Best Anchor Bolt U bolt

TORCH 8.5\ Square Extended U Bolts Extra Long 2.5\ wide 9/16\ Ubolt w Hardware

FITS: Many applications. Please message us with your make/model and current U bolt size if you have any questions about fitment..
CONTENTS: 4x Square U-Bolts (measurements are from inside the bend 8.5" long and 2.5" wide).
INSTALLATION: Bolt on kit. U bolts are 8.5" from the inside bend and just over 9" in overall length..
Ships Same/Next Business Day. 2-4 Day Delivery. Lifetime Warranty. Dedicated Customer Service. Call or message us with any questions!.
NOTES: Please measure your existing U bolts before purchasing to ensure these U bolts are correct for your application. Please message us if you have any questions..

Check Stock

Rural365 Farm Gate Anchor Cane Bolt 18in - Farming Livestock Spring-Loaded Fence Gate Drop Rod Cattle Gate for Tube Gate

[Keep Your Cattle Secure]: The Rural365 Livestock Gate Anchor is designed to prevent your livestock from escaping as well as support your round tube....
[Built to Last]: Fence gate anchor rod holder constructed of stainless steel.
Gate drop rod will stand firm in rain, sleet, and snow to hold your gate....
[Easy to Install]: To install tube gate stop, place U-shaped attachments along the bottom of your gate, then screw on red base.
[Easy to Use]: Drop pin rod features wedged tip to break into the ground.
Lift curved handle to raise drop pin so you can move your gate.
[Package Contents]: Cane bolt tube gate stop package includes 2 U-shaped attachments, 1 red base, 1 attached spring, 2 screws.

Check Stock

DANCO Brass Closet Bolts with Nuts and Washers Toilet Bolt Set, 1/4 inch x 2-1/4 inch, Brass, 12-Set (80156)

Universal Toilet Bolt Caps: Including 8 back toilet bolt caps, 8 covers and 8 washers. Perfect for worn-out toilet bolt covers, or conceal any unsightly, protruding or rusted toilet floor bolts..
Easy to Use: Our toilet bolt screw covers are easy to install with snap-on inserts, only need some simple household tools to complete the Installation, These decorative toilet bolt covers have a white palette to blend in with your toilet seat for a refined look..
Universal size: These toilet bolt caps are 1.4" high, 0.84" width, the hole is 0.52" * 0.32".
that fit a wide variety of toilet seat brands, can fit and cover different size toilets bolts..
Sturdy & Durable: Made of strong plastic, durable and reliable, easy cleaning and maintaining, can be used a long time..
Useful Design: The toilet anchor bolt cover is round with a decorative design. Don't worry about the toilet bolt cover falling off. This is an economical and effective solution to cover the sometimes rusty or dangerous toilet floor bolts..

Check Stock

5/16\ Expansion Shield Anchor Double Zinc Alloy Pk 25

ANCHOR IS MADE FROM RUST RESISTANT MATERIAL-Can be used in areas where moisture is present if the bolt used is rust resistant.
BOLT EXPANDS ANCHOR-No setting tool required.
WORKS IN MOST MASONRY MATERIAL-Versatile for wide range of applications.
LAG SCREWS MUST BE USED-Easy to find many lengths and diameters.

Check Stock

Elephant Anchors [50 Sets+ Drill Bit] - TV mounting Bolts for TV Mount into Drywall & TV Mount into Metal Studs Dual Use Drywall Anchors When no Studs or anchoring into Metal Studs

DUAL USE : NO STUD OR METAL STUD : Mount your TV anywhere, Use when no studs align to the tv mount holes or when mounting on metal stud walls. Best anchors for mounting TV with Tilt or Fixed TV Mounts. Mount up to 90lbs TVs. 50 anchors, screws , washer and drill bit are included..
A Revolution in Mounting - Our drywall anchors can be pre-installed without using a bolt and don't fall behind the wall when the bolt is removed. The Elephant anchor provides a secure hold from within various hollow materials 3/8" to 3" thick including drywall, MDF, sheetrock, plasterboard, sheet rock, gypsum board, buster board, and custard board..
Heavy Duty Mounting - Perfect for TV mounting and hanging curtain rods, lamps, photo frames, coat racks, flat panel TVs, lighting fixtures, hand rails, grab bars, ADA hardware, shelves, cabinets, barn doors, solar panels, garage doors, sinks, brackets, a shower door, and so much more!.
Quality Construction for Quality Construction - Each anchor consists of a corrosion-resistant zinc-plated metal channel.
plastic straps attached to the channel that position it into place.
and a plastic flange that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material..

