Best Alg Rmr Mounts

Red Dot Sight, Tactical RMR 20mm Red Dot Sight 3 MOA Pistol Scope Adjustable Brightness with Glock Mount, Reflex Sight Red Dot Scope

  • 【Wide Applications】: RMR red dot sight comes with 20mm (0.78inch) Picatinny rail mount and a heightening base. It's compatible with pistols and Picatinny rails. Capable of being mounted on a RMR slide cut on a Glock.
  • 【Fit For 20 Mm Picatinny Rails Mount】: Compact Red Dot Sight Kit includes 20mm Picatinny Rail Mounts Bottom Plate and Low Profile Fixed Mount Bottom Plate, please make sure it is suitable for your model before purchasing..
  • 【Easy to Install】: Forged aluminum housing material. The sight lines have been carefully designed to be perfectly combined. Ultra-light, water- and shock-resistant for improved performance in all weather conditions..
  • 【Multi-Coated Lenses】: High-quality, fully multi-coated lenses provide a clean, wide field of vision. Power and spot intensity controls are located on the left side of the sight glass for easy selection of 6 brightness levels..
  • 【Professional after-sales】: Safe and fast. 1 year product warranty, if you need help, please feel free to contact our customer service, 24 hours online professional customer service..
Check Stock

Trijicon AC32064 RMR Mounting Kit For MOS and Springfield OSP Models

  • This kit includes the sealing plate and proper screws needed to mount an RMR on the MOS and Springfield OSP slide.
  • Fits G17 Gen4 MOS, G19 Gen4 MOS, G34 Gen4 MOS , G35 Gen4 MOS, G40 Gen4 MOS, G41 Gen4 MOS, and Springfield OSP.
  • The AC32064 kit includes: RMR Sealing Plate, two RMR Screws (short) and Hex Key.
  • One must have this kit to mount an RMR on a MOS slide - RMRs ship with two long screws which will NOT work.
  • You will need the two short screws in this kit.
Check Stock

Leisure Time 1 qt. Calcium Booster 6 Pack

  • INSTANTLY ELIMINATE ODORS & FUMES: Removes industrial-strength chlorine odors and fumes and leaves air refreshed and neutralized.
  • Use after RMR-86 and RMR-86 PRO Stain Removal, or any other odor causing household cleaners.
  • COMPLETE COVERAGE: Our odor eliminating neutralizer covers up to 300 square feet per gallon.
  • Spray or fog by using this deodorizer in an airless, electric solution, hand sprayer, or ULV cold fogger.
  • VALUE & SAVINGS: Mix our odor eliminator with warm water for a ready-to-use mixture.
  • 2 full scoops makes 1 gallon of solution that can be used to refresh and absorb odors.
  • FAST ACTING AND EASY TO USE: Our quick mix solution can be paired in a 1:1 ratio with RMR-86 and RMR-86 Pro Mold Stain Removal products.
  • Combine with water for instant odor elimination.
  • STOP CORROSION IN ITS TRACKS: Prevent and treat corrosion on chlorine and bleach based cleaning sprayers.
  • After each use, simply run RMR Neutralizer through hose and pump to stop corrosion from occurring.
  • ECO FRIENDLY: Stop harmful bleach and chlorine-based chemicals from absorbing into the soils and harming foliage. Spray soil /foliage before use to prevent chemical absorption, or immediately after to stop further absorption..
Check Stock

Ade Advanced Optics RD3-023 Valkyrie 4 MOA Green Dot Sight for Optics Ready Pistol That is Compatible with RMR fooprint Optics Such as Holosun HS407C/HS507C/HS507T and Riton X3 Tactix PRD.…

  • ADE RD3-023 Valkyrie is a 4 MOA GREEN dot designed to fit any pistol with a PISTOL that is compatible with RMR/SRO, Holosun 407C/507C/508T footprint red dots. The Valkyrie fits all pistol with optic cuts for Trijicon RMR/SRO, including aftermarket slide such as Rockslides, Polymer80 that has a optic cut for Trijicon RMR/SRO..
  • The Valkyrie Gen 2 also fits name brand pistol manufacturer made Optics Ready pistols, such as Glock MOS, S&W M&P 2.0 OP, IWI Masada, Smith Wesson MP C.O.R.E, CZ P10F/10C optics ready, Walther Q5 Match and Springfield XD/XDM/XDS OSP, Canik TP9 SFX/Combat, FN 509/45 Tactical, Shadow Systems MR 920 using pistol manufacturer provided plate marked for Trijicon RMR footprint..
  • Those name brand pistol manufacturer made "Optics Ready" handguns all come with several mounting plates/optic cuts marked for different brands of red dots, such as for Trijicon RMR, Shield RMS and Vortex Venom red dot footprint. The Valkyrie fits one of the pistol manufacturer provided plate marked that is compatible with Trijicon RMR..
  • ADE Valkyrie created a iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a "back up iron sight" to give enough distance to be a Co-Witness back up sig....
Check Stock

