Best Analog Channel

AllAboutAdapters 4-Channel HD-TVI HD-CVI AHD RCA Quad Video to HDMI VGA Converter Switcher with Picture-in-Picture Support

Supreme 4-channel HD/SD video mixer solution designed for multiple camera or DVR video feeds to be displayed on one screen. Each one of the 4 BNC inputs can accept either HD-TVI, AHD, HD-CVI type HD input or analog BNC/RCA composite video from camera or DVR.
Provides simultaneous HDMI output, VGA output and 2 BNC/RCA analog video outputs. Doubles as a 4 in 1 out HD-TVI HD-CVI AHD BNC RCA to HDMI VGA converter switcher..
Able to accept mix of HD-TVI, HD-CVI, AHD and analog BNC/RCA video inputs from camera, DVR and other compatible inputs at the same time. Combine all or selected input video feeds into different styles of split-screen views on one display for preview, live monitoring or video recording..
Selectable HDMI video outputs at 720p/50Hz, 720p/60Hz, 1080p/50Hz, 1080p/60Hz, 1280x720 pixels and 1980x1080 pixels. Selectable VGA video outputs at 1024x768, 1280x1024 and 1440x900 pixels..
Easy IR remote control and individual manual push buttons for easy and fast switching between video inputs. Supports total 8 screen modes including: 4-channel quad screen mode 4-channel split screen with overlay of 3 sub video channels onto the main channel screen 3-channel split screen mode 2-channel screen in horizontal split fashion 2-channel scr....

Check Stock

SOUTHSKY Audio Converter, Stereo Analog to Digital Converter Adapter, 3.5mm Aux Jack R/L 2 RCA Cinch to SPDIF,Toslink, Optical,Coaxial Converter

【Stereo analog to digital audio converter】 Convert analog stereo signals from 3.5mm aux jack or R / L 2 cinch input connections to digital SPDIF, Toslink, optical, coaxial output connections. Warning, this adapter only supports analog to digital, not digital to analog, not bidirectional.
【Connection interfaces with LED Indicator】 Metal housing, input: 1x3.5mm aux jack, 2xRCA R / L, left and right stereo analog channel.
Output: 1xSPDIF (Toslink, optical), 1xCoaxial.
【High sampling rate of L / PCM】 Support sampling rate 32,44,1,48 and 96 kHz, R / L channel of S / PDIF is 24 bit, electromagnetic noise-free transmission. Note: Supports output of uncompressed 2-channel digital audio signals only. Not compatible with Dolby 5.1 or 7.1 or DTS.
【Wide range of applications】 Supports switching the audio interface from HDTV, PC, laptop, computer, DVD player to your audio devices such as AV receivers, amplifiers, active speakers, soundbar..
【Scope of delivery】 1x analog-to-digital audio converter, 1x USB power cable, 1x fiber optic cable, 1x 3.5 mm to 2 cinch cables ， 1x user manual.

Check Stock

Parasound NewClassic 200 Integrated Amplifier

Integrated amplifier with built-in DAC and MM phono stage.
Class D amplifier stage designed by renowned Danish company Pascal.
110 watts-per-channel RMS at 8 ohms, 110 watts-per-channel RMS at 4 ohms.
Phono input for MM or MC cartridges, Pure analog signal path for all analog inputs.
Analog bass management includes 12 dB/octave high-pass crossover, adjustable 20 Hz-140 Hz.

Check Stock

MOTU UltraLite-mk5 USB Audio Interface

18 x 22 USB audio interface – 2 combo XLR/TRS mic/line/hi-Z guitar inputs, 6 analog ins, 10 analog outs, headphone out, S/PDIF digital I/O and 8-channel optical I/O for 40 simultaneous audio channels..
Superb analog quality with ultra-low latency – Analog outputs deliver 125 dB dynamic range. Optimized drivers deliver rock-solid performance and industry-leading low latency..
DSP-driven monitor mixing – Mix live inputs to any analog output pair. Create a separate, unique mix for each output pair (six separate mix busses). Include computer channels in each mix..
On-board effects – Apply reverb, 4-channel parametric EQ and dynamics processing to inputs and bus mixes..
Universal connectivity – Connects to any computer with hi-speed USB 2.0 (audio class compliant, compatible with USB 3.0 and iOS). Compatible with all audio software..

Check Stock

HiFiMeDIY TINY USB DAC Digital to Analog Audio Converter ES9023+PCM2706

Great digital to analog audio decoder solution for transcoding uncompressed digital LPCM 7.1 or 5.1 channel sound into analog surround format for existing analog amplifier or receiver. Extract compressed digital Bitstream audio such as Dolby Digital, AC3 and DTS 5.1/7.1 embedded in HDMI feed and output through its optical audio output for further decoding by downstream device. Supports uncompressed LPCM 7.1, LPCM 5.1 and LPCM 2 channel in analog output through the multi-channel 3.5 output ports..
Supports compressed audio such as Dolby Digital, AC3, DTS 5.1 and LPCM 2CH through optical audio output. Easy EDID dip switch selection so users can easily control their HDMI source to send the desired digital audio format for decoding or conversion. No HDMI output with TV is required when receiving audio at the analog or optical audio output..
Supports HDMI audio sampling rates up to 192 kHz. Supports optical (S/PDIF) digital audio sampling rates up to 192 kHz. Supports all HDTV resolutions including 480p,576p,720p,1080i,1080p and 4Kx2K. Output resolution follows input..
Fully compliant with HDMI 1.3, HDCP 1.2 and DVI 1.1 standards. Supports high-bit-rate (HBR) audio. Its built-in repeater function helps devices regenerate and equalize the HDMI/DVI output sign....

