Best Atomizing Nozzle

3M Performance Spray Gun Starter Kit 26778 Includes PPS 2.0 Paint Spray Cup System 15 Replaceable Gravity HVLP Atomizing Heads Air Control Valve

KIT INCLUDES: 1 Spray Gun, 15 Gravity HVLP Atomizing Heads, 3M PPS Series 2.0 Spray Cup with 5 lids and liners.
PRECISION SPRAY PERFORMANCE: Delivers excellent transfer efficiency, a large adjustable fan pattern with smooth trigger pull.
REPLACEABLE NOZZLES: 5 each of quick-change replaceable atomizing heads in size 1.2, 1.3, 1.4.
it’s like getting a brand-new spray gun with every new nozzle.
PAINT SAVINGS: Excellent transfer efficiency means you can mix less paint with the same or better coverage.
SPRAY A FULL RANGE OF AUTOMOTIVE COATINGS: Including solid colors, pearls, metallics, clearcoats, sealers and primers.

Check Stock

3M Accuspray Paint Spray Gun Nozzle Refills for PPS 2.0, 26618, 1.8 mm, Clear, Use with PPS 2.0 Spray Gun System for Like-New Paint Spray Performance, 4 Pack

REFILL NOZZLES FOR PAINT SPRAY GUN – Replacement atomizing heads for use with the Accuspray handheld HVLP paint gun and PPS 2.0 Spray Cup System with disposable lids and liners.
LIKE-NEW PERFORMANCE AGAIN AND AGAIN – Refill nozzles can be used 5 to 10 times, then removed and replaced for the performance of a brand-new gun.
CLEAR 1.8 MM NOZZLE – Ideal for higher-viscosity materials like primer.
MANY SIZES FOR MANY USES – Other nozzle sizes let you easily spray paints, stains, varnishes, basecoats, primers, sealers, clearcoats and more, for a range of applications from one gun.
LESS WASTE, EASY TO CLEAN – With Accuspray, the paint doesn’t run through the gun – it flows directly from the cup into the atomizing head and is sprayed onto the surface. This eliminates a huge amount of the cleanup and solvent use that conventional paint guns require.
ADJUSTABLE SPRAY PATTERN – Simply twist the clear air cap 45 degrees to change your spray pattern from horizontal to vertical and back again for the most efficient paint application.
CONVENIENT DESIGN – See-through nozzles make it easy to tell when the heads are clean.
For industrial/occupational use only. Not for consumer sale or use..

Check Stock

Dynatron Auto Body Seam Sealer Metal Repair 12 oz Weld gap filler MS-550 trailer

PRECISION SPRAY PERFORMANCE: Delivers high transfer efficiency, a large adjustable fan pattern with smooth trigger pull.
KIT INCLUDES: 1 Spray Gun, 15 Gravity HVLP Atomizing Heads, 3M PPS Series 2.0 Spray Cup with 5 lids and liners.
REPLACeABLE NOZZLES: 5 each of quick-change replaceable atomizing heads in size 1.2, 1.3, 1.4.
it’s like getting a brand-new spray gun with every new nozzle.
PAINT SAVINGS: Superior transfer efficiency, with up to 26% less material waste than leading metal spray guns, you can mix less paint with the same or better coverage.
SPRAY A FULL RANGE OF AUTOMOTIVE COATINGS: Including solid colors, pearls, metallics, clearcoats, sealers and primers.
stainless-steel reinforced composite material is up to 50% lighter than conventional metal spray guns.
DURABLE: Impact-resistant spray gun body was designed to perform and built to last.
COMFORTABLE: From the body to the trigger, the spray gun was optimized to deliver improved comfort.
For industrial/occupational use only. Not for consumer sale or use..

Check Stock

REDMAT Misters for Outside Patio Misting Cooling System with Misting Line and Brass Mist Nozzles for Fan Patio Garden Greenhouse Trampoline Waterpark (50ft-2)

【Two Sizes of Nozzles】The misting system kit is equipped with 2 nozzles with different aperturesthe.One of 0.8mm brass atomizing nozzle can effectively increase the humidity, cover a larger area than traditional watering. The 0.2mm brass atomizing nozzle can provide very fine water mist. Misting fans provide a humid and cool environment for your favorite indoor and outdoor..
【Updated Design】The water mister equips with a universal adapter(3/4") , flexible durable PE misting line, upgraded brass nozzles which are no leaking and have more smooth spray, good sealing tubing connector. All the accessories have a good quality, good sealing, no water leakage, no dripping, longer service life..
【Water & Energy Saving】The outdoor mister for patio uses water directly to misting and cool down, no electricity required. Upgraded nozzles create cool mist with minimum water, beautify the environment, improve air quality , reduce dust and cool the heat..
【Variety of Applications】Mister for watering is a good choice for outdoors and games. Misters can reduce dust particles. The Mister system provides continuous atomized water for gardens, landscaping, and plants. Misting cooling system is widely used in your garden, backyard, greenhouse, terrace, Waterpa....

