Best Asme Jis Flange

Sur-Seal, Inc. Teadit 90004304GR300 Yellow Band with Gray Stripe Spiral Wound Gasket, High Temperature (Thermal Cycling) and/or Pressure Variations, 4\ Pipe Size, 300# Class Flange, 304SS Windings with a Flexible Graphite Filler

  • ASME B16.20 Gaskets for ASME B16.5 Flanges/Class 300.
  • Centering ring accurately locates the gasket on the flange face, provides additional radial strength, and acts as a compression limiter.
  • Spiral winding (sealing element) consists of metal and soft filler material.
  • Temperature range (F) : -150 to 842 Degrees.
Check Stock

JET 2-HDT 2-Ton Manual Trolley 262020

  • SAFETY: Built-in bumper guards on the side plates increase safety, and extend trolley life..
  • VERSATILITY: Easily adjusts to wide-flange H-beams, standard I-beams, or curved track..
  • DURABILITY: Welded all-steel frame and powder coat finish provide maximum protection..
  • CERTIFICATION: Load-tested to 125% of capacity with certificate..
  • COMPLIANCE: Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards..
Check Stock

JET 1-PT, 1-Ton Heavy-Duty Manual Trolley (252010)

  • Compatibility: Easily adjustable to wide-flange H-beams, standard I-beams, or curved track..
  • Extended Life: Built-in bumper guards on the side plates..
  • Smooth Movement: Hardened large steel wheels and thicker double sealed lubricated ball bearings..
  • Maximum Durability: Welded heavy gauge steel frame and powder coat finish..
  • Certified Safety: Complies with OSHA Regulations, and ANSI / ASME B30.11 and B30.17 standards..
Check Stock

RW 0059-005/006 JIS Japanese Industrial Standard 7-Piece JIS Driver Set Includes 3 JIS Screwdrivers #1 2 3 and 4 JIS 1/4 Impact Bits #2 3 Short & Long

  • JIS (Japanese Industrial Standard) Screwdrivers & Bits.
  • Contains (7) items total: Screwdrivers (1) JIS #1 75mm shaft, (1) JIS #2 100mm shaft, (1) JIS #3 150mm shaft, Bits: (1) JIS #2 Short 25mm size, (1)....
  • Made of Chrome Vanadium steel (drivers) and S2 steel (bits).
  • Excel with vintage machines with hard to remove fasteners. These do not slip out.
Check Stock

12\x12\x1\ Ceramic Fiber Blanket Insulation 6# 2300F for Wood Stoves, Pizza Ovens, Kilns, Forges, Fireplaces & More - (6 Pack)

  • SSS style 913M, 316 stainless steel spiral wound gaskets with 316 stainless steel inner ring are a precision-engineered sealing solution for flat and raised face flanges and flanged joints.
  • Style 913M gaskets supplied by Sterling Seal & Supply Are also suitable for heat exchangers, boiler hand holes, manholes, and other high-temperature, high-pressure applications.
  • Gasket identification markings required by ASME B16.20 clearly etched in all gaskets. These gaskets excel in the prevention of flange erosion, inward buckling and reduction of turbulent flow.
  • Installation tip: spiral wound gaskets with internal or external guide Rings should be fully compressed to the guide ring. This will NOT damage the gasket or affect the sealing performance.
  • Installation tip: check that flange faces are clean and in good condition. Ensure correct bolting material is utilized to suit the operating conditions, and the use of Bolt lubrication is employed.
Check Stock

24\x24\x1\ Ceramic Fiber Blanket Insulation 6# 2300F for Wood Stoves, Pizza Ovens, Kilns, Forges, Fireplaces & More - (4 Each)

  • SSS style 913M, 316 stainless steel spiral wound gaskets with 316 stainless steel inner ring are a precision-engineered sealing solution for flat and raised face flanges and flanged joints.
  • Style 913M gaskets supplied by Sterling Seal & Supply Are also suitable for heat exchangers, boiler hand holes, manholes, and other high-temperature, high-pressure applications.
  • Gasket identification markings required by ASME B16.20 clearly etched in all gaskets. These gaskets excel in the prevention of flange erosion, inward buckling and reduction of turbulent flow.
  • Installation tip: spiral wound gaskets with internal or external guide Rings should be fully compressed to the guide ring. This will NOT damage the gasket or affect the sealing performance.
  • Installation tip: check that flange faces are clean and in good condition. Ensure correct bolting material is utilized to suit the operating conditions, and the use of Bolt lubrication is employed.
Check Stock

Sunflag +1 +2 +3 JIS Screwdrivers | Made in Japan (Perfect Grip)

  • Sunflag No3370 Perfect Grip +1 +2 +3 JIS Screwdrivers. Manufactured according to JIS B4633 Standard.
  • These Japanese Cross Point screwdrivers are designed to fit JIS (Japanese Industrial Standard) screws and Phillips screws.
  • JIS screws are used in most Japanese brands - Cars, motorcycles, cameras, fishing reels, push bike gears, printers and photocopiers, and lots of other products.
  • 3 piece set includes +1 X 75mm, +2 X 100mm, +3 X 150mm soft polymer handle screwdrivers with magnetic tips.
  • Full metal tang-thru design so these can be it with a hammer to loosen stubborn or rusty screws | Made in Japan.
Check Stock

3/8-16 Serrated Flange Hex Lock Nuts, Stainless Steel 18-8 (304), Bright Finish, 25 PCS

  • Flanged base eliminates the need for a washer when fastening components.
  • Self-locking serrated flange digs into the material being fastened to help prevent loosening.
  • Hex body has six flat sides that a wrench can grip to turn from the side, enabling use when there is no space above the nut.
  • 18-8 stainless steel provides good corrosion resistance and strength, while plain surface has no finish or coating.
Check Stock

BOCCHI 1604-504-0126 Campino Uno Dual Mount Single Bowl Granite Kitchen Sink, Matte Black

  • IMPACT, HEAT & SCRATCH RESISTANT: Molded from fine quartz to resist impact damage, chipping and scratches.
  • Easy to clean, non-porous surface resists staining, washes clean with soapy water.
  • Fits a 36 inch (minimum) cabinet base with Dual-Mount Installation—choose between Undermount or Drop-In.
  • Sink can accommodate a garbage disposal - Flange extension not needed.
  • Limited Lifetime Warranty, ASME A112.18.1/B125.1 and cUPC.
Check Stock