Best Arc Flash

National Safety Apparel Class 00 Red Rubber Voltage Insulating Glove Premium Kit with FR Knit Glove and Leather Protectors, Max. Use Voltage 500V AC/ 750V DC (KITGC0011RAG)

  • KIT INCLUDES: Pair of Class 00 Rubber Voltage Insulating Gloves.
  • Pair of 10" Leather Protectors for gloves.
  • TESTED: Each pair of rubber voltage insulating gloves has a maximum use voltage of 500V AC/ 750V DC and is newly tested and stamped with test date.
  • Rubber Voltage Insulating Gloves should be worn with leather protectors.
  • COMPLIANT - Rubber Voltage Gloves are NFPA 70E-2015 compliant for arc flash.
  • CSA Z462-15 compliant for arc flash (Canada).
  • ENHANCED PROTECTION - Ideal for arc flash & general FR applications.
  • ADDED COMFORT & PROTECTION - ArcGuard 12 Cal FR Knit Gloves can be worn with Rubber Voltage Gloves as a liner for added protection & comfort..
Check Stock

International Enviroguard Disposable Polypropylene Coveralls (Blue) (Case Of 25) (L, Elastic Wrist, Hood & Boots)

  • MATERIAL & CONSTRUCTION: Flame Resistant 88% Cotton / 12% Nylon blended twill fabric. Fabric weight is 7 oz / sq yd. Fabric complies to ASTM F1506 for Arc Flash and NFPA 2112 (ASTM F1930) for Flash Fire. Arc Flash rating (ATPV) is 12 cal / cm2 and complies with HRC 2 rating. Garment is NFPA 2112 / HRC 2 compliant and UL CERTIFIED. Fabric is mercerized and designed to provide minimal shrinkage, maximum comfort and optimum safety & durability.
  • DESIGN & SIZING: Full sleeve with cuffs. Heavy duty 2 way YKK Brass FR zipper. Action back pleats. Pockets: 2 breast pockets, with flaps and snap closure. 2 quarter cut swing front pockets. 2 patch hip pockets. Utility pocket on right thigh. Pen / cell phone pocket on left upper arm. Side vents for inner access. Pen slot on left breast pocket. Elastic on each side of waist for better fit. One 4” hammer loop. Manufactured to US Standard Size Charts. Refer to Size Chart Image..
  • COMPLIANCE: NFPA 2112 (ASTM F 1930) Compliant for Flash Fire. ASTM F1506 (D6413 + F1959) Compliant for Arc Flash. HRC 2 (ATPV of 12 cal / cm2). UL Certified (check labels for UL Stamp). All our NFPA 2112 / HRC 2 garments are identified by 3 point labeling system..
  • WASH / CARE INSTRUCTIONS. FR cotton based fabrics must be well cared to extend ....
Check Stock

National Safety Apparel Class 0 Black Rubber Voltage Insulating Glove Premium Kit with FR Knit Glove and Leather Protectors, Max. Use Voltage 1,000V AC/ 1,500V DC (KITGC009AG)

  • KIT INCLUDES: Pair of Class 0 Rubber Voltage Insulating Gloves.
  • Pair of 10" Leather Protectors for gloves.
  • TESTED: Each pair of rubber voltage insulating gloves has a maximum use voltage of 1,000V AC/ 1,500V DC and is newly tested and stamped with test date.
  • Rubber Voltage Insulating Gloves should be worn with leather protectors.
  • COMPLIANT - Rubber Voltage Gloves are NFPA 70E-2015 compliant for arc flash.
  • CSA Z462-15 compliant for arc flash (Canada).
  • ENHANCED PROTECTION - Ideal for arc flash & general FR applications.
  • ADDED COMFORT & PROTECTION - ArcGuard 12 Cal FR Knit Gloves can be worn with Rubber Voltage Gloves as a liner for added protection & comfort..
Check Stock

National Safety Apparel Class 0 Black Rubber Voltage Insulating Glove Premium Kit with FR Knit Glove and Leather Protectors, Max. Use Voltage 1,000V AC/ 1,500V DC (KITGC010AG)

