Best Alloy Machining Parts

Panther Marine 55-2600 Auxiliary Motor Steering Kit - Stainless Steel

Brand New RockJock Jeep TJ/LJ/XJ/MJ/ZJ Currectlync Steering System (Part #CE-9701).
Compatible with: 1997-2006 TJ/LJ Jeep Wranglers, 1984-2001 XJ Cherokee, 1993-1998 ZJ Grand Cherokee, 1985-1992 MJ Comanche.
The RockJock Currectlync heavy duty tie rod and drag link system for TJ, LJ, XJ, MJ and ZJ vehicles features, a 1 1/4″ diameter forged alloy drag link, and 1 1/4″ solid alloy steel tie rod bar that is bored and threaded on the ends. All 7/8″ thread tie rod ends with boots are included as well as the RockJock heavy duty steering stabilizer bracket..
This unit is a direct replacement for the stock parts. No modifications or machining to any part of the vehicle is necessary. This unit is rated at 200% stronger than the stock components..
NOTE: This unit is designed to be used on vehicles with 4″ of lift. It can be used on vehicles with less lift, but the vehicle must have a minimum of a 2″ bump stop (over stock). Also, on vehicles with no lift, 2 of the tie rod ends may need be trimmed to achieve proper adjustment..

【FINE CRAFTAMANSHIP】: With CNC accurate machining, color anode surface treatment, more beautiful and wear‑resistant, small in size, light in weight, well fit for 1/10 RC Car..
【HIGH-GRADE MATERIAL】: Made of high‑quality aluminum alloy, RC Steering Arm is durable and has a longer service life..
【EASY TO USE】: RC Steering Servo Arm is easy to install and disassemble, which is convenient to use and time‑saving..
【NICE REPLACEMENT】: Ideal replacement parts for old or damaged parts to make your model car look like new..
【GUARANTEE】: We strive to provide a better customer experience. In terms of any problem of this product, you can send emails as soon..

【1】Brand: XJL 【2】Name: Nano Ball Nose End Mill 65° 【3】Material: tungsten steel.
Bar: 0.4um granular tungsten steel 【4】Coating layer: NANO.
For high-hard materials and high-speed machining fields, the optimized NANO silicon nitride coating makes the tool have high-temperature stability.
【5】Number Of Flutes：2F,Spiral Angle: 35°Double edge belt + Negative rake Angle design 【6】Applicable cutting materials: Alloy steel, carbon steel, quench and tempering steel die steel HRC 55-65° of high hardness materials. 【7】Suitable for machine: CNC machining center, engraving machine, high-speed machine,dry cutting,etc.
【8】Processing methods: finish machining, semi-finish machining, curved surface machining, arc machining, irregular machining.
【9】Main features:milling cutter for high-hardness and high-speed cutting applications. The edge is coated with NANO-BLUE coating, which can directly perform high-speed rough machining and fine machining on heat-treated materials below 65°, reduce the number of tool changes, advance the productivity of machine tools, save the groove design and grinding method of manufacturing time, and have the advantages of high chip conduction, AG, long service life and high surface finish after machining..

Machining: Copper And Aluminum Medium Finish Machining.
Allows Faster Machining And Leaves Better Finished on Metal Parts, Reduce the Downtime Required to Change Edges and Easily to be Replaced..

1.Using high-quality aluminum alloy CNC machining, strong and durable..
2.Upgrading the vulnerable plastic parts #7532 7552 of the original car to allow the car to obtain better performance..
3.Installed in the fixing holes of the original car, simple and non-destructive installation..
4. Suitable for Traxxas 1/18 LaTrax Teton,Desert Prerunner..

Aluminum alloy material, CNC precision machining, surface anode anti-oxidation treatment..
Panoramic bracket consists of three parts- two quick release plate with graduated disc and a fixed plate.the quick release system could be adjustable for 360° vertically by loosen the upper pivot bearing lock knob. And the bottom base can rotate 360° horizontally.adjust the camera position is more convenient..
The ball head with 4 angles of rotation: 15°, 30°, 45° and 60°, in the horizontal or vertical shooting to 360 degree panoramic shooting..
Dovetail groove at the bottom, can quickly with ball head or clamp for shooting..
PH-720A Panoramic Ball Head With Suitcase，more convenient to carry..

☞ YBG205 is the best choice for finishing on stainless iron parts, can make high-gloss surface. YBG202 has good wear resistance and toughness, suitable for finishing, semi-finishing, high-temperature alloy processing on steel ,stainless steel and carbon steel parts..
☞ Coating: Thick AL2O3 coating extends the life of the inserts working in high temperature. The first choice for steel processing from finishing to rough machining..
☞ Advantage: It has strong resistance to plastic deformation and edge strength.High-hardness processing, stable performance, sturdiness and durability.
☞ Feature: Precision processing, suitable for processing low carbon steel, stainless steel, viscous materials and non-ferrous metals..
☞Package includes: 50PCS APMT160408PDER YBG205 Carbide Milling inserts.

Straight diamond grinding wheel used for machining of conical, cylindrical and flat surface, cylindrical and conical apertures. Machining of cylindrical surfaces parts and surface ends at one set-up. Machining of recesses and slots of carbide stamps. Sharpening and finishing of carbide tools..

* Package includes ：1PCS 300R C10-10-120-1T +1PCS 300R C12-12-130-1T+1PCS 300R C12-13-130-1T+ 6PCS APMT1135PDER + 3PCS T8 wrench. If you need more APMT1135PDER, please search ASIN：B097RG372M..
* High performance replaceable inserts, anti-seismic high-quality alloy steel, can effectively suppress vibration..
* It is suitable for rough machining, finish machining, digging machining, groove machining and cutting machining..
* The screw offset fastening design makes the inserts and groove closely combined, enhances the rigidity, and the processing effect will be better..
* The handle strictly abides by the process of first vacuum quenching and then tapping to avoid the deformation caused by first tapping and then quenching. It is firm and durable and can prolong the service life..