Best Automatic Bilge Pump For Boats

ECO-WORTHY 1100GPH 12V Marine Electric Bilge Pump for Boat Caravan RV Submersible Non-Automatic

  • Reliably provides bilge water pumping for larger recreational boats.
  • Meets automatic switch pump requirements for any vessels 20 feet and over with sleeping accommodations.
  • High capacity for larger boats and yachts.
  • Compact and durable package includes pump, wire seals, strainer, and mercury-free switch in one unit.
  • Installs quickly and easily in tight spaces, mounts horizontally only.
  • 12-volt, 1.5-amp draw pump is rated for 1100 GPH performance at open flow (at voltage of 13.6 volts DC).
  • Comes with a 29-inch length of 16-gauge caulked and tinned copper wire, and uses a 1-1/8”-inch interior diameter hose.
Check Stock

attwood 4505-7 Sahara S500 Automatic Bilge Pump 12-Volt 1.5-Amp Draw ¾-Inch Interior Diameter Hose 29-Inch 16-Gauge Wire

  • Reliably provides bilge water pumping for boats of any size.
  • Meets automatic switch pump requirements for any vessels 20 feet and over with sleeping accommodations.
  • Also convenient and useful for boats of any size.
  • Compact and durable package includes pump, wire seals, strainer, and mercury-free switch in one unit.
  • Installs quickly and easily in tight spaces, mounts horizontally only.
Check Stock

Johnson Pumps - 22102 PROLINE Bilge Pump 1000 GPH 2.5A

  • No one wants to worry that their boat is slowly taking on water because the bilge pump has failed. Well, you can sleep soundly with the reliable 2000 bilge pump on the job.Small size, high efficiency, low current (low cost switching power supply supporting).
  • to achieve a small size perfect combination of high flow..
  • It is non-automatic and must be paired with a float switch or sensor and ON/OFF/AUTO switch. Unique automatic "discharge" function can bear the long-term continuous operation under nearly congestion condition Impact resistant ABS housing.
  • Used in a boat,you can also use it in solar powered waterfall for your backyard, in a battery back-up sump system,etc. It empties the bilge roughly 25% faster than 1500gph bilge pump,and will continue to pump even when it encounters some minor debris.
  • Heavy duty motors with stainless steel shafts and tough. thermoplastic bodies submersible bilge pumps are tough enough for any bilge.Tough, efficient, long life motor.Offer high capacity output Water cooled long-life motors.
  • Ignition protection Water/moisture tight seals.
  • Snap lock strainer base for easy installation and removal.
Check Stock

LINGVUM Bilge Pump for Kayak Canoe and Boat - 17 Inch Manual Portable Kayak Hand Water Pumps with Reversible Hose Orange

  • CONVENIENT BILGE MANUAL WATER PUMP --- Our manual bilge pump length is 16.5", the maximum unfolded length is 25.5", equipped with a 23.2"long hose. At the same time, Our bilge pump has two water inlets and a long hose that attaches to either end, removing water quickly and reducing your fatigue.
  • MAKES WATER REMOVAL EASIER --- The maximum displacement is 0.4L each time. The premium rubber seal creates a watertight seal that won't come loose or leak allowing for the maximum amount of suction and discharge that performs better than other hand bilge pumps. Suction spacers can allow water to flow into the manual water pump at the fastest speed.
  • SCENE TO BE USED --- Perfect for emergency water removal in boats, kayaks, canoes or dinghies. With our kayak bilge pump, rest easy knowing that you’ll have a quick and easy way of removing water in those difficult times. Spending time on the water is supposed to be fun! Perfect boating and kayaking accessory.
  • LIGHTWEIGHT & PORTABLE --- This kayak hand pump is light (Only 0.78 pounds), easy to carry and store. Foam padded handgrip is non-slip and provides buoyanc....
Check Stock