Check Stock

12Pcs CD74HC4067 16-Channel Analog Digital Multiplexer MUX Breakout Board Module CD74HC4067 CMOS Precise Module Compatible with DIY

CD74HC4067 board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer, use the CD74HC4067 16-channel analog signal switch.
It works with both digital and analog signals (the voltage can’t be higher than VCC), and the connections function in either direction.If you want two-way communications,you can add a second board to route your microcontroller's TX line to 16 device's RX lines. By using multiple boards, you can create similar arrangements for I2C,SPI,etc..
The internal switches are bidirectional, support voltages between ground and VCC, have low “on” resistance and low “off” leakage, and to prevent crosstalk, perform “break-before-make” switching. The board also breaks out the chip’s “enable” pin, which when driven high, will completely disconnect the common pin (all switches “off”)..
To control it, connect 4 digital outputs to the chip’s address select pins (S0-S3), and send it the binary address of the channel you want. This allows you to connect up to 16 sensors to your system using only 5 pins..
Since the mux/demux also works with digital signals, you can use it to pipe TTL level serial data to or from multiple devi....

Check Stock

Digital Optical Coax to Analog Stereo Audio L/R Converter Adapter with Optical Cable RCA Cable

It Converts Coaxial or Toslink Digital Audio .Signals to Analog L/R Audio This Converter Has Many Features That Enable It to Perform in a Superior Manner.
Toslink Digital Audio Signals to Analog L/R Audio Supports Sampling Rate at 32, 44.1, 48 and 96 KHz . 24-bit S/PDIF Incoming bit Stream on Left and Right Channels. This optical digital to analog converter is incompatible with 5.1 Channel Signal such as Dolby AC3, please set the audio output to PCM or LPCM before using this adapter..
Rovides Electromagnetic-noise-free Transmission .Easy to Install and Simple to Operate . Supports Uncompressed 2-channel LPCM or PCM Digital Audio Signal Output.
Provides Electromagnetic-noise-free Transmission(5.1 channel is incompatible, please set the audio output to PCM or LPCM）.
If the first connection doesn't work, check that the correct device is linked, and then try again .Package Included: 1 x Digital to Analog Audio Converter Adapter, 1 x fiber Optical cable(99cm length) , 1 x USB Power Cable 1,XRCA cable, 1XEnglish manual NOTE: (excluding 5V DC power supply) .for any quality problem ,please contact us before review ,we will replace it without returning or you can return back free cost .you have no risk to try and we will provide you the best service !....

Check Stock

AllAboutAdapters Premium HDMI DVI Audio Injector Encoder + HDMI Repeater Function

Replaces the original HDMI audio by filtering out the original audio embedded in HDMI signal and insert a new digital or analog audio from different audio source. Combines DVI video with external audio for a new HDMI output..
Converting analog audio from CD player or portable music player into HDMI feed with no video feeds needed. Encodes analog stereo or multi-channel surround sound into HDMI feed for new HDMI output..
Combines DVI video with analog or digital audio for HDMI output further distribution. Real-time audio encoding with original sonic quality retained. No lags and no loss..
Encoding optical audio of PCM 2CH, Dolby 5.1 and DTS 2CH/5.1 type input to HDMI audio for output. Encoding analog stereo from its 3.5mm input or RCA L/R input (via adapter) to HDMI for output..
Easy dip switch design for users to choose input audio channel between HDMI, Optical or RCA L/R before encoding. Supports HDMI audio sampling rate up to 192 Khz..

Check Stock

20PCS CD4053 CD4053B CD4053BE DIP-16 Analog Multiplexer IC

Process Digital Signals: Because the multiplexer can also process digital signals, you can use it to transfer TTL level serial data to multiple devices through pipe or transfer from multiple devices..
High Level: Drive it to high level, and it will completely disconnect the common pins (all switches are disconnected)..
Scope of Application: It is suitable for digital and analog signals (voltage cannot be higher than VCC) and can be connected in either direction. To control this, please connect the four digital outputs to the address selection pin of the chip (SO-S3) and send it the binary address of the desired channel..
16 Channel Analog Multiplexer: This is a very convenient 16 channel CD74HC4067 analog, digital multiplexer, demultiplexer..
Bidirectional Internal Switch: With a low on resistance and off leakage, and to prevent talk, please turn off the switch first and then on..

Check Stock