Best Auto Hub Bearing

Apeixoto 513296 Front Wheel Bearing Replacement for Nissan Quest Pathfinder Maxima Murano Infiniti QX60 JX35 with 5 Lug Front Right and Left 2PCS Wheel Hub Assembly

  • Fitments: This front wheel bearing hub assembly is compatible with 2009 - 2017 Maxima (All Models), 2011 - 2017 Quest (All Models), 2009 - 2017 Murano (All Models), 2013 - 2017 Pathfinder (All Models 2014 3.5L Engine ONLY), 2013 Infiniti JX35 (All Models), 2014 - 2017 Infiniti QX60 (All Models). You can double check the fitment in the production below or the fitment bar above..
  • OE Replacement: The Apeixoto front wheel bearing hub assembly is a direct OE replacement. The replacement oe part # is 513296, HA590252, BR930745.
  • Premium Quality: The Apeixoto wheel bearing is constructed with 65 Manganese Steel which is much stronger than normal 55 and 45 steel. And 65 manganese steel can endure much more high temperature.All our production line is equipped with the US and South Korean apparatus which are more precise..
  • Quality Control: We offer 2 year warranty for Apeixoto wheel hub assembly. Every piece of Apeixoto wheel hub bearing will be tested many times before entering the markets. All of our workers and engineers have over 10 years working experience. Every wheel hub bearing will be tested every 1 hour during production and will be tested again after production to block down all unqualified products..
  • Easy Installation: There are two front wheel bearing ....
Check Stock

ABN Air Compressor Clutch Rebuild Removal Tool Kit AC Clutch Puller for Car Auto Air Conditioning on GM, Ford, Chrysler

  • ...including GM, Ford, Chrysler, imports, and other makes and models.
  • Check vehicle owner’s manual for a list of compatible compressors.
  • EASY TO USE: Keep all threads clean and well-oiled.
  • Outer part of tool has smooth side and threaded side (threads used to attach to inner clutch shaft when removing).
  • Start with one bearing between tool and clutch, and thread down fully onto compressor's inner shaft threads (This is the fixed part - inner bolt does not move when threading down outer piece).
  • Remove tool and stack other bearing on to take up the distance the clutch pushed into pulley.
  • BUILT TO LAST: Constructed from stainless steel with a black coated finish for ultimate strength and longevity.
  • Resists rust and corrosion with proper care and lubrication.
  • 2 and 3 hold puller plate allows mechanical force to do all of the pulling on most clutches.
  • EASY STORAGE: Heavy-duty 10.5” x 8.25” x 2.25” inch (26.7cm x 21cm x 5.7cm) plastic blow-molded carrying case with handle for easy transport, safe storage, and quick organization.
  • CONTENTS: Complete with puller body, jaw and sleeve assembly, jack-screw, thrust washer, button, bearing, and puller plates.
  • includes (1) 3-eye round clutch plate sander arbor, (3) 1/4-inch – 20 Hex screws, (2) 3/8-inch – 16 Hex....
Check Stock

Bearing Buddy Chrome Bearing Protectors with Auto Check With Bras - Pair - 1.980" Diameter

  • MODEL: Bearing Buddy 1980A (Chrome Version) / Protective Bra 19-B.
  • SIZING: 1.980 inch (inside diameter of hub) See secondary photograph for measuring instructions..
  • CONTENTS: One Pair of 1980A Chrome Bearing Buddy(s) with auto check feature & Matching Protective Bra(s).
  • MATERIAL: Chrome Plated Steel Exterior Shell with Stainless Steel internal parts.
Check Stock

Detroit Axle - 5-Lug Front Wheel Hub Bearing Assemblies Replacement for Sebring Cirrus 200 Dodge Avenger - 2pc Set

  • Fits: Specific Models - Check Fitment Chart and Product Description for Accurate Information.
  • Kit Includes: (2) Front Wheel Hub Bearing Assembly.
  • Hub Specifications: Position: Front Left and Right| Lugs: 5 Bolt| ABS Type: Encoder| Flange Type: 4-Bolt Square.
  • Undergo impact, wear, and fatigue testing to help ensure quality and durability.
  • 10-Year Warranty. Detroit Axle Is A Leading Supplier Of Hub Bearing Assembly, Wheel Bearing, Assembly Model. The Part In This Kit Are Direct Compatible With Chrysler 200 Sebring Front Wheel Bearing, Dodge Avenger Hub Assembly And Front Wheel Bearing, Wheel Bearing Assembly.
Check Stock

OEM TOOLS 27213 Master Wheel Hub & Bearing Remover & Installer Kit Back & Front Wheel Bearing Puller Kit Back & Front Wheel Hub Puller Easy to Use

