Best Arduino Soldering Kit

9V Battery Holder E-outstanding 2PCS Black 6F22 9V Battery Storage Case Box with 2.1x5.5mm DC Male Plug and Wire Leads for Arduino UNO R3 Battery Clip Container

  • Made of high quality materials. Lightweight and easy to carry..
  • Designed with spring clips for easy battery installation and removal..
  • EASY TO INSTALL AND SAVE WORK: The cable comes with a 9V battery holder and 3 screw fixing holes on the base for easy fixation.
  • With this snap cable you can save yourself the work of soldering the battery snap to the DC coax plug.
  • Widely used in Arduino Uno, Arduino Due, Arduino Mega 2560, Arduino Ethernet Shield, Development Boards, Evaluation Boards, Breadboards, Arduino DIY,....
Check Stock

Breadboard Wires Jumper Wires Dupont Cable 120pcs Multicolored 20cm 40 pin Male to Female,Male to Male,Female to Female Breadboard Jumper Wires Ribbon Cables Kit

  • Jumper Wires Kit,Michael Josh Electrical Solderless Breadboard Ribbon Cables.
  • The Jumper Cable can be separated according to the demand.
  • Compatible with 2.54mm spacing pin headers,and to support non-standard odd-spaced headers.
  • Great for Arduino breadboard kit projects,Portable design, easy and safe to use.
  • In the terminals have not damaged it can be reused, if damaged can also be used for soldering.
Check Stock

SunFounder 2560 R3 Project Super Starter Kit with 2560 Controller Board and R3 Controller Board

  • For Arduino kits and Affordable Price - This is a complete Kit with more than 200pcs components for adults, students and beginners.. Includes 2560 controller board and USB cable, 100% compatible with Arduino Mega 2560 R3 Mega328 Nano for Arduino kit..
  • Detailed Instructions - This 2560 Kit with detailed pdf tutorial in the CD, you can learn to code and program faster and easier with all the components..
  • 25 Projects Provided - As an upgraded starter kit compatible with arduino 2560 controller board, more than 20 interesting lessons are included. Allowing for a dynamic creative learning experience..
  • Compatible with Arduino- R3 board compatible with Arduino,use ATMEGA16U2 chip, Faster transfer rates and more memory..
  • Control using r3 ATmega328P chip, Includes new pin configuration (SCL, SDA, IOREF) Clearly print on the female header connector, more precise and easier to use the wire..
Check Stock

Complete Ultimate STEM Electronic Projects Starter Kit for Arduino with Mega2560 LCD1602 Servo Stepper Motor Sensors Breadboard Jumper Wire Resistor Capacitor Transistor and Tutorial

  • This is an upgrade complete Arduino starter kit designed for beginners and electronic hobbyists..
  • With more than 33 projects, it is esay and convenient for you to learn Arduino and programming. If you need the guide of the projects, just email us after you getting the mega2560 starter kit...
  • The starter kit will make a great gift for any to-be engineers, or anyone looking to get a jump start in the world of microcontrollers and programming. Hundreds of tutorials and guides can be found online and the range of projects that can be created with an Arduino is vast.
  • This kit comes with everything that the average beginner Arduino project requires, plus more, 50 kinds of different electronic components, more than 180 components, such as Arduino Mega2560, 1602 LCD display are included. It has enough variety to learn most of what can be done with the arduino and electronics in general.
  • The kit is a great help for you learning electronics! Lots of little bits to start doing Arduino things.
Check Stock

SunFounder Ethernet Shield W5100 Compatible with Arduino UNO R3 Mega 2560 1280 A057

  • With this Ethernet Shield, Compatible with Arduino board can be used to connect to internet..
  • Directly plug puzzle board, no soldering required..
  • It is directly compatible with Arduino official Ethernet Library..
  • It adds a micro-SD card slot, which can be used to store files for serving over the network..
Check Stock

