Best Automatic Air Cooling Machine

STC-1000 Digital Temperature Controller Digital LED Display DC 110V-220V 10A Celsius Heating Cooling Centigrade Thermostat Sensor 2 Relay Output with NTC 10K Thermistor Sensors Temperature Probe

  • STC-1000 Digital Thermostat temperature control range: -50-99°C, celsius display. Easy operation, to set start temperature, stop temperature, corrected temperature correction, delay start..
  • Dual heating and cooling function : Heating ( start temperature is less than stop temperature).
  • Cooling ( start temperature is above than stop temperature). Refrigerating contro, output delay protection..
  • The NTC probe is waterproof and allows to control the temperature even of fluids, allowing the controlled heated or cooling..
  • Wide Application : Suitable for all kinds of seafood machine ,HVAC compressors, freezer , fridge , air conditioner, fermentation chamber , chest freezer ,water chiller and other equipments which need automatic switching between refrigerating and heating..
  • Working Mode: Heater, when temperature is lower than the set temp, the controller will automatic turn on and turn off when higher than the set temperature. Cooler appliance, the temperature turn on when the temperature is higher than set temp, and turn off when the temperature is lower than set..
Check Stock

FLARING Plasma Cutter Equipment 50 AMP 220V IGBT 1/2'' Clean Cut CUT50 Max 3/5‘’ Cut High Frequency Inverter Plasma Cutting Machine for Car Frame,Carbon Steel,Stainless Steel,Thin Copper,Aluminum

  • [Cutting Ability] This plasma cutter machine automatic 220v(50/60hz),10-50A dc output, 1/2″(12mm) ideal clean cut and 3/5″(15mm) maximum severance cut under 220v,70% duty cycle. The upgraded model only supports 220v voltage input..
  • [Cutting Material] Compact plasma cutter has a handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper,cast iron,chrome and aluminum(Aluminum≤1/4″,Copper≤1/5″).
  • [Breaker Recommendation] We suggest a 30A breaker on 220V while using this plasma cutter.Air Pressure 60-70PSI suggested.Btw,this CUT50 plasma cutting machine works well with a generator above 5000W..
  • [Fan-Runs-on-Demand cooling system]The new machine uses powerful cooling system, “dormant” fan,only operates when needed. This cuts down on fan noise, along with reducing power consumption and contaminants drawn into the machine..
  • [Warranty Assurance] We are a manufactory with over 10 years’ experience of professionals producing the plasma cutter machines,3 year’s warranty.Please add to cart and take it without hesitation.
Check Stock

TOSOT 8,000 BTU(ASHRAE) 5,000 BTU (DOE) Portable Air Conditioner Quiet, Remote Control, Built-in Dehumidifier, Fan, Easy Window Installation Kit - Cool Rooms Up to 300 Square Feet

  • ❆【10000 BTU COOLING POWER】: The ASHRAE rating 10000 BTU (6600 BTU 2017 SACC standard) compact air conditioner (27.3x13.65x13.57inch) that fits in any corner provides steady, fast, effective cooling for rooms up to 400 sq. ft..With the horizontal window opening and automatic vertical swing design, it will be great for even air distribution throughout the room.Sleep mode makes it extra quiet while you rest. It’s perfect for dorms, apartments, cabins, campers, offices, bedrooms, or living rooms..
  • ❆【EFFORTLESS OPERATION】：Enjoy the simplicity and comfort of digital controls. The portable AC features an easy-to-read LED display and includes a compact remote control (batteries not included) to easily set the time, temperature, and mode, from across the room. Its 24-hour adjustable timer can cool a room to a temperature between 60°F-90°F and has 3 modes to choose from - cooling, dehumidification, fan only. It features rolling wheels and the invisible handle allow free moves between rooms..
  • ❆【3-in-1 FUNCTIONALITY】: This air cooler combines 3 energy efficient functions for all of your cooling & ventilation needs with cool, fan, & dehumidifying modes all in one machine. you don’t only get the cooling effect of the portable AC but it also....
Check Stock

Crain Hook Handle Utility Knife 189

  • 120V 1600W Intelligent automatic cooling system floor heat gun, save the energy and extend the life of heating elements.
  • DON'T adjust the temperature knob to "0" after working, directly turn off switch, delay 5 minutes shutdown for cooling down of hot air gun.
  • Comfortable narrow handle with detachable air filter design, high-performance heating power and strong air output.
  • Professional PVC vinyl flooring welding gun includes all flooring accessories as picture.
  • Adjustable hot air from 68°F-1300°F / 20℃ to 700℃, hot air welding gun with USA plug.
Check Stock

Huanyu Oilless Diaphragm Vacuum Pump Oil Free Anticorrosive Pump 30L/min Lab R&D for Filtration Extraction Apsorption 110V(Anticorrosive Type, GM-0.5A(Single Pump))

