Best Auto Voltage Regulator

10000W SCR Digital Voltage Regulator,AC 220V 80A Electrical Motor Speed Controller Regulator, High Power Voltage Regulator Dimming Thermostat

  • 10000W resistance load limit power, room temperature for a long time is recommended to be used within 5000W, voltage regulation: AC 10V to 230V (adjust begin 20V), this is an easy-to-use voltage regulator that can control the brightness or speed of the light. Use a new bidirectional high-performance thyristor. The current can reach up to 100 A, and solves the problem of overcurrent caused by small resistance when the induction cooker cable is cooled..
  • 10000W SCR voltage regulator standard aluminum housing safe and durable super power electronic voltage regulator. It is widely used in resistive loads, such as heating wires, incandescent lamps and most (not all) single-phase AC motors..
  • 10000W speed controller operating voltage AC 110V-230V. Maximum power 10000W (resistive load), long term operating power 7000W. Voltage adjustable from AC 0V to near input voltage. Full copper 75A super large current terminal. The trigger circuit is unique, the control voltage is accurate and there is no hysteresis, the resistive load is turned off to 0, and after starting, it will be adjusted from 10V, adjust to the supply voltage that is closest to the input..
  • Connect the SCR voltage regulator to the front of the circuit of the electrical appliance. The ''input' and """"....
Check Stock

MILLER ELECTRIC MIG Welder,120/240VAC,1 Phase

  • Price For: Each Series: Millermatic 211 Aluminum - Material Thickness: 18 ga. to 3/8" Mild Steel - Material Thickness: 24 ga. to 3/8" Stainless Steel - Material Thickness: 20 ga. to 1/4" Hz: 60 Input Amps: 17.
  • Millermatic 211 MIG Welder with Advanced Auto-Set - 907614.
  • Includes: 10 ft. M-10 MIG Gun, 10 ft. Work Cable with Clamp, Built-In Gas Solenoid Valve, Dual Gauge Regulator with Gas Hose, Sample Spool of 0.030 in. Solid Wire, (2) 0.030 in. Contact Tips, (2) Hook-and-Loop Cord Wraps, Material Thickness Gauge Overall Width: 20-1/2 inch Standards: CSA Certified Overall Height: 12-1/2 inch.
  • Features: Advanced Auto-SetTM, Auto Spoolgun Detect, Smooth-StartTM, Angled Cast-Aluminum Drive System, Quick SelectTM Drive Roll, Thermal Overload Protection, Fan-on-Demand Phase: 1 Input Voltage: 240VAC Welded Material: Aluminum, Steel Output Range: 30 to 230A DC Welding Processes: MIG/Flux Core Portability: Handheld Portable Application: Maintenance, Repair, Auto/Cycle Shops, Farm and Ranch Jobs, Hobby Welding.
Check Stock

20 Pieces 3 Pins AMS1117-3.3 DC 4.75V-12V to 3.3V Voltage Regulator Down Power Supply Buck 800mA Module

  • ... to install: please check the product pictures carefully for the wiring diagram steps before using, simple dual-panel design and the input output using the 3 pin single row pin for easy connection, the input voltage is higher than output voltage 1.2V, the module will work normally.
  • AMS1117-3.3 is a positive voltage regulator step down power supply module, support DC 4.75-12V input and 3.3V fixed voltage and 0.8A current output.
  • Electronic devices partner: the 3 pins AMS1117-3.3 voltage regulator mini step down power supply module, can be applied to electronic devices which need 3.3V power supply, such as SCM project design, MCU development and more, easy to be connected and provide the power supply.
  • Where to use: the voltage to 3.3V 800mA DC buck module is applicable for high-efficiency linear regulator published active power regulator battery charger active instrument.
  • Compatible with: the 3 pins AMS1117-3.3 voltage regulator mini power supply is compatible with Arduino MEGA2560, MSP430 development board, 3.3V low power consumption MCU, FPGA/CPLD PLD programmable logic systems, ARM7 ARM9 ARM11 STM32, etc..
  • Provide more safety: the AMS1117-3.3 800mA DC buck module features overheat shutdown circuit provides overload and over-temperature protection, ....
Check Stock

uxcell Power Converter Regulator DC 48V/60V to DC 5V 10A 50W Waterproof Voltage Convert Transformer

