Best Automatic Die Cutting Machinery

uxcell 1/2-13 UNC Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel

  • ... torque, good toughness and wear-resistance for long service life..
  • Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
  • Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead....
Check Stock

uxcell M2.5 x 0.45 Metric Round Die, Machine Thread Left Hand Threading Die, Alloy Steel

  • ... steel, hardness, high torque, good toughness and wear-resistance..
  • Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
  • Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead....
Check Stock

uxcell 1/4-28 UNF Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel, 2pcs

  • ... torque, good toughness and wear-resistance for long service life..
  • Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
  • Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead....
Check Stock

40 Piece Tap and Die Set,SAE Inch Sizes, Essential Threading Tool with Complete Accessories and Storage Case, for Cutting External and Internal Threads, SAE Thread Types: NC, NF, NPT, by NAKAO

  • ➤ [Fit for]:SAE Tap and Die Set Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel, Metric Tap and Die Set, Ideal for rethreading fasteners and fastener holes for auto and machinery repair. Perfect set for the professional craftsman..
  • ➤[ Performance]: 40 Piece Tap and Die Set, All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance,Tapered coarse and fine taps and dies start threading more easily and smoothly, and prevent overthreading.Tap and die set,is designed to thread cutting: tap is used to process internal thread,while the die is for external thread..
  • ➤[Materia]: 40-Piece SAE tap and die set, Use Industrial grade GCr15 bearing steel construction, ensures durability and tool longevity, Can complete any work with confidence.SAE tap and die set Other Names: 40-Piece SAE tap and die set, SAE tap and die set 40 piece, 7559 Tap and Die Set, Essential Threading Tool, tap and die set SAE and standard, best choice 40 piece tap and die set, tap and die set SAE and standard craftsman.
  • ➤[Package include]: 17xTaps for Internal Threads.
Check Stock

BLUEROCK Tools PTM50-C Electric Motorized Pipe Threader Threading Machine fits RIDGID Dies

  • Threading machine pipe capacity: 1/2"-2"(DN15-DN50).
  • 3 FUNCTIONS -- This electric threading machine has a 3 in 1 function—threading, cutting, and trimming. The clamping die is stable and reliable, the feed depth of the die can be adjusted for more accurate control.
  • The cutting knife and trimming knife adopt alloy steel blade, which is fast, stable and efficient..
  • POWERFUL MOTOR -- This 220V Pipe Threader applies 1HP/750W motor, it has compact structure and strong power. The speed is 23RPM, more efficient and labor-saving..
  • AUTOMATIC TOOL RETRACTION -- This Power Pipe Cutting Threader adopts the inclined block automatic tool retraction design, without manual control, and can greatly improve the accuracy when machining the thread length..
  • SELF OILING -- This Tube Cutter has an oil filling system with an oil reservoir, which fills oil through the head and has a constant flow..
Check Stock

110 Piece Combination Tap and Die Set Alloy Steel 55°- 60° Metric Tools with Carrying Case + Free Glove Amazing Tour

  • 110 Piece Combination Tap and Die Set Alloy Steel Metric Tools with Carrying Case + Free Glove Amazing Tour.
  • Size:18 x 13 x 2.5"inch / 45 x33.5 x 6.5cm. Weight:14.3lb / 6.5kg. Material upgrading:Alloy Steel 55°- 60°, Sizes Stamped Engraved-etched On the Metal.
  • 35 Taper Taps + 35 Plug Taps + 35 Dies + 2 Tap Wrench M3-M12,M6-M20 + Die Wrench 25mm,38mm O/D + 1 T-Type Tap Wrench M3-M6 + 2 Antiskid Gloves.
  • Known for their ability to start easily, these taps and dies are the most commonly used style and are perfect for most hand threading applications.
  • Ideal for rethreading fasteners and fastener holes for auto and machinery repair. Perfect set for the professional craftsman Tap and die set is designed to thread cutting: tap is used to process internal thread, while the die is for external thread.
Check Stock

