Best Anvil For Knife Making

4PCS Blacksmith Anvil Hardy Tool Set 1 inch - Creasing Stake Tool, Hot Cut Tool, Bottom Fuller &Turning Bending Scrolling Fork

  • 【APPLICATION】-- This Blacksmith Anvil Forge Hardy Tool Set fits in a 1 inch Hardy hole in a anvil or can be used in a vise.Square shanks fit the square hole in the anvil and prevent rotation..
  • 【Turning Bending Scrolling Fork】This is a really handy tool for making S hooks or other basic turning/scrolling shapes. This tool allows you to get leverage for bending metal by hand, with a hammer, or with a bending wrench..
  • 【Bottom Fuller Tool】Bottom fuller hardy tools are used in the anvil or clamped in a vise to form metal. Use a hammer to work from the top, while the hardy tool works from the bottom. This gives you different anvil surfaces and edges to work with..
  • 【Creasing Stake Tool】Two piece of bar stock weld it together on a stand. This is used for doing creases in metal. You can put the metal on the tool and use a chisel to drop the metal down into the slot..
  • 【Hot Cut Tool】This plate stands straight up with a Hand Forged, hardened and Sharpened edge along the top. To place orange/red hot steel over edge and strike with hammer. Cuts through hot steel pretty quick..
Check Stock

Blacksmith Tongs Tools Set & Handmade Blacksmiths’ Hammer Assembled Bladesmith Blacksmith Forge, Knife Making Tongs Includes V Bit Tongs, Flat Jaw Tongs, Wolf Jaw Tongs & Blade Tongs (5 Pieces)

  • 【Flat Tongs】-- Flat Tongs For 1/4 inch flat stock. The jaws of the pliers have a smooth surface that will not scratch the workpiece. Making the tongs lighter and easier to handle when working with smaller stock sizes..
  • 【Blade Tongs】-- For flat stock sizes from 1/8'' to 3/8 '' thick and up to 1 3/4'' wide. Allowing easy transitions from forge to anvil. Designed for Knife-smiths these tongs will allow you to grip the knife in various positions when drawing out the blade..
  • 【V Bit Tongs】-- Used to hold both 5/8'' square and round stock. Designed with a deep V Grove to ensure that your buttstock remains deadlocked while being able to withstand heavy hammering. Extremely versatile tongs..
  • 【Wolf Jaw Tongs】-- Offering a superior grip for holding a variety of stock sizes including Flat, Square and Round stock. Extended head length that has multiple grip points to help support all types of forging and metalwork..
  • 【Blacksmiths’ Hammer】-- Cross-peen hammer desiged with one round face and one wedge-peen face for double use, has comfo....
Check Stock

YPG A14 Adjustable Limit Snap Gage with 4 Plain Cylindrical Pins, 9\-10\ Measuring Range

  • A fully stabilized cast iron frame forms the base of the 'U' type adjustable limit snap gage.
  • The one piece, knife edge, rectangular anvil and the two knife edge, adjustable anvils are all manufactured from hardened, lapped, tool steel.
  • The blades of the type 'U' make its primary use that of gauging the lower diameter of external grooves.
  • Standard blade measures 3/32" width by 3/16" depth.
Check Stock

YPG U2X Adjustable Limit Snap Gage for Measuring External Grooves, 0\-1/4\ Measuring Range

  • A fully stabilized cast iron frame forms the base of the 'U' type adjustable limit snap gage.
  • The one piece, knife edge, rectangular anvil and the two knife edge, adjustable anvils are all manufactured from hardened, lapped, tool steel.
  • The blades of the type 'U' make its primary use that of gauging the lower diameter of external grooves.
  • Standard blade measures 3/32" width by 3/16" depth.
Check Stock

YPG C4 Adjustable Limit Snap Gage with Hardened Steel Anvils, 1-1/4\-1-1/2\ Measuring Range

  • A fully stabilized cast iron frame forms the base of the 'U' type adjustable limit snap gage.
  • The one piece, knife edge, rectangular anvil and the two knife edge, adjustable anvils are all manufactured from hardened, lapped, tool steel.
  • The blades of the type 'U' make its primary use that of gauging the lower diameter of external grooves.
  • Standard blade measures 3/32" width by 3/16" depth.
Check Stock

YPG C5X Adjustable Limit Snap Gage with Hardened Steel Anvils, 2\-2-1/4\ Measuring Range

  • A fully stabilized cast iron frame forms the base of the 'U' type adjustable limit snap gage.
  • The one piece, knife edge, rectangular anvil and the two knife edge, adjustable anvils are all manufactured from hardened, lapped, tool steel.
  • The blades of the type 'U' make its primary use that of gauging the lower diameter of external grooves.
  • Standard blade measures 3/32" width by 3/16" depth.
Check Stock

Channellock 358 8-Inch End Cutting Plier,Blue

  • Laser heat-treated cutting edges last longer.
  • Only CHANNELLOCK uses a knife and anvil style cutting edge to ensure perfect mating and superior cutting edge life.
  • CHANNELLOCK uses high-carbon steel for superior performance on the job and specially coated for ultimate rust prevention.
Check Stock

Channellock - 8 Diag. Plier Lap Joint (338CB)

  • CHANNELOCK's knife and anvil style cutting edge ensures perfect mating and superior cutting edge life.
  • Laser heat-treated cutting edges last longer.
  • High-carbon C1080 steel for superior performance on the job and specially coated for ultimate rust prevention.
Check Stock

Channellock 348 8-1/2-Inch Linesman Plier

  • Laser heat-treated cutting edges last longer.
  • CHANNELOCK's knife and anvil style cutting edge ensures perfect mating and superior cutting edge life.
  • High-carbon C1080 steel for superior performance on the job and electronic coating for ultimate rust prevention.
  • Crosshatch pattern on jaws grips work tightly.
Check Stock