  • NO SHOP PRESS NEEDED: Remove the need for a shop press with our wheel hub bearing press tool.
  • Save time removing even seized-up wheel hub and bearing....
  • FOR PRO AND DIY MECHANICS: This wheel bearing puller/installer is one of the only tools for servicing front and rear wheel hubs and bearing on German....
  • TIME-SAVING BEARING TOOL: No need to remove the strut assembly or knuckle to remove/install the hub and bearing.
  • VARIETY OF ADAPTERS: Service your vehicles easily with our rear and front wheel bearing removal kit.
  • This wheel bearing removal tool features all the....
  • DURABLE STEEL CONSTRUCTION: Our rear and front wheel drive bearing adapter kit's steel design holds up to the torque required to remove hubs and....
Check Stock

27213 Master Wheel Hub and Bearing Remover and Installer Tool Kit, Back and Front Wheel Bearing Puller Kit, Back and Front Wheel Hub Puller

  • 【WIDE COMPATINILITY 】-- Universal, provides various size of adapters makes installing wheel hubs and bearings on most domestics and foreign cars-rear, front, and four-wheel drive much easier. Compatible with BMW/Benz/Porsche/VW and most domestic/Asian/European vehicles. Works on Front, Rear and All-Wheel Drive Vehicles..
  • 【UPGRADE DESIGN】-- Designed with slide-hammer-free removal, make the job much simple that can easily install the hub and bearing changes on most cars. Under without the use of a hammer or a shop press, only use this tool be able to easily remove and install wheel hub and bearing assemblies as well as inner bearings. Whether it is a professional or DIY mechanic, can be easily, accurately and safely completed the disassembly and installation of the wheel hub and bearing on the vehicle..
  • 【SUPERIOR MATERIAL】-- Made of solid carbon steel with resisting impact and no deformation, surface black anodized anti-rust finish to anti-rust and anti-corrosion for years of trouble-free use. Mold-blown plastic case is convenience to carry and storage. Alternative to OEM 27213, quality and function meet to OEM. High precision and hardness, designed with o....
Check Stock

LAFORMO Boat Trailer Hub with Bearing Kit - Set of 2 Trailer Idler Hub Kits 5 on 4.5 for 3500 lbs Axle…

  • Set of 2 New trailer idler hub kits 5 on 4.5 for 3,500 lbs trailer axle.
  • Bearing Kit Specifications:Outer bearing # 44649-- 1 1/16"/Inner bearing # 68149-- 1 3/8"/Seal inside diameter 1.719"/Seal outer diameter 1.983".
  • Package Includes:2 x Hub / 2 x Inner bearing / 2 x Outer bearing / 2 x Seal.
  • Feature:The surface of the hub is galvanized..
  • These Hub are very suitable for ship trailers to withstand the harsh seawater environment..
Check Stock

ATPEAM 9-Way Slide Hammer Puller Set | Wrench Adapter Axle Bearing Hub Auto Set, Axle Front Rear Wheel Bearing Dent Hub Gear Puller Remover Set

  • Extra Durable: The ATPEAM slide hammer puller set is made of drop forged steel pullers and fully hardened shaft and accessories, this will pull the hardest wheel bearing and wheel hub out of the tight position, and make sure this tool set a longer lifespan..
  • A Complete Puller Set: 1x shank and T-bar assembly, 1x 4.8 lb. sliding hammer weight, 1x cross nut, 2x hub grappler adapter flanges, 1x large forcing screw, 1x cone, 1x 3-way puller head, 1x vise grip adapter with double lead thread, 1x seal hook adapter, 1x dent puller retainer, 1x self-tapping screw, 3x 5 inch (127 mm) internal and external jaw bars, 3x hex jaw nuts, 3x hex head cap screws, and 1x blow molded storage case..
  • Auto Body Repair Tool Set: The slide hammer bearing puller kits are body shop tools that are used to aggressively remove tightly jammed parts or dents.
  • slide hammers consist of a long metal shaft with an attachment point at one end, a heavyweight that slides along the shaft, and a handle with a stop on the opposite end.
  • this hammer tool slide kit includes 2 jaws and 3 jaw internal and external pullers, rear axle bearing puller tool, locking plier adaptor, puller hook, and auto dent puller tool.
  • Wide Application: The 9-way slide hammer puller set with 4.8 lb slide hammer is idea....
Check Stock

Detroit Axle - Front Wheel Bearing & Hub Assembly Replacement for 2006-2010 Ford Explorer Mercury Mountaineer

  • Replacement for 2006-2010 Ford Explorer - [2007-2010 Explorer Sport-trac] - 2006-2010 Mercury Mountaineer.
  • Kit Includes: 1x Front Wheel Hub and Bearing Assembly.
  • Hub Specification: Position: Front Left or Right | Lugs: 5 | Flange Type: 3-Bolt Triangular | ABS Type: Sensor Wire.
  • Detroit Axle Suspension Components are Ready to Meet the Rigorous Demands of Today's Foreign and Domestic Passenger Cars, Trucks and SUVs.
  • 10-Year Warranty. Detroit Axle Is a Leading Global Retailer and Distributor of OE Re-manufactured and New Aftermarket Auto Parts.
Check Stock