Best Alloy Bar End

MAXPOWER 4-Pieces Pry Bar Set, 12-inch Utility Claw Pry Bar, 8-inch Nail Puller, 10-inch and 7-inch Flat Pry Bar Crowbar Claw

  • 12-inch Utility Pry Bar, double claw with end chisel nail puller, Made of Drop Forged and Heat-treated Alloy Steel, tough and easy to grip,suit for precision nail pulling ( Overall Length 300mm ).
  • 8-inch End Cutting Pliers, Carpenter pincers for easy nail extraction for construction, floor installation etc, Made of High Carbon Steel for durability and prevent rusting. ( Overall Length 200mm ).
  • 7-inch and 10-inch Flat Pry Bar, double claw with end of nail puller ( Overall Length 185mm and 260mm ).
  • Polished, beveled claws allow precision nail pulling and prying.
Check Stock

DURATECH 3-in-1 Plumber wrench & 4 Way Sillcock Key, 2-Pack Tub Drain Remover Wrench, for Bathroom

  • The 3-in-1 Plumber wrench includes a 15/16-inch open end wrench, 9/16-inch open end wrench and an open end 12-point box wrench. Two separate wrenches fit together to form a single tool, providing more options with less to carry..
  • Prepare for any emergency with 4-Way sillcock key holding 1/4''(7.5mm), 9/32''(8mm), 5/16''(10mm), 11/32''(11mm) specifications. The 4-way sillcock key measures 3.11 x 3.11 x 0.66 inches, proper size for you to carry it hands or put it in your bag..
  • Compared with Zinc Alloy, aluminum alloy is much lighter and durable. DURATECH Drain Remover Wrench features ergonomic wrench design to install and remove tub drains without scratching fine finishes.This unique design ensures that even if the wrench accidentally falls on the basin or bathtub, it will not easily scratch the basin or bathtub..
  • The tub drain wrench is designed with dual-side. Larger end of wrench can be applied for kitchen sink baskets, flush valves, or other household plumbing systems.
  • small end of wrench can be applied for bathtub drains, bar strainers, and more.To meet your daily needs..
  • This is a versatile set for many uses and a great addition to your existing collection of tools..
Check Stock

MAXPOWER 2Pcs Pry Bar Set, Heavy Duty Flat Pry Bar 15-inch and Claw Nail Puller 12-inch, Strikable Head and Full Body Drop Forged Crowbar Tools

  • 15 inch Flat bar pry bar, heavy duty design with strikable zone, double claw with end of nail puller, overall length 380mm, weight 750g.
  • 12 inch Cats paw nail puller, beveled claws allow precision nail pulling and prying, end with hammer head face, overall length 300mm, weigth 300g.
  • There is a round protrusion on 12-inch claw pry bar, which allows you to digging in wood around the head of sunken nails to assist removal. Also for other possibilities, like leather punch, paper punch, blacksmiths touch mark etc.
  • Construction of full body drop forged and 20% thicken heat-treated alloy steel, tough and easy to grip, Corrosion-resistant black plated finish.
  • MAXPOWER nail puller and pry bar set, ideal for easy nail extraction for construction, floor installation etc.
Check Stock

Teyssor Mountain Bike Handlebar 31.8mm Aluminium Alloy MTB Handlebars 720mm 780mm

  • Clamp diameter: 31.8mm, Bar end diameter: 22.2mm.
  • Bicycle Handlebar Flat Bar, Ergonomic Design for riders who need more control on the bikes..
  • Ultra-light Durable Material: Aluminum Alloy 6061, strong handlebars compatible with most mountain bikes and dirt bicycles..
Check Stock

YG-1 P15202 Spade Drill Straight Shank Holder, Straight Flute, 0.318\ Shank Diameter, 31/32\-1-3/8\ Drill Insert Range

  • ☞The boring range of the complete set of boring tools: 10-150mm, and the diameter of the boring tool bar is 50mm. Precision fine-tuning: 0.01mm (one revolution of 0.02mm), adjustable stroke 20mm. The boring bar easily and directly enters the boring head hole..
  • ☞The refined boring bar is made of alloy steel, which has strength and toughness, good hardenability, and no obvious temper brittleness. After quenching and tempering, it has obvious impact resistance. The taper design of the bar increases the anti-vibration capability of the boring bar..
Check Stock

ARES 46006-12-Inch Pry Bar - Angled Tip for Lifting and Prying - Comfortable Non-Slip Double Injection Handle

  • SPECIFICATIONS: The ARES Pry Bar features a length of 12 inches, allowing for high-leverage functionality with a convenient size, and is a must-have for any mechanic’s toolbox..
  • QUALITY: This pry bar is constructed of heat treated alloy steel and features a square bar stock that won’t easily flex or twist, providing increased strength. The tool is finished with a black powder coat to further enhance durability and provide additional corrosion resistance, and the double injection handle provides for a sturdy and comfortable non-slip grip even when applying force..
  • APPLICATION: Our Pry Bar features a full tang go-through heavy duty striking cap at the end of its handle, preventing damage to the handle when striking. Designed for use with hammers and other striking tools, the pry bar’s angled tip provides a high-leverage fulcrum for lifting and prying even in tight spaces, with the end cap driving force directly through the shaft..
  • RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES Pry Bar, simply contact customer service for troubleshooting help, parts, replacement, or refund..
  • ASPCA BUSINESS AMBASSADOR: We are proud to be....
Check Stock

Goldfire Motorcycle 7/8'' Handle Bar End Weights Handlebar Grips Cap Anti Vibration Silder Plug Fits for Yamaha Kawasaki Dirt Bike (black)

  • Durable alloy handlebar end cap, Universal fits all motorcycles 7/8'' bar end.
  • Easy installation! These grips are great replacement for your old grips.
  • Works great with most bicycle handlebars, including Road Bikes, Mountain Bikes, Fixies, or other adult bikes.
Check Stock

AUTOTOOLHOME 1/4 inch HSS 4 Flutes End Mills Milling Cutter End Drill Bit Straight Shank Pack of 2

  • HIGH PROCESSING EFFICIENCY: the edge of end mill bits is HARD and SHARP with TIAIN coating, process the heat treatment materials under 32°with high speed, reduce changing times and improve the production efficiency..
  • APPLICATION: end mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
  • CUTTING EDGE DESIGN: the bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
  • STRONG and DURABLE:The end mill bits are made from Ultra-fine tungsten steel bar, with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
Check Stock

Goldfie Motorcycle 7/8'' Handle Bar End Weights Handlebar Grips Cap Anti Vibration Silder Plug for Yamaha Kawasaki honda KTM Dirt Bike (red)

  • Durable alloy handlebar end cap, Universal fits all motorcycles 7/8” bar end.
  • Easy installation! These grips are great replacement for your old grips.
  • Works great with most bicycle handlebars, including Road Bikes, Mountain Bikes, Fixies, or other adult bikes.
Check Stock