Best Astm Cnc Machining Part

Face End Mill, Mt3-Fmb22 Holder Extension 400R50-22 Face End Mill Cutter 10Pcs Apmt1604 CNC Carbide Inserts for Plate Cutting Heavy CNC Milling Cutting

HIGH-PRECISION MACHINING: Hardened high-precision shock resistance, good permeability, multiple impact resistance, good low temperature impact toughness, strong and durable, can increase the service life and shock resistance of the cutter head.
GOOD IMPACT RESISTANCE: Our end mills are ideal for heavy duty CNC milling, Model: 400R--Bore: 22--Number of Inserts: 4--Type of Insert: APMT1604--Number of Inserts: 10 Pieces.
MACHINING RANGE: This MT3-FMB22 holder has better cleanliness and more stable precision, can be used for sheet metal cutting, hardened inserts for steel.
EMBEDDED TOOL HOLDER: The lathe tool holder is embedded, which is easier to control than the flat-tail type tool holder, with high precision, and the threaded connection holes are connected more tightly, reducing machining errors.
WIDE RANGE OF APPLICATIONS: Lathe extension rods are the main accessories commonly used in milling CNC machine tools, fixture milling machines, horizontal boring machines, ordinary boring and milling machines, drilling machines, bench drills and small machine tools.

Check Stock

Vbestlife Single Speed Chain Tensioner, Aluminum Alloy Folding Bike Chain Stabilizer Bike Chain Tensioner for Single Speed Folding Bike(Black)

[Aluminum Alloy Material]- Bicycle tensioner is made of high quality aluminum alloy material, which is hard, stable, durable and can be used for a long time..
[Bearing Shaft]- The Bike chain tensioner uses a bearing shaft, which can be matched with a variety of guide wheels. The guide wheels generally use 11 teeth, and can also use 13 teeth..
[CNC Machining]- Exquisite workmanship, full CNC accurate machining, anode color, laser engraving sign, suitable for single speed folding bicycles..
[Prevent Falling Off]- Folding bicycle chain stabilizer can effectively prevent the chain from falling off due to instability during riding..
[Easy to Install]- Exquisite workmanship, stylish and generous appearance, stable workmanship, easy to install and disassemble, simple operation..

Check Stock

Fiber Optic Cutter, Thickened Slide Rail 3 in 1 Clamp Fiber Cable Cutting Tool with Hex Wrench for Electrical Repair

STABLE SLIDE RAIL: Using thickened slide rail, which has high rigidity, and the automatic knife return is and not stuck, which is convenient to use..
EFFICIENT CUTTING: The average cutting angle is less than 0.5 degrees, and the 16 sides cutting end face design ensures stable cutting, efficient and reliable..
3 IN 1 CLAMP: This fiber cutter has 3 in 1 clamp design, which can cut 0.9mm pigtail slot, 0.25mm bare fiber slot and 2.5‑3.0mm insulated wire slot..
CNC MACHINING: Manufactured by CNC machining equipment, the fiber cutter has high accuracy and small operating error, with a wide application range..
TUNGSTEN STEEL: The cutting blade is made of tungsten steel, with high hardness, wear resistance and corrosion resistance, has a long service life..

Check Stock

Peter-Putter ((2) Black)

EXCEPTIONAL QUALITY – Crafted with high-grade 303 stainless steel billets by a veteran master machinist to the highest quality standards..
CNC PRECISION MILLED – A total of nine manufacturing operations are required to create a beautiful custom putter to the highest tolerances only attainable from CNC precision machining..
25 YEARS OF RESEARCH – Feedback from golf professionals, metals experts, CNC machinists, and golfers at all skill levels have gone into creating a superb putter that gives you your best performance..
HEADCOVER – Included to keep your putter protected when not in use..
MADE IN USA – Putters crafted 100% from design to production in America’s heartland of Nebraska..

