Best Aluminum Tapes

LLPT Aluminum Black Foil Tape Matt None Reflective Heavy Duty 3.94 Mil 2 Inch x 33 Feet High Thermal Conductive Adhesive Hot Cold Air Duct Tape for Metal Repair Pipe(NC233)

  • INTRODUCTION: LLPT matt aluminum foil tape is constructed with 3 layers. The top is nano carbon material which is uniformly painted on aluminum foil and will not get rid of the black layer in cold or hot, weatherproof, long lasting painting to anti scratch-off, converts heat energy into infrared-radio frequency by high thermal radiation efficiency of carbon atom to transfer heat dissipation efficiency.
  • the middle layer is aluminum foil and the 3rd layer is pressure sensitive acrylic adhesive..
  • PRODUCT FEATURE: High thermal conductivity(w/m-k 400-2500), thermal radiation (1000-6000) and flexibility.
  • Supreme performance on resistance of flame, vapor, moisture, ultraviolet (UV), weather, cold, heat, oil, smoke and etc with acrylic coated adhesive. LLPT Nano Carbon Aluminum Foil stays high stability and strength for long life support, great efficiency on cooling and heating with operational temperature from -30°C to 260°C. Works 10 times better than traditional graphite sheet..
  • APPLICATION: Industrial grade, efficient thermal conduction for HVAC systems, AC units, heaters, vents, metal finishing, electronics, automotive, aerospace, recreational vehicle, construction, industrial/home air duct, kitchen masking to avoid oil in gap, sealing, seaming, heat sh....
Check Stock

LLPT Double Sided Woodworking Tape 2 Pack 1/2 Inch x 36 Yards Each Roll Double Face Turner Tape for CNC and Wood Template Routing Edge Banding Removable Strong Adhesive (WT065)

  • ...ne based adhesive with yellow backing, super easy to apply and remove without chipping off wood surfaces, optimal thickness is good for resisting curling, breaking and tangling. Wide range working temperature and excellent high temperature resistance..
  • MATERIALS: LLPT woodworking tape is suitable to be used on wood, aluminum, steel, plastic resins and other smooth surfaces.
  • LLPT CNC woodworking tape has optimal thickness and width after colleting feedbacks from hundreds of professional woodworker.
  • tough balancing, minimized bonding gap, firmly holding and easy releasing. Its intended purpose is to fasten templates/jig to wood, plastic, aluminum and steel for marking and cutting..
  • EASY USE AND REMOVAL: The yellow paper backing is easy to peel off by finger nail, the application will be done easily and nicely. LLPT tape would not leave any headache behind or damage surfaces for neat DIY woodworking projects upon your removal. The silicone adhesive is coated, LLPT would not suggest leaving the tape on templates for more than 72 hours which might cause very high bonding and leave gummy white upon removal..
  • LLPT-TAPES: LLPT produces various tapes for industrial & commercial use with ideal sizes & thickness based on the desires of users. LLPT is dedicated to ....
Check Stock

1PCS Premium Silver Aluminum Tape Foil Tape 2 x65 Feet,3.9mil Metal Tapes with Adhesive Backing for Ductwork Heavy Duty Duct Tape for Heat Insulation HVAC Dryer Vents Wrap Pipe Repair Ducting

  • 【Wide Applications】Aluminum tape with adhesive backing is suitable for sealing, repairs and patching HVAC air duct system, wrap pipes insulation, waterproof sealing aluminum, sealing hot and cold air ducts, dryer vents, heavy duty ducts tapes, stainless steel and plastic joints/joints, temporary repair of metal surfaces, fixing hose and copper pipe, etc. Aluminum foil tape is suitable for smooth flat and irregular surfaces..
  • 【Strong Adhesion】Our metal tape with adhesive backing is made of high quality pressure sensitive adhesives. So, this aluminum foil tape has stronger sticking, easier tearing, leave no trace without residual glue. This metal insulation tape is very fit for kitchen with heat resistant, moisture resistant, and waterproof. Provide you with excellent adhesion and stability under low and high temperature conditions (long-term temperature resistance: 120℃, short-term temperature resistance: 350℃)..
  • 【3.9mil Thickness Aluminum Foil Tape】If the metal aluminum foil tape is too thin, the HVAC air duct tape will break easily, and if insulation tape is too thick, the heavy duty tape will be difficult to fit the pipe surface wrapping. The aluminum tape of 3.9mil thickness is moderate and perfect for use. So our 3.9mil foil tape is....
Check Stock

