Best Air Tank Moisture Separator

SCHULZ REFRIGERATED AIR DRYER FOR AIR COMPRESSOR COMPRESSED AIR SYSTEMS 75 CFM GOOD FOR 15HP & 20HP COMPRESSORS WITH PRE-FILTERS

  • NEW 75 CFM SCHULZ NON-CYCLING REFRIGERATED AIR DRYER WITH INDUSTRIAL RATED WATER SEPARATOR + OIL REMOVING COALESCING FILTER.
  • THIS IS A COMPLETE KIT OF EVERYTHING YOU NEED FOR MOISTURE AND OIL FREE ULTRA DRY AIR (COMPRESSED AIR PIPING NOT INCLUDED).
  • DRYER: 75 CFM @ 100 PSI / 1" FEMALE NPT INLET & OUTLET / DEW POINT: 41 DEGREES / 200 PSI MAX INLET / MAKE SURE YOUR COMPRESSOR OUTPUT IS A MAX OF 175 PSI SO TO NOT DAMAGE THE STAGE 1 & 2 FILTERS.
  • STAGE 1: WATER SEPARATOR RATED FULL INDUSTRIAL / 175 PSI MAX INPUT / 5 MICRON ELEMENT REMOVES 95% OF MOISTURE + INTERNAL FLOAT DRAIN (AUTO DRAIN) 11oz METAL BOWL.
  • STAGE 2: COALESCING FILTER RATED FULL INDUSTRIAL / 175 PSI MAX INPUT / 0.01 MICRON ELEMENT REMOVES 99.98% REMAINING MOISTURE + OIL FROM COMPRESSED AIR LINES ALSO EQUIPPED WITH 11oz METAL BOWL AND INTERNAL FLOAT DRAIN (AUTO DRAIN).
Check Stock

Schulz Refrigerated Air Dryer for Air Compressor Compressed Air Systems 35 cfm Good for 7.5hp & 10hp Compressors with Pre-Filter

  • NEW 35 CFM SCHULZ NON-CYCLING REFRIGERATED AIR DRYER WITH INDUSTRIAL RATED WATER SEPARATOR + OIL REMOVING COALESCING FILTER.
  • THIS IS A COMPLETE KIT OF EVERYTHING YOU NEED FOR MOISTURE AND OIL FREE ULTRA DRY AIR ( COMPRESSED AIR PIPING NOT INCLUDED).
  • DRYER: 35CFM @ 100 PSI / 1/2" FEMALE NPT INLET & OUTLET / DEW POINT: 41 DEGREES / 200 PSI MAX INLET / MAKE SURE YOUR COMPRESSOR OUTPUT IS A MAX OF 175PSI SO TO NOT DAMAGE THE STAGE 1 & 2 FILTERS. IF YOU NEED PRE-FILTER WITH REGULATOR, PLEASE SELECt " REGULATOR PRE-FILTER" OPTION ABOVE.
  • STAGE 1: WATER SEPARATOR RATED FULL INDUSTRIAL / 175 PSI MAX INPUT / 5 MICRON ELEMENT REMOVES 95% OF MOISTURE + INTERNAL FLOAT DRAIN (AUTO DRAIN).
  • STAGE 2: COALESCING FILTER RATED FULL INDUSTRIAL / 175 PSI MAX INPUT / 0.01 MICRON ELEMENT REMOVES ALL REMAINING MOISTURE + OIL FROM COMPRESSED AIR LINES ALSO EQUIPPED WITH METAL BOWL AND AUTO DRAIN.
Check Stock

Schulz Refrigerated Air Dryer for Air Compressor Compressed Air Systems 35 cfm Good for 7.5hp & 10hp Air Compressors with Regulator Pre-Filter

