Best Awg Switch Socket

3 Prong Outdoor Extension Cord with Waterproof Switch 1875W Heavy Duty Extension Cord 14/3 SJT Extension Cable Inline On/Off Switch 15A 125V Grounded Outlets Plugs for Appliances (Black, 1.4 ft)

  • Waterproof Switch: the 1875W outdoor extension cord has a 16A LED waterproof switch with 14 AWG SJTW cable, and powerful 15A 125V NEMA 5-15P to NEMA 5-15R grounded outlets plugs, you can put it into use with confidence indoors or outdoors.
  • Long Serving Time: the extension cord with switch is mainly made of quality OFC, with good electrical conductivity and thermal conductivity, safe and stable, which is not easy to break for long term use.
  • Easy to Operate: the outdoor extension cord with switch is easy to operate by putting the plug into the socket, and you can plug in the appliance you want on the other male to female end, and control it through the matched switch.
  • Switch Supplement: the 3 prong extension cord with one key control switch is about 45 cm/ 1.5 ft in length, and can extend the use distance of various electrical appliances, which can help you say goodbye to unsafe plugging.
  • Wide Range of Use: you can use the switch of the extension cord to turn on or turn off your appliances, which is suitable for light strings, lamps, printers and many other standard electrical equipm....
Check Stock

weideer Extension Cord with Inline Switch On/Off IP67 Waterproof 20A 250V 14AWG 3Pin Outlets Plugs Power Cord Red Led Rocker Toggle Switch K-069-NW-R

  • The heavy duty cable is made of high-quality materials, with good electrical and thermal conductivity, safe and stable.The housing is made of flame retardant PA66 material. Has good flame retardancy and insulation..
  • The cable specification is 14AWG 35CM. Switching current and voltage: 20A125V/16A 250V/12V 30A. Type: DPST,ON/OFF..
  • This extension cord with waterproof switch is designed to give you extra reach.Simply insert the plug into the socket and use the switch in the middle of the cable to control your device..
  • Product application:Fits most appliances and electrical equipment. Such as desk lamps, fans, printers, LED lights..
  • Package Including:3 Prong extension cord with On/Off waterproof Switch.
Check Stock

Outdoor Extension Cord with Switch On/Off Waterproof Switch 3 Prong Extension Cord with Inline Cord Switch, Heavy Duty Extension Cord 125v/250v Black Sjtw Extension Cord(1.5 Ft, Black)

  • Outdoor Waterproof Switch: the outdoor extension cord with waterproof switch，3 prong extension cord with one key control switch is about 1.5 ft in length versatile cord..
  • UL Certified Outdoor Extension Cord: UL listed with a maximum electrical rating of 15A/125VAC/1875W/14 AWG, SJTW, safe and stable..
  • Durable Design: Reliable construction with flexible vinyl cord sheath and durable plug connector housing, extension cord with switch is strong enough to last a lifetime and pliable enough to easily fully extend..
  • Easy to Use: Plug and play design outdoor extension cord with switch is easy to operate by putting the plug into the socket, and you can plug in the appliance you want on the other male to female end, and control it through switch.Without the complicated installation of inline switch, you can replace old broken switch or add switch to the device..
  • Wide Range of Use: the 1.5ft extension cord with switch on/off for extending outdoor switch power when you need it most，which is suitable for holiday lights, Deck Lights, outdoor Christmas lights, edison bulb string lights, patio fountain, RV fans and many other electrical equipmentNote: The switch is waterproof, but the extension cord connection at both ends is not waterproof. It is recommended that ....
Check Stock

i-Socket Workshop Automated Vacuum Switch - Power Tool Activated Sensor and Automatic Shutoff - Workshop Safety Device - for Contractors and Woodworkers

  • Use high-quality materials: UL-certified US standard 3-pin AC power socket. UL-certified US standard 14AWG power cord. And the switch's shell is made....
  • Automatic turn on the vacuum when you start your tool , and delays 10 seconds to turn off the vacuum to clean the pipe when you complete your work.....
  • Package Included: ●1x vacuum switch with 15'' power cord ●1x Installation instruction.
  • Suitable for most medium duty workloads. Perfectly suited for medium-sized work loads such as most Miter Saws, Table Saws, Power Sanders and Routers,....
  • The total current of all electrical appliances used with this device must not exceed 15A when operating, and the electrical cutting tool can only be....
Check Stock

EAROND 50Amp Generator Power Inlet Box,3 Prong NEMA SS2-50P 125/250V 12500W Outdoor Generator Inlet Boxes for 50 amp Generator Cord, Weatherproof Electrical Receptacle Panel for Generator,ETL Listed

  • 【Product Manual】This generator power inlet box is compatible with all 50 Amp NEMA SS2-50P generator cord. 125/250V, 12500W generator transfer switch for outdoor, 4AWG-8AWG wire gauge, the best transfer switch kit partner for generator installation power lines..
  • 【Weatherproof and Anty-rust】This power inlet box is made of steel coated with anti-corrosion powder on the surface, which is weatherproof and resistant to bad weather. The socket is equipped with a flip cover, which can play a role in waterproof and dustproof..
  • 【Perfect Space Design】There are four 1.2-inch holes on the left, right, back and bottom of this power inlet box , which are convenient for wiring, it has ample space for wiring, which can accommodate thicker cables..
  • 【Green Light Indication】A green power indicator light is designed for this generator inlet box. When the generator cable is plugged in and the generator power is turned on, the green indicator light on the flip cover will light up, providing you with more safety and convenience..
  • 【Safety Assurance &Satisfaction Warranty】Earond generator power inlet box passed the certifications of ETL. Please read the instructions carefully before use. We provide 12-months warranty, feel free to contact us if you have any qu....
Check Stock

