Best Asme Flange

JET 2-HDT 2-Ton Manual Trolley 262020

SAFETY: Built-in bumper guards on the side plates increase safety, and extend trolley life..
VERSATILITY: Easily adjusts to wide-flange H-beams, standard I-beams, or curved track..
DURABILITY: Welded all-steel frame and powder coat finish provide maximum protection..
CERTIFICATION: Load-tested to 125% of capacity with certificate..
COMPLIANCE: Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards..

Compatibility: Easily adjustable to wide-flange H-beams, standard I-beams, or curved track..
Extended Life: Built-in bumper guards on the side plates..
Smooth Movement: Hardened large steel wheels and thicker double sealed lubricated ball bearings..
Maximum Durability: Welded heavy gauge steel frame and powder coat finish..
Certified Safety: Complies with OSHA Regulations, and ANSI / ASME B30.11 and B30.17 standards..

SSS style 913M, 316 stainless steel spiral wound gaskets with 316 stainless steel inner ring are a precision-engineered sealing solution for flat and raised face flanges and flanged joints.
Style 913M gaskets supplied by Sterling Seal & Supply Are also suitable for heat exchangers, boiler hand holes, manholes, and other high-temperature, high-pressure applications.
Gasket identification markings required by ASME B16.20 clearly etched in all gaskets. These gaskets excel in the prevention of flange erosion, inward buckling and reduction of turbulent flow.
Installation tip: spiral wound gaskets with internal or external guide Rings should be fully compressed to the guide ring. This will NOT damage the gasket or affect the sealing performance.
Installation tip: check that flange faces are clean and in good condition. Ensure correct bolting material is utilized to suit the operating conditions, and the use of Bolt lubrication is employed.

SSS style 913M, 316 stainless steel spiral wound gaskets with 316 stainless steel inner ring are a precision-engineered sealing solution for flat and raised face flanges and flanged joints.
Style 913M gaskets supplied by Sterling Seal & Supply Are also suitable for heat exchangers, boiler hand holes, manholes, and other high-temperature, high-pressure applications.
Gasket identification markings required by ASME B16.20 clearly etched in all gaskets. These gaskets excel in the prevention of flange erosion, inward buckling and reduction of turbulent flow.
Installation tip: spiral wound gaskets with internal or external guide Rings should be fully compressed to the guide ring. This will NOT damage the gasket or affect the sealing performance.
Installation tip: check that flange faces are clean and in good condition. Ensure correct bolting material is utilized to suit the operating conditions, and the use of Bolt lubrication is employed.

Flanged base eliminates the need for a washer when fastening components.
Self-locking serrated flange digs into the material being fastened to help prevent loosening.
Hex body has six flat sides that a wrench can grip to turn from the side, enabling use when there is no space above the nut.
18-8 stainless steel provides good corrosion resistance and strength, while plain surface has no finish or coating.

IMPACT, HEAT & SCRATCH RESISTANT: Molded from fine quartz to resist impact damage, chipping and scratches.
Easy to clean, non-porous surface resists staining, washes clean with soapy water.
Fits a 36 inch (minimum) cabinet base with Dual-Mount Installation—choose between Undermount or Drop-In.
Sink can accommodate a garbage disposal - Flange extension not needed.
Limited Lifetime Warranty, ASME A112.18.1/B125.1 and cUPC.

Sterling Seal Style 9000 stainless steel spiral wound gaskets are a precision-engineered sealing solution for flat and raised face flanges and flanged joints.
Sterling Seal Style 9000 gaskets are also suitable for heat exchangers, boiler hand holes, manholes, and other high-temperature, high-pressure applications.
Gasket identification markings required by ASME B16.20 clearly etched in all gaskets. These gaskets Excel in the prevention of flange erosion, inward buckling and reduction of turbulent flow.
Installation tip: spiral wound gaskets with internal or external guide Rings should be fully compressed to the guide ring. This will NOT damage the gasket or affect the sealing performance.
Installation tip: check that flange faces are clean and in good condition. Ensure correct bolting material is utilized to suit the operating conditions, and the use of Bolt lubrication is employed.

Sterling Seal Style 9000 stainless steel spiral wound gaskets are a precision-engineered sealing solution for flat and raised face flanges and flanged joints.
Sterling Seal Style 9000 gaskets are also suitable for heat exchangers, boiler hand holes, manholes, and other high-temperature, high-pressure applications.
Gasket identification markings required by ASME B16.20 clearly etched in all gaskets. These gaskets Excel in the prevention of flange erosion, inward buckling and reduction of turbulent flow.
Installation tip: spiral wound gaskets with internal or external guide Rings should be fully compressed to the guide ring. This will NOT damage the gasket or affect the sealing performance.
Installation tip: check that flange faces are clean and in good condition. Ensure correct bolting material is utilized to suit the operating conditions, and the use of Bolt lubrication is employed.

Sterling Seal Style 9000 stainless steel spiral wound gaskets are a precision-engineered sealing solution for flat and raised face flanges and flanged joints.
Sterling Seal Style 9000 gaskets are also suitable for heat exchangers, boiler hand holes, manholes, and other high-temperature, high-pressure applications.
Gasket identification markings required by ASME B16.20 clearly etched in all gaskets. These gaskets Excel in the prevention of flange erosion, inward buckling and reduction of turbulent flow.
Installation tip: spiral wound gaskets with internal or external guide Rings should be fully compressed to the guide ring. This will NOT damage the gasket or affect the sealing performance.
Installation tip: check that flange faces are clean and in good condition. Ensure correct bolting material is utilized to suit the operating conditions, and the use of Bolt lubrication is employed.