Check Stock

Misting Nozzles 10Pcs Brass Material 28g / 1oz Weight Tap Water Low Pressure 0.2mm/ 0.01in orifice greenhouses

¡¾Brass material¡¿Tap water lowpressure atomizing nozzle, made of brass material, which is durable and corrosionresistant..
¡¾Oshaped sealing ring¡¿With Oshaped sealing ring, it can effectively prevent water leakage, easy to install and use..
¡¾0.2mm diameter¡¿The hole diameter is about 0.2mm, fine mist, good atomization effect, and wide spray range..
¡¾Low fluid resistance¡¿This nozzle has good water saving performance, low fluid resistance and long service life..
¡¾For landscaping, outdoor cooling systems etc.¡¿Suitable for landscaping, outdoor cooling systems, greenhouses, humidification, deodorization, air purification, small fountains, etc..

Check Stock

Bluecell 8pcs High Pressure Brass Misting Nozzles Fogging Spray Head for Outdoor Cooling System, 0.016\ Orifice (0.4mm) 10/24 UNC Thread

Package including 8pcs High Pressure Atomizing Sprayer.
!!!NOTE: Operation Pressure: 30-80kg/cm2 (430-1140 PSI), optimal operating pressure, please ensure that these Fogging Spray Heads is suitable for your misting system before purchase..
Nozzle: 0.016 inches (0.4 mm) orifice, screw into any 10/24-threaded mist nozzle opening.
Made of Brass, never Rust, best choice for outdoor use with cold water. Suitable for high-pressure spray system..
Perfect for garden watering, greenhouse nursery, Landscaping, spray disinfection and Outdoor Cooling Mister System, etc..

Check Stock

Gel Coat Spray Gun Gelcoat Dump Gel Coat Sprayer Air Spray Gun Painting Tool Kit for DIY Home Fiberglass Spraying Coating Tool 0.3-0.6Mpa with Spray Nozzles

...g films, spray gypsum, tooling gelcoats, sandable primers, granite enhanced gelcoats, adhesives and paints..
【OPERATION TIPS】The nozzle should always face upward to prevent the nozzle from leaking, tilt the gun body, spray the material, and adjust the control valve. By atomizing the raw material to a better state, the nozzle is aligned with the surface of the mold to perform jet production. (Recommendation: When injecting, the tip is at a 90 degree angle to the surface of the mold.).

Check Stock

Master Pro 44 Series High Performance HVLP Spray Gun Ultimate Kit with 4 Fluid Tip Sets 1.3, 1.4, 1.5 and 1.8mm and Air Pressure Regulator Gauge - Automotive Basecoats, Clearcoats, Primers Woodworking

Master Pro 44 Series Ultimate Kit: Includes a Master Pro 44 Series High Performance HVLP Spray Gun with 1.3mm Fluid Tip (Installed) plus complete 1.4 mm, 1.5 mm and 1.8 mm atomizing sets with matching needle, fluid nozzle and air caps. Gun has a 1 liter aluminum cup and comes with a high flow air pressure regulator with gauge. Includes an MPS Adapter to use disposable cups..
4 Fluid Tip Atomizing Set: The ultimate spray gun set-up to spray the lightest to heavy coatings, and all with the same gun. The 1.3 mm and 1.4 mm fluid tip set-ups are ideal for use with base coats, clear coats, single stage, primer sealers and other light to medium viscosity paint coating materials. The 1.5 mm and 1.8 mm size fluid tip set-ups are better for single stage topcoats, primers, 2K primers surfacers and other medium to high viscosity paint coating materials..
Superior Atomization Technology: Achieve perfect performance with all paint coatings because of the innovative technology in this spray guns needle, nozzle and air cap system. Paint coatings are fully atomized with the ideal fan pattern, so that they lay down perfectly for a clean even basecoat or topcoat finish. Premium performance with all types automotive, industrial, and woodworking coatings..

Check Stock

LVLP Spray Gun R500 1.3mm Gravity Feed Car Paint Spray Gun – Ideal Paint Sprayer for Automotive Basecoats, Clearcoats, Primers, Industrial & Woodworking Coatings

Heavy-duty Paint Sprayer: Each spray gun is a one-piece all-steel gun body, rust-resistant stainless-steel nozzle and solid brass cap for durability and longevity..
LVLP Spray Gun: LOW VOLUME LOW PRESSURE,high paint transfer efficiency and low paint consumption,economical and environment-friendly..
1.3MM Nozzle: Best for atomize waterborne paints and high flow sprays, Ideal for auto refinishing and household painting, like funiture, fence, locker, small equipment etc..
SPECIFICATIONS: Air consumption 3.0-3.9CFM, Operation pressure 28.8-51 PSI, Working pressure ＜10 PSI (HVLP), Pattern Width: 7.0”-10.9”, Air inlet 1/4 “, Paint ratio >= 65%V.
Easy to clean: The fence paint sprayer is easy to assemble and disassemble. you will need to remove the cap and nozzle with the provided tool, and use the little brush to clean out the paint chamber. Once everything is clean, used compressed air to blast out any lingering water and leave the gun disassembled to dry..
1 Year Warranty, Larger 1.5 mm 1.7mm and 2.0 mm atomizing sets with matching needle, fluid nozzle, and air caps are also available separately..

Check Stock