  • ...duction process adopts new technologies and materials, adopts a pressure-adjustable design, so that the work is smooth, which can meet the vacuum degree and gas flow rate within a certain range. 2. Our special motor has passed the CE certification, and is equipped with an overheating power-off protector, which will automatically cut off the power after the pump body temperature reaches 266℉ to protect the motor from damage during long-term operation..
  • [Durable] 1. Friction-free film-the use of frictionless film movement, no heat, no friction loss. And the diaphragm is made of imported rubber, which is corrosion resistant and has a long service life. 2. Automatic cooling--the machine body is equipped with an automatic cooling exhaust system, which can ensure continuous operation for 24 hours..
  • [Worry-free after-sales service] Our vacuum pumps are small in size, light in weight, easy to move, save laboratory space, and are convenient for repair and maintenance. At the same time, we also provide a one-year quality warranty service and life-long professional after-sales service, so that you can shop without worries!.
Check Stock

Uthfy Portable Air Conditioner, Evaporative Air Cooler with 3 Speeds, 1789 CFM Swamp Cooler with 110°Oscillation,Remote Control, 12H Timer, 5.3 Gallon Tank,Cooling Fan for Bedroom Home Office

  • ❄️【Customize Your Modes】 Normal mode, which provides a steady airflow. "Natural Wind" mode, which constantly changes between different wind strengths, .Sleep mode, soft wind, enjoy a quiet sleeping environment.widespread oscillation from side to side automatic and up and down manual makes it better for air flow.There are also 1-12 hours timer and remote control function makes it very convenient.
  • ❄️【5.3 Gallon Water Tank】The 5.3 gallons water tank can run continuously for 8-10 hours outputting cool air,keeping your hot, dry air cool and moist overnight. The cooling pad, and rear grille make regular cleaning and maintenance a breeze.
  • ❄️【Ideal for Hot Dry Areas 】This cooling fan can fits in different occasions like living rooms, bedrooms, kitchens and offices.With a 31" tall and 15" width dimensions,it blows a very wide range of 110 °, and also very far.Its built-in handle on the back allows you to move your tower air conditioner from room to room effortless.
Check Stock

Uthfy Evaporative Air Cooler, 30″ Tower Fan that Blow Cold Air with Remote Control, 3 Speeds, 12H Timer, Oscillating Bladeless Cooling Fans for Bedroom Home Office

  • ....Also used with two ice boxes for even better cooling..
  • 【3 Modes & 3 Speeds 】❄️ Normal mode, which provides a steady airflow. “Natural Wind” mode, which constantly changes between different wind strengths, .Sleep mode, soft wind, enjoy a quiet sleeping environment.widespread oscillation from side to side automatic and up and down manual makes it better for air flow.There are also 1-12 hours timer and remote control function makes it very convenient..
  • 【0.8 Gallon Water Tank】❄️The 0.8 gallons water tank can run continuously for 6-10 hours outputting cool air,keeping your hot, dry air cool and moist overnight. (runing time is dependent on ambient humidity).The removable water tank, cooling pad, and rear grille make regular cleaning and maintenance a breeze..
  • 【Ideal for Hot Dry Areas 】❄️This cooling fan can fits in different occasions like living rooms, bedrooms, kitchens and offices.With a 30″ tall and a stable 8.6″ x 10.9″ base can fit into the limited space where pedestal or box fans do not fit, like small size garret.Its built-in handle on the back allows you to move your tower air conditioner from room to room effortless..
Check Stock

Digital Temperature Controller STC-1000 Digital LED Display DC 24V 10A Celsius Heating Cooling Centigrade Thermostat Sensor 2 Relay Output with NTC 10K Thermistor Sensors Temperature Probe

  • STC-1000 Digital Thermostat temperature control range: -50-99°C, celsius display. Easy operation, to set start temperature, stop temperature,....
  • Dual heating and cooling function : Heating ( start temperature is less than stop temperature).
  • Cooling ( start temperature is above than stop....
  • The NTC probe is waterproof and allows to control the temperature even of fluids, allowing the controlled heated or cooling..
  • Wide Application : Suitable for all kinds of seafood machine ,HVAC compressors, freezer , fridge , air conditioner, fermentation chamber , chest....
  • Working Mode: Heater, when temperature is lower than the set temp, the controller will automatic turn on and turn off when higher than the set....
Check Stock

Thermalright TL-C9B 92mm Case Fan PWM Control 2000RPM Balance Performance Case Fan

  • Air volume: 49CFM (MAX), Wind pressure: 1.53mm H2O (MAX), Speed: 2500RPM±10%, higher air flow to enhance cooling performance.
  • Noise level ≤29.3DBA, Ultra silent operation.
  • Designed for projects that requires cooling or ventilation.
  • or as a replacement fan for various products.
  • 4-pin PWM version with excellent balance of performance and quietness, supports automatic motherboard speed control.
  • The case fan Square frame with excellent airflow and pressure performance: ideal for use on air cooling radiators.
Check Stock