Best Amplifier Output

ACEIRMC 2pcs MAX9814 Electret Microphone Amplifier with Auto Gain Control for Arduino

  • 1.The MAX9814 is a high-quality microphone amplifier with automatic gain control (AGC) and low-noise microphone bias. The device features a low-noise preamplifier, variable gain amplifier (VGA), output amplifier, microphone-bias-voltage generator and AGC control circuitry..
  • 2.A trilevel digital input programs the output amplifier gain. An external resistive divider controls the AGC threshold and a single capacitor programs the attack/release times..
  • 3.The low-noise preamplifier has a fixed 12dB gain, while the VGA gain automatically adjusts from 20dB to 0dB, depending on the output voltage and the AGC threshold. The output amplifier offers selectable gains of 8dB, 18dB, and 28dB. With no compression, the cascade of the amplifiers results in an overall gain of 40dB, 50dB, or 60dB..
  • 4.The MAX9814 is available in the space-saving, 14-pin TDFN package. This device is specified over the -40°C to +85°C extended temperature range. MAX9814: Simplified Block Diagram MAX9814: Simplified Block Diagram Enlarge+.
  • 5.A trilevel digital input programs the ratio of attack-to-release time. The hold time of the AGC is fixed at 30ms. The low-noise microphone-bias-voltage generator can bias most electret microphones..
Check Stock

Rockville RPA6000USB 19' 1000w 4 Chan DJ/Pro/Karaoke Amplifier/Mixer Amp w/ USB

  • Rockville RPA60BT 19" 1000 Watt 2-Channel USB and Bluetooth Karaoke Receiver/Amplifier/Mixer..
  • 19" rack mountable (removable rack brackets) digital hybrid amplifier/receiver. RMS Power @ 4 Ohms: 125w x 2. Peak Power @ 4 Ohms: 500w x 2..
  • RMS Power @ 8 Ohms: 100w x 2. Peak Power @ 8 Ohms: 400w x 2. THD: > 0.1%. Input Sensitivity: 400mv/33 KOhm. Frequency Response: 20 Hz - 20 kHz. Signal to Noise Ratio: 80 dB..
  • Tone Characteristic: 100Hz-10KHz ±12dB. 110v/220v Switchable. Front Inputs: 3.5MM front aux input, 1/4” Headphone Jack, (2) 1/4" Mic Inputs, USB Input, Optical. Rear Inputs: RCA, Optical, Coaxial. Rear Outputs: Preamp output for an external additional amplifier or powered speaker..
  • Sub preamp output to connect a powered subwoofer or an amplifier. Record output to mixer. Record output to connect a recording device. Bluetooth Capable. Rear Speaker Terminals: Banana plug / binding post outputs for 4 speakers (2 on Channel A and 2 on Channel B).
Check Stock

Monoprice 602520 Microphone Stand with Boom

  • ...150 Hz. Gain and frequency knobs on the control panel allow you to adjust the crossover filter and the power output for the optimum blend and balance of bass output with your stereo or surround speakers..
  • The subwoofer has multiple input options, which allow it to be used with any existing stereo or 5.1 (or greater) amplifier system. For each input there is a corresponding output..
  • High-level inputs accept a full-range signal from the amplifier's stereo speaker outputs. When connecting the unit as part of a 5.1 system, these would be taken off the Front Left and Front Right outputs in parallel to the standard pair of front speakers. The subwoofer provides its own power and includes impedance matching circuitry, so this will not reduce the power output to the front speakers or affect the overall impedance load on the amplifier..
  • Additionally, the subwoofer has a set of right/left Line Level inputs. If using a standard stereo system, without a special subwoofer output, you can connect these to the left and right line level outputs on the amp. The subwoofer will then combine the signals to process the mono bass signal it needs to drive the speaker. If you are using an amplifier with a single mono subwoofer line level output, simply use an RCA "Y" cable to ....
Check Stock

Audiolab 6000A 100-watt Stereo Integrated Amp/Bluetooth DAC - Black

  • Dared MP-5BT is a most popular tube amplifier, sales over 100 thousand units, top player in hi-fi vacuum tube amplifier industry, It is a favorite of music buffs for the past 20 years, with a number of patented technologies, with amazing sound and amazing appearance, it is a work of art!.
  • This vacuum tube amplifier adopts hand welding and with highest quality components and materials to ensure the true reality of the sound quality, The amplifier hybrid preamp section and class AB power amp section. The tubes deliver warm and subtle music to the preamp section, while the solid state components increases the efficiency and quality of the music..
  • 25 watts per channel output, power can drive most home stereo speakers, Support bluetooth wireless for android, iPhone, tablets, smartphones, other streaming devices (supports APTX), support direct line-in, friendly USB and Aux input, when you plug it in via DAC/USB. Speaker output, pre output and 3.5mm headphone personal listening output..
  • Vacuum tube amplifiers in that the glass vaccum tube section is on the exterior. The chassis is made of finest stainless steel and plated with a high quality rose gold finish, flanked by two 1 inch thick wood panels with a lacquered black piano finish. which looks great in any ....
Check Stock