  • NEW 35 CFM SCHULZ NON-CYCLING REFRIGERATED AIR DRYER WITH INDUSTRIAL RATED WATER SEPARATOR/PRESSURE REGULATOR + OIL REMOVING COALESCING FILTER.
  • THIS IS A COMPLETE KIT OF EVERYTHING YOU NEED FOR MOISTURE AND OIL FREE ULTRA DRY AIR ( COMPRESSED AIR PIPING NOT INCLUDED).
  • DRYER: 35CFM @ 100 PSI / 1/2" FEMALE NPT INLET & OUTLET / DEW POINT: 41 DEGREES / 200 PSI MAX INLET / MAKE SURE YOUR COMPRESSOR OUTPUT IS A MAX OF 175 PSI SO TO NOT DAMAGE THE STAGE 1 & 2 FILTERS.
  • STAGE 1: ADJUSTABLE 7 - 175 PSI PRESSURE REGULATOR + GAUGE / WATER SEPARATOR RATED FULL INDUSTRIAL / 175 PSI MAX INPUT / 5 MICRON ELEMENT REMOVES 95% OF MOISTURE + INTERNAL FLOAT DRAIN (AUTO DRAIN).
  • STAGE 2: COALESCING FILTER RATED FULL INDUSTRIAL / 175 PSI MAX INPUT / 0.01 MICRON ELEMENT REMOVES ALL REMAINING MOISTURE + OIL FROM COMPRESSED AIR LINES ALSO EQUIPPED WITH METAL BOWL AND AUTO DRAIN.
Check Stock

LE LEMATEC Air Compressor Dryer, Does Not Restrict Air Flow, Desiccant Filter, 150 PSI (ZN312E-3 3/8″)

  • 3/8″ NPT Air Compressor Desiccant filter. Operating pressure 1-150 PSI at 22 CFM. Compared to other Air Compressor Filters, this filter barely reduces air flow..
  • A Reusable option, this air dryer for compressors reliably removes all contaminants from the air line ensuring clean air to your air tools..
  • The Compressor Air Dryer Features metal housing and connection points to safely secure your air compressor moisture filter to your air line without leaks..
  • Water Separator air compressor filter features Color changing desiccant to notify you when it’s time to change out the desiccant beads..
  • The LE LEMATEC air water separator for air compressors is lightweight yet durable as to not weigh down your airline while adhering to strict shop quality standards..
Check Stock

3/4 Compressed Air Moisture Filter Regulator Oiler Separator Lubricator Combo

  • 3/4" Compressed Air Moisture Filter Regulator Oiler Separator Lubricator Combo.
  • Brand new in line compressed air moisture filter, regulator, lubricator combo. This is a high quality unit that gives you the power to keep moisture out of your air lines, regulate air pressure, and lubricate your air lines all at once!.
  • This has 3/4" female NPT input as well as a 3/4" female NPT output port. This assembly has a 140 CFM max flow rate and comes equipped with a pressure gauge..
  • You can adjust the regulated pressure between 7 - 160 PSI with a 225PSI max PSI. The moisture filter features a 5 micron filter, 2.7 oz bowl capacity, as well as a visual sight glass to easily monitor the moisture level..
Check Stock

SMACO PCP Air Compressor 4500Psi/30Mpa High Pressure Air Compressor Paintball Scuba Tank Compressor HPA Pump Fill Station Auto-Stop,Oil-Free Powered by 12V DC or 110V AC with Water/Oil Separator

  • ...sure!(after the inflation stops halfway,please release the pressure first and then start again).
  • ⚡【DOUBLE FILTRATION & OIL-FREE】:SMACO paintball air compressor uses fan cooling, does not need oil, clean and hygienic, no need for an external water pump to cool. In addition, it is also equipped with an oil-water separator ,the 5μm fiber and active carbon combined filter element can effectively filter moisture and other contaminants in the air, output clean and dry high-pressure air..
  • ⚡【WIRE SPOOL DESIGN& EASY TO CARRY】:The scuba compressor adopts a spool design, so we don’t have to worry about the wire winding. At the same time, the integrated design of transformer and compressor and fan cooling design are very convenient for us to carry and for us to inflate outdoors..
  • ⚡【WIDELY APPLICABLE】:This Portable 4500 psi air compressor is mainly designed for PCP air rifles, paintball guns, and scuba tanks . Fill a 0.5L tank from 0psi to 3000psi is a swift 11 minutes.
  • Fill a 1L tank from 0psi to 3000psi is a swift 26 minutes.
  • Fill a 2L tank from 0psi to 3000psi is a swift 46 minutes.(The duty cycle of the machine is 25 minutes run / 10 minutes cool. This allows for filling of larger tanks,as long as the compressor is allowed to cool.).
Check Stock