  • KIT INCLUDES: Pair of Class 0 Rubber Voltage Insulating Gloves.
  • Pair of 10" Leather Protectors for gloves.
  • TESTED: Each pair of rubber voltage insulating gloves has a maximum use voltage of 1,000V AC/ 1,500V DC and is newly tested and stamped with test date.
  • Rubber Voltage Insulating Gloves should be worn with leather protectors.
  • COMPLIANT - Rubber Voltage Gloves are NFPA 70E-2015 compliant for arc flash.
  • CSA Z462-15 compliant for arc flash (Canada).
  • ENHANCED PROTECTION - Ideal for arc flash & general FR applications.
  • ADDED COMFORT & PROTECTION - ArcGuard 12 Cal FR Knit Gloves can be worn with Rubber Voltage Gloves as a liner for added protection & comfort..
Check Stock

Flame Resistant FR High Visibility Hi Vis 88% C/12% N Pant/Trouser. (44W x 34L, Khaki)

  • MATERIAL & CONSTRUCTION: Flame Resistant 88%C/12% twill Fabric. Fabric Weight 9 oz / sq yd. Fabric complies to ASTM F1506 for Arc Flash and NFPA 2112 (ASTM F1930) for Flash Fire. Arc Flash rating (ATPV) is 17 Cal / cm2 and complies with HRC 2 rating. Garment is NFPA 2112 / HRC 2 compliant and UL CERTIFIED. 2” FR reflective tape is ANSI/ISEA 107 compliant. Fabric is mercerized and designed to provide minimal shrinkage, maximum comfort and optimum safety and durability.
  • DESIGN & SIZING: Heavy duty Nomex tape FR Brass zipper. Classic regular fit to provide a work friendly cut and a classic look. Proprietary “Flex fit” hidden elastic in waist to provide comfort flexible fit. 2” High Visibility FR Reflective tape (ANSI / ISEA 107) Two quarter cut front pockets and two back pockets Manufactured to US Standard Size Charts. Refer to Size Chart Image..
  • COMPLIANCE: NFPA 2112 (ASTM F 1930) Compliant for Flash Fire. ASTM F1506 (D6413 + F1959) Compliant for Arc Flash. HRC 2 (ATPV of 17 Cal / cm2). UL Certified (check labels for UL Stamp). All our NFPA 2112 / HRC 2 garments are identified by 3 point labeling system.
  • WASH / CARE INSTRUCTIONS. FR cotton based fabrics must be well cared to extend life and minimize shrinkage. Follow Wash and Care instructions pro....
Check Stock

Flame Resistant FR High Visibility Hi Vis Coverall - 88% C/12% N (Medium, Khaki)

  • MATERIAL & CONSTRUCTION: Flame Resistant 88% Cotton / 12% Nylon twill fabric. Fabric wt. is 7 oz. Fabric complies with ASTM F1506 for Arc Flash and NFPA 2112 (ASTM F1930) for Flash Fire. Arc Flash rating (ATPV) is 12 cal / cm2 and complies to HRC 2 rating. Garment is NFPA 2112 / HRC 2 compliant and UL CERTIFIED. 2” FR reflective tape is ANSI / ISEA 107 compliant. Fabric is mercerized and designed to provide minimal shrinkage, maximum comfort and optimum safety and durability..
  • DESIGN & SIZING: Full sleeve. Heavy duty 2 way YKK Brass FR zipper. Action back pleats. 2” High Visibility FR Reflective tape (ANSI / ISEA 107) Pockets: 2 breast pockets, with flaps and snap closure. 2 quarter cut swing front pockets. 2 patch hip pockets. Utility pocket on right thigh. Pen / cell phone pocket on left arm. Side vents. Pen slot on left breast pocket. Elastic on sides for better fit. One 4” hammer loop. Manufactured to US Standard Size Charts. Refer to Size Chart Image..
  • COMPLIANCE: NFPA 2112 (ASTM F 1930) Compliant for Flash Fire. ASTM F1506 (D6413 + F1959) Compliant for Arc Flash. HRC 2 (ATPV of 12 cal / cm2). ANSI / ISEA 107 Class 3 Compliant UL Certified (check ....
Check Stock