PAC AOEM-CHR3 System Interface Kit to Add or Replace An Amplifier in Select 2007-up Chrysler, Dodge and Jeep Vehicles with an Infinity System,BLACK

  • Adapter used to to add-on after-market amplifier in Chrysler, Dodge and Jeep vehicles.
  • Not compatible with vehicles that have a factory amplified system.
  • 4-channel interface allows for the output to be adjusted to the requirements of the new amplifier.
  • Adapter used to to add-on after-market amplifier in Chrysler vehicles equipped without a premium sound system.
Check Stock

Universal Car Amplifier Bass Knob Control Via RCA RCA Audio Interconnect LC-1

  • This remote amplifier level control adds sub-woofer level controls or balances a multiple amplifier installation.
  • Fine tunes the volume of any RCA line level signal you wish to control.
  • Connect the RCA from the output of this controller to the amplifier, and wire the car stereo output to the RCA input of this unit.
  • Dash mount amplifier level control for Volume Adjustment.
  • Can adjust the amplifier gain while driving.
  • Perfect for balancing the system to change music styles.
  • Simple in and out connections, no additional wiring needed.
Check Stock

AIYIMA T10 Tube Preamplifier with Bluetooth and AIYIMA A07 TPA3255 Power Amplifier 300w+300W Class D Amp Bundle

  • The Aiyima T10 is a Vacuum Digital tube preamp for your home stereo system, The effect of the T10 vacuum tube preamp is warm and soft sound quality. Can match with our A07 Power Amplifier, it not only makes the sound sound soft and sweet, but also experiences the Hifi effect of the class D amplifier.
  • The T10 Tube preamp output to the powered speaker, A07 amplifier & passive speaker.
  • A07 Power Amplifier is a 2 Channel Power Amplifier,with 3.5mm AUX output to next active device can made a 2.1 channel audio system,the Max Power Output 300W+300W(Need choose big power adapter),Use TPA3255 Amp Chip.
  • More technical support and help,pls ask me:www.amazon.com/hz/help/contact/A3BG62S1F23IH5#.
Check Stock

Mini Bluetooth Home Audio Stereo Amplifier Receiver, 2×80W 2.1 Channel Digital Class D Integrated Amp for Home Speakers with DAC 24-Bit 192KHz Optical Coaxial AUX Headphone Line Out Jack

  • Excellent Performance: 80W+80W 2.1 channels allow our amplifier to output higher quality sound. Our mini bluetooth amplifier has a built-in professional-grade 24-Bit 192Khz DAC to ensure the sound has perfect fidelity. The line out interface can also help the amplifier to connect powered subwoofer and powered speakers..
  • Bluetooth 5.1 Core: The built-in Bluetooth 5.1 chip of the amplifier can bring you faster audio data transmission speed. In addition, it provides you with a longer Bluetooth connection distance while ensuring that you can connect to the power amplifier stably..
  • Optical&Coaxial Interface: Amplifier is equipped with the most popular coaxial and optical interface. The coaxial interface can effectively improve the fidelity of audio data. The optical fiber interface has the fastest audio data transmission speed, and the transmission distance is long and stable..
  • Treble&Bass Control: The treble and bass knobs of the amplifier are controlled by a separate professional treble and bass chip. (Bass adjustment range: +-14dB Treble adjustment range: +-8dB), Aluminum alloy material and non-slip design ensure smooth use of the knob..
  • Professional Line Out&Headphone Output: Amplifier has a built-in professional amplifier headphone chip that can drive 16....
Check Stock

Fifine Headphone Amplifier 4 Channels Metal Stereo Audio Amplifier,Mini Earphone Splitter with Power Adapter-4x Quarter Inch Balanced TRS Headphones Output and TRS Audio Input for Sound Mixer-N6

  • 【Share A Single Stereo Source】Amplifier 4 channel with separate volume knob for each of up to four outputs: No audio crackle, minimal distortion at highest volumes. No loss of signal when all four headphones are connected. Headphone amplifier 4 channel would be excellent for up to four people monitoring the mix for tracking, live uses and listen to the TV with earbuds while working out..
  • 【Fantastic Stereo Audio Quality】Mini stereo amplifier with 4X 1/4'' Stereo Headphone TRS Output Connector Jacks, 1/4'' TRS Source Input Connector Jack. ◆Stereo ◆: You must use the 1/4” TRS stereo audio cable male to male connectors for input and output connection. ◆Mono◆: 1/4” TS male to male connectors for input and output connection. ■■TRS/TS cable is not included in package■■.
  • 【Compact and Portable】Solid metal build construction headphone splitter, tight connections, smoothly operating knobs. Quality components and exceptionally rugged construction ensure long life. Ultra-compact headphone distribution amplifier for studio and stage applications..
  • 【Used for Applications】Features a durable and compact design headset amplifier perfect for both on-stage and in-studio performances or application that requires multiple headphone connect....
Check Stock