Best Angle Screw Type

Zeetain 8\/20cm Dual Speedlite Camera Mount Tripod Bracket Flash Extension Bar,8\ Dual Tripod Bracket for Camera,LED Video Light,DSLR Camera,Flash Light

  • Universal E Type Flash cold shoe bracket, Swivel light stand mount with Umbrella holder..
  • Universal metal cold shoe mount on top to mount your flash onto bracket.Work on monitor,ring light,Nikon Canon speedlite flash,trigger,magic arm,mic and any accessories that has a camera type of shoe..
  • A hole with locking screw in middle specially designed for holding umbrella..
  • Easy Adjustment. This Flash bracket is with 180° vertical and 360° horizontal adjustment to allow to position the umbrella and flash in different angle..
  • Comes with 1/4 inch to 3/8 inch screw adapter to attach it to a tripod or light stand or any camera rigs that with 1/4"-20 or 3/8"-16 male thread. Package includes 2 pcs of Flash Light Stand Bracket.
Check Stock

Nikon AF-P DX NIKKOR 10-20mm f/4.5-5.6G VR Lens

  • Ultra-wide-angle view that surpasses any Kit Lens and lets you get creative with Composition.
  • Compact, lightweight, durable design that's great for travel and outings.Angle of view:109 degree to 70 degree.
  • Outstanding Optics deliver beautiful photos and videos, even in challenging situations. Minimum focus distance - 0.22 meter ( 0.8 feet) from focal plane at all zoom positions.
  • Near-silent autofocus stepping motor is ideal for recording video. Compatible format(s) DX.
  • Vibration reduction (VR) image stabilization keeps handheld photos and videos sharp and helps with Low-light shooting.Accepts Filter Type:Screw-on.
Check Stock

Black Bolt Gauge SAE Metric Check a Thread Size FastenerLine 901303

  • 29° ACME Thread Gauge-The 29 degree stainless steel acme thread gauge is a single piece type and it is applied to measure thread and external thread tooth pitch.The acme thread gauge range:1-10TPI,the pitch:1,1-1/3,1-1/2,1-3/4,2,2-1/2,3,4,5,6,7,8,9,10.
  • Suitable for-Standard gauge for check the angle of screw cutting tools,check the width of screw cutting tools and set the position of screw cutting tools.
  • Material of stainless steel-This acme thread gauge is made by stainless steel.Not easy to rust and not easy to bend.You needn’t to use anti-rust oil or take any anti-rust ways.Just put the 29 degree acme thread gauge in a dry place and it won’t rust.
  • Clear scales-All the scales on the acme screw gauge are laser engraving,not painting and the acme thread gauge is not the copy of laser engraving. Don’t worry about the long friction will make the scale unclear.
  • Quality after-sale Service- If you are experiencing quality issues or any problems when you receive this acme thread gauge, please feel free to contact our customer service in time and let us know the issue. We offer further solution for you to your satisfaction.
Check Stock

Garmin 360 Mount Base Kit for Virb X & XE

  • Mount your VIRB X or XE at any angle. Includes 3 flat mounts, 3 curved mounts, pivoting mount adapter pieces, long screw and wrench..
Check Stock

VEVOR Hydraulic Rebar Bender, 1700W, Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

  • Ultra-Fast Working Speed: This rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. It can also cut rebar within 5-6 seconds. Bending Angle: 0-180°. Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46..
  • 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)..
  • Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
  • Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy t....
Check Stock

VEVOR Hydraulic Rebar Bender 1700 Wattage Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

  • Ultra-Fast Working Speed: This rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. It can also cut rebar within 5-6 seconds. Bending Angle: 0-180°. Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46..
  • 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)..
  • Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
  • Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy t....
Check Stock

1 Pcs Led Light Bulb LED28MSW-ACDC 0.50 Watt T3 1/4 Midget Flanged Base Bulb | #AA70RK

  • You Purchasing 1 Pcs Led Light Bulb LED28MSW-ACDC 0.50 Watt T3 1/4 Midget Flanged Base Bulb.
  • Voltage: 24-28V, Current: 20mA, Wattage: 0.50W, Type: T3 1/4 LED.
  • Light Output: 1000 mcd, Base Type: E10 (miniature screw base), Life Hours: 100,000.
  • Dimensions: 26mm Length x 9mm Diameter, Viewing Angle: 160 Degree, Color Emitted: White.
Check Stock

Anwenk Camera Flash Speedlite Mount Swivel Light Stand Bracket with Umbrella Reflector Holder for Camera DSLR Nikon Canon Pentax Olympus and Other DSLR Flashes Studio Light LED Light, 1Pack

  • Universal E Type Flash cold shoe bracket, Swivel light stand mount with Umbrella holder..
  • Universal metal cold shoe mount on top to mount your flash onto bracket.Work on monitor,ring light,Nikon Canon speedlite flash,trigger,magic arm,mic and any accessories that has a camera type of shoe..
  • A hole with locking screw in middle specially designed for holding umbrella..
  • Easy Adjustment. This Flash bracket is with 180° vertical and 360° horizontal adjustment to allow to position the umbrella and flash in different angle..
  • Comes with 1/4 inch to 3/8 inch screw adapter to attach it to a tripod or light stand or any camera rigs that with 1/4"-20 or 3/8"-16 male thread. Note: This flash bracket is not ideal for sony minolta godox shoe system..
Check Stock

Professional Knife Sharpening Guide Random Knife Sharpener Angle Guide Sharpening Guide for Whetstone Black 2 Pack

  • 【MULTIPURPOSE】：The mini pocket fixture is very suitable for DIY household projects or professional and general commercial purposes. Must have....
  • 【DOUBLE POCKET】： Dual Pocket 15°Drill Angle, 2-way hole, can realize precise screw connection, and embed screws to realize invisibility. Allows....
  • 【3 SIZES DRILL BITS】：Easily convert between pairs of 6/8/10mm drill drive adapters to adapt to any wood type, position and angle. It fits well....
  • 【CONVENIENT TO USE】：Drill inclined holes quickly and easily to hide screws in wooden furniture. Minimum size-can hold one hand, DIY woodworking....
  • 【KIT】：Pocket hole jig comes with pocket hole jig, 3 sizes drill (6/8/10mm) ,3 sizes stoppers (6/8/10mm), 3 sizes sleeves(6/8/10mm).Work with A F....
Check Stock