Check Stock

SpeTool Tapered Ball Nose End Mill 1/4\ X 3\ with 0.5mm Tip Diameter(0.25mm Radius) Ball Nose 5.26Deg Router Bit for CNC Machine Engraving Carving Bits H-Si Coated

【1】Brand: XJL 【2】Name: Nano Ball Nose End Mill 65° 【3】Material: tungsten steel.
Bar: 0.4um granular tungsten steel 【4】Coating layer: NANO.
For high-hard materials and high-speed machining fields, the optimized NANO silicon nitride coating makes the tool have high-temperature stability.
【5】Number Of Flutes：2F,Spiral Angle: 35°Double edge belt + Negative rake Angle design 【6】Applicable cutting materials: Alloy steel, carbon steel, quench and tempering steel die steel HRC 55-65° of high hardness materials. 【7】Suitable for machine: CNC machining center, engraving machine, high-speed machine,dry cutting,etc.
【8】Processing methods: finish machining, semi-finish machining, curved surface machining, arc machining, irregular machining.
【9】Main features:milling cutter for high-hardness and high-speed cutting applications. The edge is coated with NANO-BLUE coating, which can directly perform high-speed rough machining and fine machining on heat-treated materials below 65°, reduce the number of tool changes, advance the productivity of machine tools, save the groove design and grinding method of manufacturing time, and have the advantages of high chip conduction, AG, long service life and high surface finish after machining..

Check Stock

SpeTool 12501 2 Flutes Carbide CNC End Mill For Aluminum (1/4 Shank, 2.5 inch Long) Router Bit Spiral Mill

Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 3/4 inch Cutting Length, 2-1/2 inch for Total Length.
The EndMill With Flat Top, 2-Flutes, Large Chip Pocket, Easy Chip Removal..
For Aluminum, Non-ferrous Metal, Plastics, Plywood, OAK, MDF, and Any Hardwood Working and Long service life for sharp.
The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
End Mill Bits are Suitable for Slot Machining, Side Face Machining, Hole Machining. Please Adjust the Speed, Feed and Cutting Depth According to Actual Cutting Conditions..

Check Stock

Genmitsu 4pcs 2-Flute Tapered Ball Nose End Mills Tungsten Carbide Cutter with Nano Blue Coat R0.25-1.0 1/8” Shank TB04A

High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality..
Cost-Effective: Coming with 4x 2-Flute tapered ball nose end mills, Shank Diameter: 3.175mm, Radius: 0.25, 0.5, 0.75, 1.0mm, Cutting Length: 15mm, Overall Length: 40mm..
Versatile: Perfect for 3D machining jobs like molds, rapid prototyping, models and other other precision parts processing, these Tapered ball nose bits can do the best..
Applicable Materials: These nano blue coating bits have an HRC rating of 65 and are optimal for milling a wide range of materials, including plastics, aluminum, circuit board, wood, etc. To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below..
Wide Compatibility: Genmitsu TB04A tapered ball nose end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure ....

Check Stock

TOPOINTARCHERY Unison Aluminum CNC Milling Recurve Bow Riser 25 Targeting Takedown Recurve Bow Riser Right Handed ILF Device for Archery Bow Targeting Smoke Right Handed

Ship From The USA Warehouse Receive The Bow Riser Immediately.
CNC Machining Center High accuracy Machined Anodized Aluminium Alloy 6061-T6,Wooden Grip Same Color With The Riser.
ILF Limb alignment system,fit for all ILF limbs..
Special alignment system,prevent the screw loosening design,could fit the Limbs degree angle,protect the limbs contacting part, for better....
Important Point:Bow Riser Only,String And Limbs Are Not Included In The Package.

Check Stock

(2 Pack) Round Acetal Copolymer Rods - Standard Tolerance 1-Inch Diameter and 12-Inch Length Opaque Black Acetal Copolymer Rods Meets ASTM D6778 Specifications Perfect for Non-Marring Fixtures

... parts that require durability and wear resistance like in non-marring fixtures, electrical insulators, and bushings.
VERSATILE AND DEPENDABLE MATERIAL - Acetal copolymer has applications in a wide variety of industries and niche interests. It is used in string instruments as a dulcimer bridge/nut. It's even used in machining applications as a washer and an arbor material. There are also mandrels made of acetals. Other applications include buffer spacers/pins,.
HIGH MOISTURE RESISTANCE - Among different types of acetals, acetal copolymer has the highest moisture, humidity, and high-temperature resistance. It doesn't easily deteriorate or wear in wet environments. And because it absorbs minimal moisture, acetal copolymer retains its physical properties in different environments..
ZERO CENTERLINE POROSITY - Centerline or core porosity occurs when the acetal's outer layer solidifies faster resulting in a loss of volume in the rod's core. This is a big issue in acetal homopolymers. Acetal copolymers naturally have lower centerline porosity but with an excellent manufacturing process, it is possible to achieve zero centerline porosity, preventing outgassing and water penetration..
HIGHLY MACHINABLE - Aside from machining on a lathe, acetal copolymers are easy....

Check Stock