GX PUMP CS2 Portable PCP Air Compressor, 4500Psi/30Mpa,Oil-Free,Powered by Car 12V DC or Home 110V AC with Adapter (Included), Paintball/Scuba Tank Compressor Pump with Extra Moisture-Oil Separator

  • ...ke other electric high pressure air pump which needs the standard oil and cooling water when working in the market, this pcp air rifle compressor does not need oil, clean and hygienic, no need for external water pump to cool. This will save you a lot of energy in future using. We also put a black extra oil-moisture separator (not installed) in the package. Note: New version does not include grease syringe any more..
  • Convenient Car 12V DC or Home 110V AC Power Choice : This air compressor can be powered by the 12V car battery , aslo can be powered by the home AC outlet with the extra 110V transformer (included). This will make this pcp air pump more usefull as you can use it anywhere. Pls note this CS2 is manually stop version, if you need setting stop pressure function , pls choose our CS3 version. Our CS2 and CS3 version has better motor and compression structure comparing with CS1 version..
  • Fast Inflating Speed and Powerful PCP Compressor : This new air compressor can provide up to 250W power. The inflation pressure can reach 4500 PSI/300 Bar and the air pump inflating speed can reach 2700r/min.Test Inflating Result : 0.5L container, from 200BARS to 300BARS takes about 8 minutes.
  • Test Inflating result : 0.5L container, from 0BARS to 300BARS takes....
Check Stock

#120 Aluminum Oxide - 8 LBS - Fine Sand Blasting Abrasive Media for Blasting Cabinet or Blasting Guns.

  • IDEAL SURFACE TREATMENT: The pressure sandblasting can perfectly handle the surface of large workpiece, suitable for the high density surface treatment requirements.operating pressure can be achieved 125 psi.
  • STURDY WELDED STEEL TANK: Sturdy welded steel tank, highly efficient and durable. the powder coating can resist rust and corrosion, this sand blaster is unlikely to be deformed and damaged，98 " long hose with check valve，more flexible.
  • GAS-WATER SEPARATOR: Gas-water separator can keep the drying of sandblasting in the barrel and meet higher requirements of sandblasting,Since wet sand tends to clog,our sand blaster can make sure the the compressed air stays dry to prevent clogging.
  • QUICKLY REMOVE: Pressutized design 30% more sandblasting power than siphon units ,this sand blaster is designed for outdoor large jobs, can remove rust from outdoor iron frames, statues and other immovable objects, remove car paint and marble inscriptions, etc.
  • RUBBER WHEEL AND HANDLE DESIGN: Equipped with handle is bending Angle in line with human comfort design and two 6" rubber wheels that allow easy movement of the machine while working.
Check Stock

Schulz REFRIGERATED AIR Dryer for AIR Compressor, Compressed AIR Systems, 100 CFM, Good for 20HP & 25HP COMPRESSORS (with PRE-Filter)

  • NEW 100 CFM SCHULZ NON-CYCLING REFRIGERATED AIR DRYER WITH INDUSTRIAL RATED ARROW PNEUMATICS WATER SEPARATOR.
  • THIS IS A COMPLETE KIT OF EVERYTHING YOU NEED FOR MOISTURE AND OIL FREE ULTRA DRY AIR (COMPRESSED AIR PIPING NOT INCLUDED).
  • DRYER: 100 CFM @ 100 PSI / 1.25" FEMALE NPT INLET & OUTLET / DEW POINT: 41 DEGREES / 200 PSI MAX INLET / MAKE SURE YOUR COMPRESSOR OUTPUT IS A MAX OF 175 PSI SO TO NOT DAMAGE THE PRE-FILTER.
  • STAGE 1: ( ARROW PNEUMATICS F329-10WF3 ) WATER SEPARATOR FILTER RATED FULL INDUSTRIAL / 175 PSI MAX INPUT / 3 MICRON ELEMENT, INTERNAL FLOAT DRAIN (AUTO DRAIN).
Check Stock