Best Arduino Gsm Shield 4g

2Pack 9V Battery Clip Connector Cable with Holder Box for Arduino UNO R3 Mega 2560 Power Module 6F22 6LR61 mn1604 pp3 Baterries

Standard 5.5x2.1mm Center Positive Barrel Jack DC Male Plug. Cable length: Approx. 20cm (7.8 inch)..
Widely Used for Arduino Uno, Arduino Due, Arduino Mega 2560, Arduino Ethernet Shield, development boards, evaluation boards, breadboard, Arduino DIY, DSO 138 OscillOscope kit, XR2206 function generator and the device which need the 9V battery..
Easy install & Save work: This cable come with a 9V battery holder and 3 screw fixing hole on the base, convenient for fixing.
With this snap cable, you can saves the work of soldering a battery snap to a DC coax plug. Don't always have to take apart/open some test equipment just to change the battery inside..
! ! ! Not fit for Arduino Nano, Effect pedals..
Any quality issues, please feel free to contact us..

The mega 2560 R3 Board is 100% compatible with Arduino. Powered via the USB connection or with an external power supply. The power source is selected automatically..
The ATmega2560-16au has 256 KB of flash memory for storing code (of which 8 KB is used for the bootloader), 8 KB of SRAM and 4 KB of EEPROM (which can be read and written with the EEPROM library)..
The mega 2560 comes preburned with a bootloader that allows you to upload new code to it without the use of an external hardware programmer. It communicates using the original STK500 protocol (reference, C header files).This version is optimized in the original version, both to ensure consistent and compatible with the original, but also easy to use..
With this Ethernet Shield, for Arduino board can be used to connect to internet. It can be used as server or client. Directly plug puzzle board, no soldering required..
This Ethernet Shield is directly compatible with Arduino official Ethernet Library. It adds a micro-SD card slot, which can be used to store files for serving over the network..

Widely Used for Arduino Uno, Arduino Due, Arduino Mega 2560, Arduino Ethernet Shield, development boards, evaluation boards, breadboard, Arduino DIY, DSO 138 OscillOscope kit, XR2206 function generator and the device which need the 9V battery..
Easy install & Save work: This cable come with a 9V battery holder and 3 screw fixing hole on the base, convenient for fixing.
With this snap cable, you can saves the work of soldering a battery snap to a DC coax plug. Don't always have to take apart/open some test equipment just to change the battery inside..
Standard 5.5x2.1mm Center Positive Barrel Jack DC Male Plug. Cable length: Approx. 20cm (7.8 inch)..
Not fit for Arduino Nano, Effect pedals..
Any quality issues, please feel free to contact US..

Made of high quality materials. Lightweight and easy to carry..
Designed with spring clips for easy battery installation and removal..
EASY TO INSTALL AND SAVE WORK: The cable comes with a 9V battery holder and 3 screw fixing holes on the base for easy fixation.
With this snap cable you can save yourself the work of soldering the battery snap to the DC coax plug.
Widely used in Arduino Uno, Arduino Due, Arduino Mega 2560, Arduino Ethernet Shield, Development Boards, Evaluation Boards, Breadboards, Arduino DIY,....

Terminal Block Breakout Shield Module - for Arduino UNO R3. the item has been soldered and assembled..
Terminal block pitch 3.5mm/0.138", wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper..
Standard IDC40 pitch 0.1" header, you can use 40pin FRC(flat ribbon cable) connector cable connect all Arduino Uno pins to peripheral equipment..
With power on LED indicating. red reset button on the side. with a ICSP adapter connect header. FR-4 fiber glass PCB, dual copper layers..
NOTE: the item not include Arduino Uno module..

Works with any of the Arduino MKR boards: Zero, WiFi, LoRa, Sigfox, GSM, NBIoT, and Vidor..
Easily connect up to 14 Seeed Studio’s Grove modules to your MKR board..
Ideal for fast projects: plug several modules and go! No soldering required..
Screw terminals to safely connect the carrier board to a power source..
Connect sensors and actuators to the Arduino IoT Cloud and control them remotely!.

LTE / 4G & GSM /3G: Broadband design for 4G / LTE and 3G / GSM systems: 4G networks GSM is 3G wireless (Global System for Mobile Communication) US domestic LTE: 700 MHz band: AT&T Mobility, Verizon. Global LTE: 2600 MHz band (2.6GHz) GSM bands 824-894 and 1850.2 – 1909.8 (US and Latin America / Mexico).
900MHz ISM Band. Can also be made to operate on other VHF and UHF frequencies within the ISM frequency bands. Non Line of Sight (NLOS): 900 MHz band is best for passing through trees and forests..
IoT wireless & M2M: Compatible with many machine to machine communication applications, remote monitoring, and telemetry applications using LTE-m, 4G / LTE, 3G / GSM, LoRa. (Compatible because it is vertically polarized)..
iMax frequency bands 2300 MHz / 2500 MHz / 2600 MHz (2.3GHz, 2.5GHz, 2.6GHz).
This omni directional antenna’s range of frequency band compatibility in the 700 MHz to 2700 MHz frequency band range, its low broadband VSWR, and impedance matching to 50 Ohm gear, makes it suitable and compliant for all the above applications..

5″ FHD, TFT, IPS (1920 x1080 pixels), Kyocera Sapphire Shield touchscreen / 64GB ROM – 4GB RAM – Expendable Micro SD up to 512GB.
SDM630 Qualcomm Snapdragon processor with 2.2GHz x 1.8GHz, Octa Core CPU.
Super Wide View 1080p HD Action Camera with 135-degree field of view for capturing wider angle shots. Underwater Mode, Continuous Shooting, Panorama, Scene Select, Auto Scene Detect, Color Effects, Slow Motion, Time Lapse. Live full capture and playback.
Android 8 (Oreo) / USB Type-C and Qi Wireless / Battery 3240mAh non-removable Li-ion.

5" FHD, TFT, IPS (1920 x1080 pixels), Kyocera Sapphire Shield touchscreen / 64GB ROM - 4GB RAM - Expendable Micro SD up to 512GB.
SDM630 Qualcomm Snapdragon processor with 2.2GHz x 1.8GHz, Octa Core CPU.
Super Wide View 1080p HD Action Camera with 135-degree field of view for capturing wider angle shots. Underwater Mode, Continuous Shooting, Panorama, Scene Select, Auto Scene Detect, Color Effects, Slow Motion, Time Lapse. Live full capture and playback.
Android 8 (Oreo) / USB Type-C and Qi Wireless / Battery 3240mAh non-removable Li-ion.