MakerFocus ESP32 Development Board Upgraded Version 8MB Flash & 4pcs 3.7V 2000mAh Lithium Rechargable Battery 1S 3C Lipo Battery

  • Add battery power detection circuit. Use ADC2_4 (GPIO 13) to read battery voltage, Please get the example link from the product description below.
  • [This is an upgraded version WiFi Kit 32! ] What's the Upgrade of New WiFi Kit 32? 1. 4MB (32M-bits) FLASH upgrade to 8MB (64M-bits) FLASH.
  • [Note]: This ESP32 development board comes unassembled, soldering of headers is required.
  • Note - The maximum operating current of this 3.7v 2000mAh lipo battery is only about 1.5A, can not be used for unmanned aerial vehicles, model....
  • Application - This 1S 2000mAh lipo batteries can be used for esp32 arduino development board whose plug is 1.25mm. Dimension - 50 * 34 * 10 mm /1.96 *....
Check Stock

SunFounder Mega 2560 R3 ATmega2560-16AU Board Bundled with R3 Board and Ethernet Shield W5100 for Arduino

  • ...d control using r3 ATmega328P chip. Includes new pin configuration (SCL, SDA, IOREF).Clearly print on the female header connector, more precise and easier to use the wire..
  • With this Ethernet Shield, for Arduino board can be used to connect to internet. Can be used as server or client. Directly plug puzzle board, no soldering required. It is directly compatible with Arduino official Ethernet Library. It adds a micro-SD card slot, which can be used to store files for serving over the network..
Check Stock

KEYESTUDIO Multi-Purpose Shield V1 with Buzzer LED Temp Light IR Receiver for Arduino Controller R3 and MEGA2560

  • 【2 in 1 Robot Kit and Electronics Kit】-This tank robot car kit is compatible with Arduino and Mixly ((block programming platform) , ideal for Arduino beginners and professionals to learn robotics, electronics and programming.Teenagers or adults can learn coding from Scratch to Arduino after assembly and get a lot of fun of making..
  • 【Automatically Drive/Motion Control】-Keyestudio robot kit has many excellent functions, detecting, avoiding and following obstacles.
  • using 8X16 LED panel to display the movement status. You can also use infrared remote control and Bluetooth APP to control it (support iOS and Android).Have fun in the process of learning Arduino..
  • 【Simple Assembly】-With a detailed tutorial for assembling it,and all parts are named and organization. Four cartoon animal heads have been added to the kit so that you can install them on the ultrasound module,assemble with your child, it will be a wonderful experience!.
  • 【Project-Based Tutorials for Coding】-This programmable robot supports Arduino IDE.15 detailed online projects, from simple to complex,easy to learn coding, robotics and electronics through games. Stimulate your creativity through hands-on experience..
  • 【KEYESTUDIO Technical Support】About this ....
Check Stock

SunFounder 3 in 1 IoT/Smart Car/Learning Ultimate Starter Kit Compatible with Arduino IDE, Scratch, Online Tutorials, 192 Items, 87 Projects, Including Controller Board Compatible with Arduino UNO

  • 【3 in 1 Kit】This is the most comprehensive kit for learning Arduino, Smart Car, and IoT. 3 in 1 Kit comes with 87 projects and 192 items. (Includes ESP8266 and controller board compatible with Arduino UNO.).
  • 【Learning Kit】The SunFounder 3 in 1 Ultimate Starter Kit is compatible with both Arduino IDE and Scratch, making it suitable for both beginners and experienced software engineers..
  • 【Smart Car】With this kit, you can learn how to build and program a multi-functional smart car. It includes features such as Line Tracking, Obstacle Avoidance, Remote Control and so on..
  • 【Learn Internet of Things】You can learn how to design code and build IoT products with ESP8266, such as plant monitoring, door and window detection, etc..
  • 【Online Tutorials】The online tutorials contains 87 projects: 39 projects for learning Arduino, 11 car projects, 8 IoT projects, and 29 Scratch projects..
Check Stock