Valhalla Custom Kydex Sheath Ka-bar Becker BK9 COYOTE BROWN One Piece
- Knife Made in the USA, Sheath made in Taiwan.
Best Astm Angle Steel Bar
Accusize Industrial Tools 3/8'' by 4.33'' Right-Hand Sclcr Coolant Through Indexable Boring Bar with Ccmt Insert 21.51, 2800-0035
- General purpose boring bar fitted with rhomboidal positive inserts (80°angle) which are free cutting with strong cutting edges..
- The coolant hole with a diameter range varying between 3/32" and 5/32" in accordance to the bar size allows to cool the cutting edge and remove chips..
- The inserts is set with a 0° rake angle and an inclination angle shown in the table below..
- Made of tool steel with nitrogen superficial treatment, Hardness 60 HRC, blackening by PVD coating, thickness 0.0002"..
- Extreme gloss finish, Bar hardness approximately 45HRC.
Advantech - 10SS8F Stainless Steel Test Sieves, 8\ Diameter, #10 Mesh, Full Height
- Stainless Steel frame, stainless steel wire cloth.
- Full height (2 inch depth to wire cloth).
- Serial number is etched on each sieve and contained in a bar-coded label, tracing vital information.
- Comes with Certificate of Compliance applicable to ASTM E 11 specifications.
RIMKOLO Pry Bar Set,5-Piece Heavy Duty Pry Bar with Thicker Strike Caps,4-Piece with Angled Tip and 1-Piece with Straight Tip
- 【APPLY TO ANY SPACE】: Sharp angle tip, easy to enter the narrow gap. The combination of angle head and straight head is more convenient and widely used..
- 【WITH STRIKE CAP】: Ergonomic handle, comfortable and antiskid. The end of the handle is provided with a strike cap, which allows the pry bar to be struck into place with a hammer..
- 【SOLID】: Made of high-quality chrome vanadium steel, which is harder after heat treatment and not easy to distort and deform. The crowbar with proper proportion length is more labor-saving..
- 【DURABLE】: The pry bar surface is protected by black oxide film, Anti corrosion and anti rust, extending service life. Thicker crowbar, stronger and more durable..
- 【5-PIECE PRY BAR SET】: 4x Angle head pry bar: 8" 12" 18" and 24.
ADVANTECH - 80SS8F Advantech Stainless Steel Test Sieves, 8\ Diameter, #80 Mesh, Full Height
- Stainless Steel frame, stainless steel wire cloth.
- Full height (2 inch depth to wire cloth).
- Serial number is etched on each sieve and contained in a bar-coded label, tracing vital information.
- Comes with Certificate of Compliance applicable to ASTM E 11 specifications.
Moen R8732P Home Care Bathroom Safety 32-Inch Grab Bar with Concealed Screws, Peened, Stainless
- Able to support up to 500 lbs of pull force to provide a stable, with knurled textured anti-slip grip, reliable handhold.
- Made of stainless steel for a lasting strength and quality..
- Concealed secure mount design allows for easy, secure installation at any angle, allows you to cover any unsightly screw holes and continue a clean, sleek trend to your bath and shower..
- Use iMomwee 24 inch anti-slip safety grab bars in commercial and residential places as in the bathroom, kitchen, along stairways, swimming pool, laundry room,toilet, bathtub and shower safety grab Handrails for additional fall prevention, especially for the handicap, elderly, disabled, pregnant women and children. Not only apply to use as bath shower grab bar, but also can hold clothing,towel and etc..
- The total length is 24 inch. 1.25 inch bar diameter allows enough space to easily grip bar for added support.
- Anti-slip grab bar is made of durable stainless steel construction. It's a good choice for anywhere you need a helping hand to balance you..
- iMomwee 24-Inch Concealed Mount Safety Bath and Shower Grab Bars backed with 3 Years of Free Replacement Warranty. These 24in grab bars can be permanently used once it's properly installed..
- iMomwee 24 inch chrome finished anti-slip shower gra....
KES Hand Shower Slide Bar Stainless Steel with Height Adjustable Shower Head Holder Wall Mounted Polished Chrome, F200-CH
- Universal Shower Holder: Shower holder has two openings of different sizes: 21mm and 19mm. 21mm opening should be face up. Our shower holder is compatible with 95% shower heads. Please remember to check if the opening is upside down in case your shower does not fit..
- Stainless Steel Bar: Sliding bar is made of Stainless Steel, durable and rust-proof. Extra thick bar will not bent nor dent from day to day use..
- Adjustable Bracket: Engineering Grade ABS Material Shower Bracket, allows you to adjust any height or angle of handheld shower head after installation. Shower height and angle can be easily adjusted to accommodate both kids and adults, providing perfect shower experience for every family member..
- Quality Finish: Industry-leading multi-layer finish, build to resist daily scratches, corrosion and tarnishing..
- Installation Instruction Included: Packages include sliding bar, shower holder, hardware pack and detailed installation guide. Wall mounting installation. NOTE: Shower head and shower hose are not included. If you need those, please search for B00KNJUL70..
ABN Adjustable Pry Bar Set Heavy Duty 11-Point Indexing Pry Bar Set Automotive Pry Bar 3pc Kit – 8in, 12in, 16in
- ...| Pry Tool Indexable Pry Bar Kit 3-Piece Set to remove engine and axle drive seals, pull diesel injectors, position engines, align steel components, and reposition equipment.
- Each automotive pry bar tool has a full 180-degree indexable head swing that you can set to 1 of 11 different locking positions for the right angle and leverage to access hard-to-reach spots.
- Simply push down button on head and turn claw to angle.
- BUILT TO LAST: Constructed with a strong locking device on index and full chrome-vanadium steel (CR-V) body with a manganese phosphate finish for maximum strength and longevity that resists rust and corrosion.
- Adjustable prybar tool set meets or exceeds ANSI specifications.
- GRIP COMFORTABLY: Ergonomic thermoplastic rubber (TPR) handle on each auto pry bar allows for maximum grip and leverage with less user fatigue and more productivity.
- EASY STORAGE: Heavy-duty 17.5” x 2.4” x 8.2” inch (44.5cm x 6.1cm x 20.8cm) plastic blow-molded carrying case with latches and built-in handle for easy transportation, safe storage, and quick organization.
- PACKAGE CONTENTS: Pry bars heavy duty flat bar tool kit includes (3) adjustable and indexable angle pry bars (8”, 12”, 16” inch) and (1) carrying case.
- Varied handle lengths allow for perfect ....
Boerboel Gate Solutions 73023172 Black Standard Strap Hinge
- Designed for wood gates or vinyl gate applications. Holds gate up to 60-in wide and 35-lbs. Max angle 160 degrees..
- Kit includes one standard gate strap hinge, 1 back plate, 9 - 1 1/4" stainless steel Phillips self-driving screws, 3 - 1 1/2" stainless steel lag....
- Easy installation on posts with 2 1/2" or larger post dimension and gates with 2" or larger rails.
- Made out of powder coated aluminum, ASTM B117 Salt-Spray tested and passed.
- Unmatched protection for unmatched gate hardware, with the warranty coverage to prove it. Covered by our Limited Lifetime Warranty, you can rest....