Monstrum Micro Red Dot Mount for Mossberg 500/535/590/835/Shockwave Series Shotguns | Compatible with Venom/Viper/Fastfire/Docter Standard Red Dots

  • For direct mounting of micro red dots to Mossberg 500/535/590/835/Shockwave Series shotgun models.
  • Available in either Docter or RMR standard footprint patterns. Refer to compatibility chart to confirm compatibility with your micro red dot..
  • Mounts directly into the factory mounting holes of Mossberg 500/535/590/835/Shockwave Series shotguns with no additional hardware required.
  • Package includes multiple screw sets of different lengths for compatibility between red dot manufacturers. Please use the set screws that match the depth of your red dot mounting holes..
  • All Monstrum mount and accessory products come with a lifetime guarantee.
Check Stock

DPP Titanium Red Dot Mount/Plate/Adapter Compatible with Springfield XD Trijicon RMR/SRO&Holosun 407C/507C/508T

  • This Optic converter/adapter plate is made for any pistol slide that has a trijicon rmr optic cut, or optic plate can ONLY accept a trijicon rmr/sro....
  • Simply attach this adapter plate on the existing trijicon rmr optic cut as a regular optic plate. Screws are provided for over 25 popular red dot....
  • This adapter plate allow user to attach ADE RD3-006, RD3-09, RD3-012, RD3-013, RD3-018, RD3-019, Vortex Venom/Viper, Burris Fastfire 123, Sightmark....
  • Also compatible with Leica Tempus, Sig Romeo, Shield RMS/RMSC, Jpoint red dot sights..
  • Made in USA. This is the ONLY adapter(Made by ADE OPTICS) on the market to convert any pistol optic cut/plate that is with a trijicon rmr footprint,....
Check Stock

Ade Advanced Optics Picatinny Mounting Plate/Adapter/Mount - Compatible with Trijicon RMR ADE Stingray Holosun HS407C/HS507C/HS508T Red Dot Sight…

  • This Optic converter/adapter plate is made for any pistol slide that has a trijicon rmr optic cut, or optic plate can ONLY accept a trijicon rmr/sro....
  • Simply attach this adapter plate on the existing trijicon rmr optic cut as a regular optic plate. Screws are provided for over 25 popular red dot....
  • This adapter plate allow user to attach ADE RD3-006, RD3-09, RD3-012, RD3-013, RD3-018, RD3-019, Vortex Venom/Viper, Burris Fastfire 123, Sightmark....
  • Also compatible with Leica Tempus, Sig Romeo, Shield RMS/RMSC, Jpoint red dot sights..
  • Made in USA. This is the ONLY adapter(Made by ADE OPTICS) on the market to convert any pistol optic cut/plate that is with a trijicon rmr footprint,....
Check Stock

DPP Titanium Red Dot Mount/Plate/Adapter Compatible with Smith & Wesson M&P TrijiconRMR/SRO&Holosun 407C/507C/508T

  • Include 6 custom .390 Length Mounting Screws Compatible with Trijicon RMR Mounting on Glock MOS and most Optics-Ready pistol. Ensure Maximum Thread....
  • Works with direct pistol slide mounting and all other aftermarket pistols/rifle mounts* Some cut slide use #4-40 screws, the screws come with this kit....
  • Greatly reduces the chance of your reflex sight battery losing connection resulting in flickering or temporary loss of your sight's reticle. The Anti....
  • The kit includes 1X regular sealing plate,1X anti-flicker sealing plate, 6X custom .390 Length Screws (short) and 1X Hex Key..
  • Made from 304 stainless steel with Black finish.100% MONEY-BACK warranty within 30 days of purchase*NO QUESTIONS ASKED. LIFETIME WARRANTY.
Check Stock

UTG Super Slim RMR Mount 2 in 1 Combo Picatinny

  • Precision CNC Machined from 6061-T6 Aircraft Grade Aluminum with Weight Reducing Lightening Cuts, and Finished in a Matte Black Anodize.
  • 0.87" Height Mount Positions RMR at the Correct Height for an Absolute Co-witness in line with Standard Height AR Iron Sights.
  • Low Profile 0.40" Height Mount Positions RMR at a Low Enough Height for Most Shotguns and Rifles with Traditional Stocks Not in Line with the Bore.
  • Utilizes Locking Torx Screws and Square-shaped Integral Recoil Stops for a Secure Zero Hold on Any Picatinny Rail.
  • Includes RMR Mounting Screws and Installation Tools for a Simple and Friendly Installation.
Check Stock