Best Atx Power Supply Unit

DC 12V 150 watt Pico PSU ATX High Mini-ITX Power Supply with Adapter Board ATX Switch PSU Car Auto for Computer Mainboard and car/Motorcycle

150 watt Pico PSU ATX High Mini-ITX Power Supply with adapter board.
The mini-itx power supply Short-circuit protection: output shut down when short-circuit,.
Pico power supply input connector: 2.5mm inner diameters, 5.5mm outer diameter.
The atx power supply with 24 pin ATX connector, Plugs directly into the ATX connector,pico psu with adapter.
Perfect DC PSU for mini ITX Motherboards.

24-pins Standard ATX Connector, support 20 / 20+4 / 24 pins wire header. With latching button switch to control ATX power supply output ON/OFF..
Total 16 LEDs, it is convenient for you to diagnose the functions of all pins except COM/GND, therefore, if the output of any one wire of your ATX power supply is faulty, it can be seen at a glance..
High quality screw terminal blocks. Each terminal position support current output maximum 10 Amp. Pitch 5.0mm/0.197 inch, Wire range 26AWG to 12AWG / 2.5mm square..
Packing list: 1x Diagnostic breakout board, 4x Screws, 4x Nylon spacers..
Special Note: The PS_ON LED lights up when the output is OFF and goes out when the output is ON, this is just the opposite of the indication status of other LEDs. Since many new ATX power supplies no longer provide output -5V, the NC/-V LED will not light up when connected to this type ATX power supply..

Note：input power 11.4V-12.6V,don't too low or highg,or will be damaged！Please read the Product Description before use!.
250 Watt Pico PSU ATX High Mini-ITX Power Supply with adapter board.
Pico power supply Short-circuit protection: output shut down when short-circuit.
DC input connector: 2.5mm inner diameters, 5.5mm outer diameter.
The atx power supply with 24 pin ATX connector, Plugs directly into the ATX connector.
Perfect DC PSU for mini ITX Motherboards.

Allowing you to connect an additional PSU to your ATX motherboard.
Both PSU will be powered up by one single motherboard.Use a second PSU to power multiple graphics cards.
Compatible with 24 pin and 20+4 pin ATX motherboards (1x 24 pin(20+4) male port and 2x 24 pin female ports).
Designed for intense Gamining and BitCoin Mining.
Material: 18AWG . Length: main cable 12inches + secondary cable 12inches (30cm+30cm).
Dual PSU Power Supply 24-Pin Adapter Cable for ATX Motherboard sata cable 24 pin to 2420+4) pin sata cable JBingGG Dual PSU Power Supply 24 Pin (20+4) Adapter Cable for ATX Motherboard 12-inch ( 30cm ) (24 pin to 24(20+4) pin).
Note: Be sure to recognize the direction when inserting the cable!!! Dont insert the cable backwards or insert the wrong position to prevent the device from being burned!! When inserting the cable, hold the socket of the device before inserting the cable to avoid excessive force to insert the socket pin..
How to use: Plug the 24PIN of the main power supply into the female plug and plug the other end to the motherboard, and plug the secondary power supply into another 24PIN female plug to switch the power at the same time..

24 Pin EPS / ATX power supply jumper bridge tool is compatible with 24/20 pin connector..
24 Pin psu jumper bridge connector plug can run and start up any EPS / ATX power supply by its self..
24 Pin power supply jumper is using Standard 18AWG UL1007 cable for reliability in long use..
Often used when assembling/testing liquid cooling systems, hard drives, fans, testing lights, BTC Miners or the power supply itself..
What You Get: 3x 24-Pin power supply jumper,.

【CPU Power Cable】EPS 12V CPU 8 Pin Female to CPU 8 Pin and ATX 4 Pin Male Power Supply Extension Cable for Motherboard..
【Easy to Install】EPS 12V CPU 8 Pin Female end to plug into 8 pin male to 8 pin male cable of power supply, CPU 8 pin and ATX 4 pin male ends to plug into the motherboard..
【Compatibility】Compatible with all PSUs - ATX, SFX, Fanless PSU. Compatible with motherboard that has 8-pin +12V socket, 4-pin +12V socket or 8-pin +12V socket and 4-pin +12V socket. It is availble to use the single CPU 8pin, single ATX 4 pin or both of CPU 8 pin + ATX 4 pin..
【Specification】Length: 9.5 inch/24cm, Gauge: 1007-18AWG(standard tin-coating copper wire), Quantity: 1pcs..
【Note】This cable is a common power supply Y-splitter extension cable, not converted cable. It supports all of power supplies with CPU 8 pin male port output. It needs to be connected to CPU 8 pin Male to Male Power Cable of PSU. Please use it correctly..

Stable Power Supply: The power supply of G31 computer motherboards is stable and precise, evenly distributed, and the heat load of various power supply chipsets improves the performance of the CPU..
4K Video Interface: M ATX gaming motherboards adopt 4K high definition video interface, COM+VGA high definition interface, support high definition video..
Practical Durable: The performance of solid state capacitors is stable, which greatly extends the service life of the motherboard, and the multi phase power supply is more stable and durable..
Self Contained PCI: M ATX motherboard comes with its own PCI slot, which is an expansion slot based on PCI local bus..
PCB Material: M ATX gaming motherboards are made of PCB material, strong and durable, all solid state panel, long lasting..