Check Stock

TOGGLER SNAPTOGGLE BDS Toggle Anchor 304 Stainless Steel Channel Made in US,3/8 to 2-1/2 Grip Range For 1/2 -13 UNC Fastener Size Pack of 25

Toggle anchor installs behind 3/8"- to 2-1/2"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material.
Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes.
Made in USA, and works with 1/2"-13 UNC-threaded metal bolts (sold separately).
Ultimate tensile strength is 275 lb. in 1/2" drywall with a 1/2"-13 UNC bolt, and 2,038 lb. (material failure) in concrete block with a 1/2"-13 UNC hardened bolt.
Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).

Check Stock

QUALIHOME Spring Toggle Bolt Assortments Kit - Toggle Drywall Anchors Kit for Hanging Items w/Hollow Walls & Ceilings - 1/8” x 2” 3/16” x 3’’ 1/4” x 3 Sheetrock Anchor for Frames Shelves & More

Sturdy Toggle Bolts: Need to hang something heavy on the wall? Spring toggle bolt anchors are what you need! Toggle bolts for drywall As they can support twice as much load in a smaller hole than regular wing anchors, our toggle bolts are the most reliable anchors for plaster, concrete, hollow, drywall, & more.
Heavy-Duty Steel Material: Our wall anchors are made of high-quality steel, This sheetrock anchor offers strength, durability, and good resistance to rust and corrosion and great option for picture hanging anchors. Unlike plastic, our steel anchor bolts won't crack when tightened, can support heavier weights, and will retain their stability.
Spring Wing Design: The plaster wall anchor’s two-piece fastening system consists of a strong screw and a foldable spring wing toggle. With the wings that open inside the wall, the weight of the fastened object is evenly distributed across a large surface, making wall anchors for shelves a reliable choice for securing heavy items to walls..
Easy To Install: Installing the heavy-duty wall anchors is a breeze! We have included DIY instructions for easily installing sheetrock anchors.
no special skills are required. To install, first make a hole using a screwdriver/drill, insert the toggle bolt through ....

Check Stock

Qualward Hitch Tightener Anti-Rattle Clamp, Heavy Duty Steel Stabilizer for 1.25 and 2 inch Hitches 304 Stainless Steel Towing Hitch Mounts,Anti-Rust Double Coating Protective

... Great ideal for hitches on trucks, suv's, vans, RV's and trailers. Easily installs with Class I, II, III or IV (1, 2, 3 or 4) hitches that measure either 1.25" and 2" (will not work on 2.5" or larger hitch)..
Upgraded Material: Made from solid steel, it is a pretty good quality tightener with upgraded extra-thick U-bolt and plate. It is designed to reduce noise and keep things locked tight for however far you have to travel even in tough weather conditions. You can expect this to be really tough right out of the gate..
Package including: A heavy duty 304 stainless steel U-bolt and thick powder coated plate will never rust, spring lock washers and flat washers help to tightening it in place and secure..
Easy Installation: First and foremost, you are going to need the following tools: ¾” socket or wrench, U-bolt, tightener plate, washers, lock rings, and nuts. Then，drop the U-Bolt over the stinger and position the tightener plate onto the U-Bolt. Next, place the nuts and hand tighten the washers. At last, finish with the wrench..

Check Stock

Defender Security U 9961 4-Inch Surface Bolt, Solid Brass, Polished Brass Finish

VERSATILE SURFACE LOCK – The U 9961 Surface Bolt can be mounted vertically or horizontally and is effective for keeping doors, cabinets and closets closed, deterring kids and pets from getting in or out from certain areas of your home, and so much more..
GREAT FOR CHILD PROOFING – The surface bolt lock is a great alternative to traditional products to baby and child proof your home. It can be installed out of the reach of inquisitive toddlers and adds a level of security to many areas of your home. Great for pet-proofing too!.
EASY INSTALLATION – Installation is quick and easy! The surface bolt includes a surface mount keeper and a mortise-style keeper to accommodate a variety of applications..
DURABLE CONSTRUCTION – The surface bolt lock is constructed from solid brass with an attractive polished brass finish. It is built to last..
PRODUCT INFO – The U 9961 Surface Bolt is 4” in length and includes two different keepers for surface or mortise installations..

Check Stock