Shoreline Marine Bilge Pump with Float Switch, 800 GPH

  • The pump securely clips into the mounting base for easy installation and for removal to clean and inspect the pump.
  • The self-contained automatic switch will detect water and automatically turn the pump on, when the water is gone shut the pump off.
  • The automatic bilge pump is completely submersible with a water pumping capacity of 800 GPH.
  • The ¾” O.D. outlet hose barb is designed to be used with standard ¾” I.D. bilge hose.
  • It’s ignition protected, uses a very low 5 amps operating current the wires are tinned marine grade.
Check Stock

attwood Sahara MK2 500 GPH 12-Volt Automatic Bilge Pump

  • 500 GPH, 12V, Fuse size: 3A, Outlet type: 3/4" & 1" barbs, Check valve: yes, Wire length: 29 1/2".
  • The easiest, most reliable automatic bilge pump ever designed.
  • The only automatic bilge pump that eliminates air-locks, Patented X-Air Impeller ejects trapped air in the pump and pipework.
  • Flexible Outlets: 90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation.
  • Single-Hand Pump Cartridge Release: Convenient when trying to access a pump located in a hard-to-reach area of the boat’s hull.
Check Stock

GOTOTOP Manual Bilge Pump 720GPH Plastic Handle Marine Manual Bilge Pump Hand Tools Water Transfer Diaphragm Hand Bilge Water Pump for Marine Boat Yacht

  • Flow Capacity: Delivers up to 12 gallons per minute (45 litres per minute) flow capacity. Lightweight and sturdy, its easy lever action allows fast pumping.
  • Convenient to Use: Strong and durable construction, specifically designed for marine applications. Easy to use and maintain, the diaphragm is quickly accessed for removing debris.
  • Suitable for: Ideal as a backup bilge pump in case your electronic bilge pump fails. Manual bilge pump for small to medium-sized boats.
  • Rubber Handle Grip: Fixed handle with rubber handle grip, easy and convenient to use. Compact design for all your water transfer needs..
  • Diaphragm Self Priming: This product is a 100% brand new compact manual self-priming pump..
Check Stock

Dontmiss Automatic Submersible Small Boat Bilge Pump 12v 1100gph Auto with Float Switch bilge pump for boat(Outlet Diameter：1 1/8\) (1100GPH)

  • LONG HOSE FOR EASY WATER REMOVAL: A 39" long hose lets you reach deep areas to discharge with ease. 1" intake nozzle, 14" chamber and 1.25" diameter hose to remove water quickly. 115 cubic inches per pump or 1 gallon removal in 2 to 3 pumps..
  • NO CLOG FILTER & WATERTIGHT GASKET: A rubber seal creates a watertight seal that won't leak allowing for maximum suction with the manual water pump. Features a filtered nozzle to prevent seaweed, leaves and debris from clogging the hand siphon pump..
  • LIGHTWEIGHT, PORTABLE & IDEAL FOR EMERGENCIES: The hand pump is light and easy tostore, making it perfect for emergency use in small boats, kayaks, canoes or dinghy. Does not require power making it ideal as an emergency bailer or in kayaking..
  • EXCEPTIONAL QUALITY: Our marine-grade bilge pump is specially designed to quickly remove water from hard to reach places season after season. We use premium materials not found in other lesser quality boat, RV, car and home products..
  • WHY BETTER BOAT: We are a family owned American business committed to making premium quality interior & exterior RV care and boat cleaning supplies. We stand behind your satisfaction and our hand water pump or hand held bilge pumps for boats..
Check Stock

Boat Bilge Water Pump 12 V 1100 GPH Electric Marine Bilge Pump and Automatic Boat Bilge Pump Float Switch 12 V 24 V 32 V for Boats, 2 Pieces in Total

  • Strong and Long-life Motor - The high quality bilge pump's motor will do a good help when you drain the water. This 1100 GPH electric bilge pump would improve work efficiency and could be used for a long term..
  • Waterproof Material and Safety Assurance - The casing of the pump is made of ABS, which is durable and waterproof. All wire ends and terminals with heavy duty marine sealant and located above the highest possible water level by fastening with insulated staples or plastic straps..
  • Wide Application - Our electric bilge pump can be used in aquarium, fishing boats, fountain, runabouts and other places to easily drain the water.
  • Quick to Install - With the compact size and universal mounting hole positions, it is easy and quick to finish the installation..
  • Easy to Clean - The pump comes with a clear instruction, it can be easily for you to operate. Follow the instructions carefully and your pump will provide you with the maximum output and the life for which it war designed..
Check Stock