Best Aluminum Nitride Powder

MCAMPAS Universal Silicon Nitride Hot Rod Ignitor.120 Volt Nitride Igniter Replacement For Silicon Carbide Igniters of The Gas-Fired Forced-Air Furnaces, Water Heaters, Boilers

  • 120 volt nitride furnace igniter Replaces hot surface ignitor for gas-fired furnace, boiler, and water heater.
  • How to tell if your igniter is working， if the igniter has continuity your multimeter should read anywhere from 9 to17 Ohms,if there is no reading on the multimeter or very little change, then there is no continuity and you will have to replace the nitride furnace igniter.
  • 1.97" Nitride heating element, 1.18"Ceramic insulator body nonglazed 95% alumina- polished finish, 15-3/4 inch temperature rating 250℃ cable- 20 AWG/ UL 10362 specification.
  • It works compatible with Cook Top, Cook Top and Range, Furnace and Warm Air Movement, Gas Ignition, Hot Surface Igniters, Infrared light source, Pool Heater and Boilers, Process Machinery, Special FX, Water, and Parking Heaters Nitride heating element.
  • Power rating:150 W. Temperature at 120v ± 0.5v .60HZ at 17 sec ≧1180 ℃.This is a very versatile product, very robust with long cycle life. Silicon nitride is extremely rugged and can be handled without fear of breakage or contamination..
Check Stock

IRWIN Drill Bit Set, Titanium Nitride Coated, 29-Piece (3018003)

  • Titanium Nitride Coated-coated nitride drill bits last longer and feature a cutting edge that stays sharp.
  • 135° split-point tip starts drilling immediately and helps eliminate walking.
  • IRWIN drill bits are great for repetitive metal drilling with portable drills and for use in stationary drill presses.
  • Includes 1/16" through 1/2" drill bit sizes in 1/64" increments.
  • Titanium Nitride drill bits last longer and feature a cutting edge that stays sharp.
Check Stock

Traxxas 5862 Big Bore Shock Set Complete with Springs

  • Hard-anodized & PTFE-coated T6 aluminum shock bodies withstand the pressures of your biggest jumps.
  • Titanium-nitride coated shafts offer incredible durability and nearly frictionless operation for ultra-smooth damping.
  • Shocks come fully-assembled with springs and shock oil included.
  • Use Traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles.
Check Stock

GERBER Ayako Folding Knife, Green

  • The Ayako pocket knife is modern take on a classic Japanese designed friction folder EDC.
  • The knife features dual deployment options: a nail nick hole, as well as an extended tang front flip.
  • Full fine edge 3. 5 Inch, Japanese style tanto blade of 7Cr17MoV Stainless Steel with a Titanium Nitride coating for excellent corrosion resistance.
  • Frame Lock for confidence during use, and easy one-hand closing.
  • Handle scales made of textured coined aluminum and stainless steel, with pocket clip to keep it secure in hand or in pocket.
Check Stock

Melin Tool AMG-DP Carbide Drill Mill, AlTiN Monolayer Finish, 30 Deg Point Angle, 2 Flutes, 2\ Overall Length, 0.1875\ Cutting Diameter, 0.1875\ Shank Diameter

  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.
  • Aluminum titanium nitride is similar to TiAlN but with a higher aluminum content for improved hardness and smoothness.
  • Round shanks allow use with a wide variety of toolholding systems.
  • Can be used for drilling, slotting, chamfering, and profile milling.
Check Stock

Riedell UPTOWN 120 BR Mens Rhythm Skates 2009 - Size 5

  • TOP QUALITY CRAFTSMANSHIP - These precision bearings come equipped with hardened Swiss chromium steel alloy balls that can endure long-lasting use..
  • OPTIMIZED DURABILITY - The KwiK Swiss Nitride bearings use a Titanium Nitride coating. This coating does not chip, flake, or degrade during prolonged rough use..
  • CORROSION RESISTANT DESIGN - The KwiK bearings' Titanium Nitride-coated races resist corrosion. They also provide strength and smoothness to create a performance with the greatest roll..
  • FRICTION RESISTANT RETAINERS - These bearings come equipped with friction resistant Delrin retainers that are pre-spun with high-performance oil..
  • SLEEK & LUXURIOUS DESIGN - The 8mm skate bearings come with a metallic gold finish, a design that is worthy of its performance. This product is not a children's product and is not designed or intended for use by children 12 years of age or younger..
Check Stock

Melin Tool AMG-DP1 Carbide Drill Mill, AlTiN Monolayer Finish, 30 Deg Point Angle, 2 Flutes, 2.5\ Overall Length, 0.375\ Cutting Diameter, 0.375\ Shank Diameter

  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.
  • Aluminum titanium nitride is similar to TiAlN but with a higher aluminum content for improved hardness and smoothness.
  • Round shanks allow use with a wide variety of toolholding systems.
  • Can be used for drilling, slotting, chamfering, and profile milling.
Check Stock

Melin Tool - 56245 CCMGS-B Carbide Ball Nose End Mill, AlTiN Monolayer Finish, 30 Deg Helix, 4 Flutes, 1.5000\ Overall Length, 0.1875\ Cutting Diameter, 0.1875\ Shank Diameter

  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.
  • Aluminum titanium nitride is similar to TiAlN but with a higher aluminum content for improved hardness and smoothness.
  • Round shanks allow use with a wide variety of toolholding systems.
  • Use for radius and contouring part surfaces.
  • Designed to cut materials ranging from nickel base alloy, stainless, tough alloys, abrasive and nonferrous.
Check Stock

Ohamtes 2mm Reduced Shank Twist Drill Bits High Speed Steel HSS 4341 for Iron/Copper/Plastic/Aluminum Plates/Metal Materials, Round Shank, Double Edge, 5 Pcs

  • Parameter: Cutting and Shank Dia : 2mm / 0.08", Cutting Edge Length: 25mm / 0.98", Twist Drill Total Length : 49mm / 1.93"..
  • Short Shank Twist Drill Bit Uses: For Stainless Steel/Aluminum Alloy/Iron/Copper/Plastic/Aluminum Plates/Metal Materials etc..
  • How To Use: When in use, The drill bit should be perpendicular to the workpiece and oil, water, or coolant should be added to keep cool..
  • Features: Premium gold titanium and black nitride dual coating, more heat and wear resistant. HSS straight shank tool strong hardness and toughness..
  • Package Content: 5 x Double Flutes Straight Shank Twist Bit..
Check Stock