KONRECO FR Shirts for Men 7oz Flame Resistant Long Sleeve Henley 2 Pockets Grey Welding T-Shirt

  • STYLE:Idea from baseball shirts and add 2 pockets for work. Arc bottoms looks fasionable and long enough front and back provide more protection when you work! Big and tall size fits everyone(if too long easy tuked in your pants).
  • FR Performence:Flame Resistant 100% Knitted Cotton Mid-weight fabric. Fabric weight is 7.1 oz / sq yd. Fabric complies with ASTM F1506 for Arc Flash and NFPA 2112 (ASTM F1930) for Flash Fire. Minimum Arc Flash rating (ATPV) is 8.2cal / cm sq. and complies with HRC 2 rating. Garment is NFPA 2112 / HRC 2 compliant and UL CERTIFIED..
  • Soft AND Comfortable: We did some soft treatment on this cotton knit fabric and we did prewash for the shirts,so it will be very comfortable and also no shrunk after wash when you got them!.
  • FITTING – Loose fit design ( long length) Great arm mobility and clothes length allows you to have excellent range of motion without your shirt coming untucked and exposing your front and back area.Also these size are good for tall guys too !.
  • MULTI-USE:Made For Welders, Fitters, Ironworkers, Electricians, And Other Industrial Workers Even At Home. It Can Be Used For Any Kind Of Industrial And Construction works. Our Workwear Pretect You Everyday And Help You Doing Heavy Works..
Check Stock

Flame Resistant FR High Visibility Hi Vis Coverall - 88% C/12% N (Medium, Navy Blue)

  • MATERIAL & CONSTRUCTION: Flame Resistant 88% Cotton / 12% Nylon twill fabric. Fabric wt. is 7 oz. Fabric complies with ASTM F1506 for Arc Flash and NFPA 2112 (ASTM F1930) for Flash Fire. Minimum Arc Flash rating (ATPV) is 8 cal / cm sq. and complies to HRC 2 rating. Garment is NFPA 2112 / HRC 2 compliant and UL CERTIFIED. 2” FR reflective tape is ANSI / ISEA 107 compliant. Fabric is mercerized and designed to provide minimal shrinkage, maximum comfort and optimum safety and durability..
  • DESIGN & SIZING: Full sleeve. Heavy duty 2 way Brass FR zipper. Action back pleats. 2” High Visibility FR Reflective tape (ANSI / ISEA 107) Pockets: 2 breast pockets, with flaps and snap closure. 2 quarter cut swing front pockets. 2 patch hip pockets. Utility pocket on right thigh. Pen / cell phone pocket on left arm. Side vents. Pen slot on left breast pocket. Elastic on sides for better fit. One 4” hammer loop. Manufactured to US Standard Size Charts. Refer to Size Chart Image..
  • COMPLIANCE: NFPA 2112 (ASTM F 1930) Compliant for Flash Fire. ASTM F1506 (D6413 + F1959) Compliant for Arc Flash. HRC 2 (ATPV of 8.0 cal / cm sq or above). ANSI / ISEA 107 Class 3 Compliant UL Certified (check labels for UL Stamp). All our NFPA 2112 / HRC 2 garments are identified by 3 p....
Check Stock

JMU Hazmat Suits Disposable Full Body Protective PPE Coveralls Suit Heavy Duty Chemical Protection Overalls with Hood, Large

  • Ul certified to nfpa 2112 standard for protection from flash fire.
  • Nfpa 70E Cat2 compliant for protection from arc flash with an arc rating of 9.5 cable/cm² (atpv).
  • Extremely lightweight 6.5 oz. 88 percent cotton/ 12 percent nylon fabric offers comfort and breathability.
  • garment will hold shape and color after repeated launderings.
Check Stock