WYNNsky Oxygen Sensor Remover Set, Oxygen Sensor & Oil Pressure Sending Unit Master Sensor Socket Set, 7 Pieces O2 Sensor Socket Set

  • ... sensors fitted to the following vehicle Audi, BMW, Citroen, Mercedes, Peugeot, Renault, Skoda. These sockets feature cut-away sections allow some sockets to fit over wiring harnesses, complete with the black phosphate finish for a durable design..
  • 3/8’’ Drive × 7/8’’ ×1/2’’ Oxygen Sensor Socket/Vacuum Switch Socket removes and installs vacuum switch with a 7/8’’ hex and some oxygen sensors.
  • 3/8’’ Drive × 7/8’’ × 3-1/8‘’ oxygen sensor socket removes and installs oxygen sensors in domestic and many import vehicles. Slot in socket for wire clearance..
  • 1/2’’ Drive ×1-3/16’’ ×3-1/2’’ vacuum switch socket removes oil pressure sending units on late 80’s to mid 90’s GM models.
  • 1/2’’ Drive ×1-1/16’’ × 3-1/4’’ thermal sensor switch socket removes and installs thermal sensor switch on 1973-1977 CM vehicles.
  • 3/8’’ Drive ×1’’ and 1-1/16’’ ×3’’ remove oil pressure sending units. Deep design fits switches up to 2-5/8’’..
  • 1/2’’ drive ×7/8’’ ×2’’ heated oxygen sensor sockets slot in socket accommodates connectors on heated oxygen sensors.
  • 3/8’’ Drive × 7/8’’ ×1-1/4’’ low profile design for use in tight spaces..
  • This set includes 1-1/16 and 1 in. oil Pressure....
Check Stock

Phenolic (Bakelite) Threaded Medium Base E26 Fixture Socket with 10cm Wire, TWDRTDD US E26 Standard Lamp Holder (with Rotary Switch,Black)

  • UL&CSA listed Bakelite Medium E26 Light Socket with Rotary Control Switch..
  • Nice replacements for our ceiling fan/light fixture bad sockets,Perfect light sockets for many home projects.
  • Ideal for standard screw E26 light bulb bases( incandescent lamp, fluorescent lamp, LED bulb).
  • Rating :250V 250W, Wire spec :MIN, 600V 18AWG.
  • Material :Phenolic+Metal,Overall height :42mm.
Check Stock

2 Pack Outdoor Extension Cord with Waterproof Switch 3 Prong 14/3 Household Switchable Power Cord Heavy Duty 1875w Extension Cord with On Off Switch for Appliances Upgraded (6.5 Ft)

  • Strong Compatibility: the 1875W heavy duty extension cord is compatible with a 16A LED waterproof switch compatible with 14 AWG SJTW cable, and powerful 15A 125V NEMA 5-15P to NEMA 5-15R grounded outlets plugs, compatible with most appliances.
  • Quality Material Selection: mainly made of quality OFC material, our 3 prong extension cords are of good electrical and thermal conductivity, reliable and safe, strong enough against cracking and breakage, serving you for long.
  • Notable Size Details: the extension cord with inline switch measures about 200 cm/ 6.5 ft, a proper size for you to extending the distance between the electrical appliances and power supply.
  • Please note the size information before ordering.
  • Easy to Use: the appliance extension cord is easy for you to operate, and you can plug in the appliance you want, then putting the other end into the socket, and finally control it through the matched waterproof switch.
  • Versatile Performances: the outdoor extension cord with switch has a wide range of applications, suitable for lamps, fridges, light strings, televisions, printers, air conditioners, and many sorts of other electrical appliances.
Check Stock

Traovien SATA Cables, Dual PSU Power Supply 24-Pin Adapter Cable for ATX Motherboard 18AWG - 1FT

  • Allowing you to connect an additional PSU to your ATX motherboard.
  • Both PSU will be powered up by one single motherboard.Use a second PSU to power multiple graphics cards.
  • Compatible with 24 pin and 20+4 pin ATX motherboards (1x 24 pin(20+4) male port and 2x 24 pin female ports).
  • Designed for intense Gamining and BitCoin Mining.
  • Material: 18AWG . Length: main cable 12inches + secondary cable 12inches (30cm+30cm).
  • Dual PSU Power Supply 24-Pin Adapter Cable for ATX Motherboard sata cable 24 pin to 2420+4) pin sata cable JBingGG Dual PSU Power Supply 24 Pin (20+4) Adapter Cable for ATX Motherboard 12-inch ( 30cm ) (24 pin to 24(20+4) pin).
  • Note: Be sure to recognize the direction when inserting the cable!!! Dont insert the cable backwards or insert the wrong position to prevent the device from being burned!! When inserting the cable, hold the socket of the device before inserting the cable to avoid excessive force to insert the socket pin..
  • How to use: Plug the 24PIN of the main power supply into the female plug and plug the other end to the motherboard, and plug the secondary power supply into another 24PIN female plug to switch the power at the same time..
Check Stock