45 Pc Tap & Die Set Metric Mm Titanium Tungsten Steel Jumbo Thread Renew Tool

  • 86 Piece Tap and Die Set Bearing Steel Sae and Metric Tools, Titanium Coated with Metal Carrying Case.
  • Size:14.8 x 10.7 x 2.2"inch / 37.6 x 27 x 5.6cm. Weight:12lb / 5.4kg. Material upgrading:Alloy Steel 55¡ã- 60¡ã, Sizes Stamped Engraved-etched On the Metal.
  • SAE TAP SIZES and SAE DIE SIZES: 1/8"-27NPT, 4-40, 6-32, 8-32, 10-32, 10-24, 12-24, 1/4"-20, 1/4"-28, 5/16"-18, 5/16-24, 3/8"-16,3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18.
  • METRIC TAP SIZES and METRIC DIE SIZES: M3-0.5, M4-0.7, M5-0.8, M6-1.0, M7-1.0, M8-1.0, M8-1.25, M9-1.25, M10-1.5, M10-1.25, M11-1.5, M11-1.25, M12-1.75, M12-1.5, M14-2, M14-1.5, M16-2, M16-1.5.
  • Ideal for rethreading fasteners and fastener holes for auto and machinery repair. Perfect set for the professional craftsman Tap and die set is designed to thread cutting: tap is used to process internal thread, while the die is for external thread.
  • Easy Storage: Heavy-duty plastic blow-molded carrying case for easy transportation, safe storage, and quick organization.
Check Stock

SharCreatives 60 Piece Metric & SAE Threading Tap & Die Tool Set Coarse and Fine Threads for Threading and Re-threading with Accessories and Storage Case

  • ✔PROFESSIONAL HEAVY DUTY COMPREHENSIVE SET ideal for rethreading fasteners and fastener holes, cutting or renewal internal or external threads . Precision milled SAE and METRIC tap and die set for cutting raw material or repair existing threads, remove screws and more..
  • ✔SUPERIOR QUALITY made of hardened Alloy Steel suitable for lifelong durability, and superior strength. Suitable for cutting in steel, copper, aluminum, cast iron and etc.
  • ✔WIDE RANGE USE - Set includes complete and MOST POPULAR SIZES (20) Metric taps and dies: M3x0.5, M4x0.7, M5x0.8, M6x1.0, M7x1.0, M8x1.25, M9x1.25, M10x1.0, M10x1.5, M12x1.75.
  • (20) SAE Fractional taps and dies for coarse thread (UNC): 4-40 NC, 6-32 NC, 8-32 NC, 10-24 NC, 12- 24 NC, 1/4-20 NC, 5/16-18 NC, 3/8-16 NC, 7/16-14 NC, 1/2-13 NC.
  • (12) SAE Fractional taps and dies for fine thread (UNF): 10-32 NF, 1/4-28 NF, 5/16-24 NF, 3/8-24 NF, 7/16-20 NF, 1/2-20 NF.
  • ✔WELL ORGANIZED IN THE CARRYING CASE - Heavy-duty plastic carrying case for easy transportation, safe storage, and quick organization preventing from accessories to fall apart..
  • ✔ PROFESSIONAL AND PERSONAL USE this tap and die kit is ideal for DIY projects at home, auto and machinery workshop and many more..
Check Stock

Yakamoz 10pcs Micro Taps Bits Mini Machine Screw Drill Tap Set Metric Thread Screws Plug Bit Small Tapping Bits Tool

  • This tap and die set is made of made of high carbon chromium bearing steel which are more stronger, An overall chromium coating improves the corrosion resistance of the generally used through-hardening bearing steel..
  • 86 piece tungsten steel set comes in an organized, rugged plastic storage case.
  • Ideal for rethreading fasteners and fastener holes for auto and machinery repair. Perfect set for the professional craftsman.
  • Tap and die set is designed to thread cutting: tap is used to process internal thread, while the die is for external thread.
  • Known for their ability to start easily, these taps and dies are the most commonly used style and are perfect for most hand threading applications.
Check Stock