai, Sidekick, Sprint,1.0L-1.3L, L4, L3, SOHC, DOHC, Naturally Aspirated, Turbocharged

  • Thrust washers limit axial movement and provide a bearing surface. Thrust bearings are designed to support axial load..
  • Thrust washers either have multiple tapered ramps and relatively small flat pads or have curved surfaces that follow a sine wave contour around their circumference..
  • Tear-drop or through grooves on the flange faces and wedge shaped ramps at each parting line allow engine oil to enter between the shaft and bearing surfaces..
  • Manufactured to meet or exceed OE specifications.
Check Stock

uxcell 7201AC Angular Contact Ball Bearing 12x32x10mm, Single Row, Open, 25° Contact Angle 5pcs

  • Axially asymmetric races with a 40 degree contact angle to support both axial and radial loads.
  • CN (normal) radial internal clearance for applications that do not involve thermal expansion or atypical precision.
  • Polyamide/nylon cage evenly spaces the rollers for even load distribution and prevents contact to reduce friction, vibrations, and noise.
  • Open bearing for lubrication in place and for use in applications with little exposure to dirt, grime, debris, and other contaminants.
Check Stock

5202-2RS - Double Row Angular Contact Ball Bearing 15 mm x 35 mm x 15.9 mm Double Lip Seal

  • Axially asymmetric races with a 40 degree contact angle to support both axial and radial loads.
  • CN (normal) radial internal clearance for applications that do not involve thermal expansion or atypical precision.
  • Polyamide/nylon cage evenly spaces the rollers for even load distribution and prevents contact to reduce friction, vibrations, and noise.
  • Open bearing for lubrication in place and for use in applications with little exposure to dirt, grime, debris, and other contaminants.
Check Stock