Best Atx Switching Power

24/20-Pin ATX DC Power Supply Diagnostic/Breakout Board Module

24-pins Standard ATX Connector, support 20 / 20+4 / 24 pins wire header. With latching button switch to control ATX power supply output ON/OFF..
Total 16 LEDs, it is convenient for you to diagnose the functions of all pins except COM/GND, therefore, if the output of any one wire of your ATX power supply is faulty, it can be seen at a glance..
High quality screw terminal blocks. Each terminal position support current output maximum 10 Amp. Pitch 5.0mm/0.197 inch, Wire range 26AWG to 12AWG / 2.5mm square..
Packing list: 1x Diagnostic breakout board, 4x Screws, 4x Nylon spacers..
Special Note: The PS_ON LED lights up when the output is OFF and goes out when the output is ON, this is just the opposite of the indication status of other LEDs. Since many new ATX power supplies no longer provide output -5V, the NC/-V LED will not light up when connected to this type ATX power supply..

Allied 300W 20+4-pin ATX PSU w/SATA General Features: 300 watts 115V, 230V switchable power supply.
60/50Hz power draw One (1) 12-inch 20+4-pin ATX power connector.
One (1) 12-inch 4-pin 12V ATX power connector Four (4) large Molex 4-pin power connectors.
One (1) floppy drive power connector One (1) Serial ATA power connector Power Specifications:.

【CPU Power Cable】EPS 12V CPU 8 Pin Female to CPU 8 Pin and ATX 4 Pin Male Power Supply Extension Cable for Motherboard..
【Easy to Install】EPS 12V CPU 8 Pin Female end to plug into 8 pin male to 8 pin male cable of power supply, CPU 8 pin and ATX 4 pin male ends to plug into the motherboard..
【Compatibility】Compatible with all PSUs - ATX, SFX, Fanless PSU. Compatible with motherboard that has 8-pin +12V socket, 4-pin +12V socket or 8-pin +12V socket and 4-pin +12V socket. It is availble to use the single CPU 8pin, single ATX 4 pin or both of CPU 8 pin + ATX 4 pin..
【Specification】Length: 9.5 inch/24cm, Gauge: 1007-18AWG(standard tin-coating copper wire), Quantity: 1pcs..
【Note】This cable is a common power supply Y-splitter extension cable, not converted cable. It supports all of power supplies with CPU 8 pin male port output. It needs to be connected to CPU 8 pin Male to Male Power Cable of PSU. Please use it correctly..

Made of aviation magnesium aluminum alloy with sufficient thickness of 8mm (real thickness) by NC finishing,the surface is sandblasted and hard anodized, beautiful and generous.Size:282*282*120mm.
Support multi platform MATX ITX motherboard.Support 4 hard disk installation..
Supporting integrated water-cooled installation (120 140 240 280 360 water-cooled drainage).
durable, suitable for long-term high-strength disassembly.
1 x Stainless steel switching power supply wire.
1 x water cooling support and 4 x foot pads.

Note：input power 11.4V-12.6V,don't too low or highg,or will be damaged！Please read the Product Description before use!.
250 Watt Pico PSU ATX High Mini-ITX Power Supply with adapter board.
Pico power supply Short-circuit protection: output shut down when short-circuit.
DC input connector: 2.5mm inner diameters, 5.5mm outer diameter.
The atx power supply with 24 pin ATX connector, Plugs directly into the ATX connector.
Perfect DC PSU for mini ITX Motherboards.

150 watt Pico PSU ATX High Mini-ITX Power Supply with adapter board.
The mini-itx power supply Short-circuit protection: output shut down when short-circuit,.
Pico power supply input connector: 2.5mm inner diameters, 5.5mm outer diameter.
The atx power supply with 24 pin ATX connector, Plugs directly into the ATX connector,pico psu with adapter.
Perfect DC PSU for mini ITX Motherboards.

Excellent Heat Dissipation: The open chassis design is completely exposed for heat dissipation, freeing up the internal space of the chassis..
Open Frame Computer Case: The split hardware structure is adopted, and the open structure provides you with a large internal installation space..
DIY ITX MATX ATX Computer Case: Bare block frame, easy to disassemble, easy to assemble, stackable, fully experience the fun of DIY..
ATX/M-ATX/ITX Motherboard Case: Support ATX, M ATX, ITX motherboard, power supply supports ATX ordinary large power supply, support expansion of 1 x 3.5, 1 x 2.5 inch hard disk storage, support 7 PCI expansion slots..
Aluminum PC Open Air Case: Made of aluminum, it is strong, durable, stable in use and has a long service life..

★ ★ UNIVERSAL CONNECTORS: The Sleeved Extension Cable Kit uses universal ATX connectors, making the extension cables compatible with any standard ATX power supply unit cables currently on the market. Whether you have any brand's PSUs, you can still use these extension cables with your current or future system..
★★RGB 24 Pin ATX EXTENSION CABLE: Two LED light strips increase the brightness of RGB.Perfect storage your cables, while making your computer mainframe look shiny, making your case more fashionable.If your motherboard not support ARGB/5v3pin connect,please choose this..
★★EASY TO INSTALL: PSU extension cables offers a better solution to modding enthusiasts for you.And the sleaved cable extensions easy to install, save your time.Also maintains the stability of power supply..
★★WIDELY COMPATIBILITY: Packaging including 1x 24Pin RGB ATX cable which support installed in 5V 3PIN. And it is suitable for E-ATX Motherboard, ATX Motherboard, Micro-ATX Motherboard, etc.power range250W-1300W..
★★100% MONEY-BACK GUARANTEE: ♦ We look forward you'd be satisfied with it. If you're not satisfied, return them to us for a fast, no-hassle refund or product replacement..