Mitchell Abrasives 57 Flat Abrasive Tape, Aluminum Oxide 150 Grit 1/8\ Wide x 25 Feet

  • Our tapes sand and clean hard to reach areas where your standard tools will not fit.
  • Firm enough so they won't tear or fray and will hold up in all types of applications.
  • Aluminum Oxide-tough, long life abrasive, ideal on ferrous containing, high tensile material.
  • Ideal on metal, plastic, wood, or virtually any surface, fits in slots, grooves and small holes.
  • Cords and Tapes are fully coated on all sides for more complete and effective coverage.
Check Stock

Mitchell Abrasives 01 Flat Abrasive Tape, Aluminum Oxide 180 Grit 1/16\ Wide x 25 Feet

  • Our tapes sand and clean hard to reach areas where your standard tools will not fit.
  • Firm enough so they won't tear or fray and will hold up in all types of applications.
  • Aluminum Oxide-tough, long life abrasive, ideal on ferrous containing, high tensile material.
  • Ideal on metal, plastic, wood, or virtually any surface, fits in slots, grooves and small holes.
  • Cords and Tapes are fully coated on all sides for more complete and effective coverage.
Check Stock

Router Template/CNC Double Sided MOUNTING Masking Tape 1" X 36YDS

  • ...apply and remove without chipping off wood surfaces, optimal thickness is good for resisting curling, breaking and tangling. Wide range working temperature and excellent high temperature resistance..
  • MATERIALS AND SIZE: LLPT woodworking tape is suitable to be used on wood, aluminum, steel, plastic resins and other smooth surfaces.
  • LLPT CNC woodworking tape has optimal thickness and width after colleting feedbacks from hundreds of professional woodworker.
  • tough balancing, minimized bonding gap, firmly holding and easy releasing. Its intended purpose is to fasten templates/jig to wood, plastic, aluminum and steel for marking and cutting..
  • EASY USE AND REMOVAL: The yellow paper backing is easy to peel off by finger nail, the application will be done easily and nicely. LLPT tape would not leave any headache behind or damage surfaces for neat DIY woodworking projects upon your removal. The silicone adhesive is coated, LLPT would not suggest leaving the tape on templates for more than 72 hours which might cause very high bonding and leave gummy white upon removal..
  • LLPT-TAPES: LLPT produces various tapes for industrial & comm....
Check Stock

Jam Bases 100-250 (Backing Tracks)

  • Material:High quality Steel spring,Aluminum handle.
  • Ergonomic Knurling Design, Solid Aluminum/Sponge Handle For a Non-Slip Grip and Super Comfortable To Hold..
  • Rust-Proof Coated Spring in 6 Different Resistance Level From 100lbs to 350lbs for All Levels of Users..
  • Two pieces Non-slip tapes(in random color) send as a gift.
Check Stock

Mitchell Abrasives 58-S Flat Abrasive Tape, Silicon Carbide 150 Grit 3/16\ Wide x 50 Feet

  • Our tapes sand and clean hard to reach areas where your standard tools will not fit.
  • Firm enough so they won't tear or fray and will hold up in all types of applications.
  • Silicon Carbide-hard and sharp abrasive, ideal on non-ferrous materials such as aluminum, brass, titanium, as well as plastic and wood.
  • Ideal on metal, plastic, wood, or virtually any surface, fits in slots, grooves and small holes.
  • Cords and Tapes are fully coated on all sides for more complete and effective coverage.
Check Stock

Mitchell Abrasives 59-S Flat Abrasive Tape, Silicon Carbide 150 Grit 1/4\ Wide x 50 Feet

  • Our tapes sand and clean hard to reach areas where your standard tools will not fit.
  • Firm enough so they won't tear or fray and will hold up in all types of applications.
  • Silicon Carbide-hard and sharp abrasive, ideal on non-ferrous materials such as aluminum, brass, titanium, as well as plastic and wood.
  • Ideal on metal, plastic, wood, or virtually any surface, fits in slots, grooves and small holes.
  • Cords and Tapes are fully coated on all sides for more complete and effective coverage.
Check Stock