  • Waterproof IP68 Voltage Converter Regulator DC 48V/60V(10V-60V DC) to DC 5V 10A 50W..
  • Protections: Over-load, Over-current, Over-temperature, Short-circuit, Over-voltage..
  • Auto-recovery when device is back to normal operating.
  • Die-cast aluminum shell, anti-shock, and moisture-proof and has stronger durability.New and Old label is being changed, but the products are same..
  • Note: It is recommended to use stable DC power for the input power supply If you use the pulsed DC power provided by the generator, please filter it with capacitor before connecting it to the converter. If you use solar panel to supply directly, please note that the open circuit voltage of the solar panel cannot exceed the maximum withstand voltage of the converter. The supply voltage should be within the rated voltage and always leave a certain margin..
Check Stock

CKT3800-400 Touch Screen Dry Block Temperature Calibrator, Dry Type Temperature Calibration Furnace Temperature Range 50℃~400℃

  • Note: This product series's input supply voltage is 220V, currently it does not support 110V input voltage, if end user's country use 110V input voltage, need to buy the 110-220V converter or regulator, buyers can buy the converter from us or buy a regulator locally. For 220V input voltage country, no need to buy the converter/regulator..
Check Stock

Voltage Regulator Rectifier For John Deere 355D GT242 GT262 GT275 Lawn Tractors

  • ★100% Brand new high performance Voltage Rectifier Regulatorand All parts are tested and quality controlled prior to shipment.
  • ★Replacement Part Numbers: M70121,M97348,21066-2056, 21066-2070,SH578-12, SH626-12.
  • ★This Voltage Rectifier Regulator is made up of high quality aluminum , highest grade lamination materials,higher grade of electronic components.This rectifier has overheat protection , help to dissipate excess voltage,prevent over-charging battery , improved heat sink and charging capabilities.
  • ★This Voltage Rectifier Regulator is made up of high quality aluminum , highest grade lamination materials,higher grade of electronic components..
  • ★Package including: 1 X Voltage Rectifier Regulator as images display.
Check Stock

CKT3800-150B Touch Screen Dry Block Temperature Calibrator, Dry Type Temperature Calibration Furnace Temperature Range -30℃~150℃

  • Note: This product series's input supply voltage is 220V, currently it does not support 110V input voltage, if end user's country use 110V input voltage, need to buy the 110-220V converter or regulator, buyers can buy the converter from us or buy a regulator locally. For 220V input voltage country, no need to buy the converter/regulator..
Check Stock

CKT3800-150A Touch Screen Dry Well Block Temperature Calibrator, Dry Type Temperature Calibration Furnace Temperature Range -20℃~150℃

  • Note: This product series's input supply voltage is 220V, currently it does not support 110V input voltage, if end user's country use 110V input voltage, need to buy the 110-220V converter or regulator, buyers can buy the converter from us or buy a regulator locally. For 220V input voltage country, no need to buy the converter/regulator..
Check Stock

uxcell Voltage Converter Regulator DC/DC DC 12V Step-Up to DC 48V 2A 96W Power Boost Transformer Waterproof

  • Waterproof IP68 Voltage Converter Regulator DC 12V to DC 48V 2A 96W..
  • Protections: Over-load, Over-current, Over-temperature, Short-circuit, Over-voltage..
  • Auto-recovery when device is back to normal operating.
  • Die-cast aluminum shell, anti-shock, and moisture-proof and has stronger durability.Widely used in bus, cmb, large trucks, motor, solar generate electricity, display screen of bus and taxi, car audio device.
  • Note: It is recommended to use stable DC power for the input power supply If you use the pulsed DC power provided by the generator, please filter it with capacitor before connecting it to the converter. If you use solar panel to supply directly, please note that the open circuit voltage of the solar panel cannot exceed the maximum withstand voltage of the converter. The supply voltage should be within the rated voltage and always leave a certain margin..
Check Stock