Best Air Max 98

AICase Waterproof Phone Protective Case for iPhone Series,98FT/30M Underwater Photography Housing for Deep Sea Diving,Snorkeling,Surfing,Swimming,Water Sports for iPhone 13/12/11/XR/X/8/7

  • ... in the underwater. The case has three 1/4-20 tripod type mounting locations for professional photography equipment like monopod, tripod or stabilizer..
  • 【Uniquely Designed Vacuum Device】Before using our products in the water,you need to use a vacuum pump to extract the air from the iPhone diving case.Which can better protect the phone from water leakage,also prevent fogging on the phone screen.This waterproof housing case with upgraded waterproof sealing ring and tight buckle that help avoid water leakage effectively..
  • 【High Light Transmittance】- Featuring 99.99% transimittance. The case lens is made of ultra-thick tempered glass with high light transmittance, which can keep a good photo shooting results and maintain clear and vivid video quality. Your movement and photographic effects are also unaffected by anti-surf pressure. The main body is made of high-quality PMMA plastic, makes it sturdy enough to protect your camera lens and display screen against high impact drops, dents and scratches..
  • 【 Easy access&Simple to use 】– This diving iPhone case requires no complicated operations,put the phone in the r....
Check Stock

Enermax Liqmax III 120 BASIC High-Performance AIO CPU Liquid Cooler - 120mm Radiator 120mm PWM Fan for Intel LGA1700/AMD AM5 5 Year Warranty

  • Luminous Aurabelt supports Synchronizable RGB lighting via motherboards with 4pin RGB header(s)(12v RGB).
  • Dual Chamber water block design isolates the pump from heat to prolong cooler lifetime.
  • Patented Shunt-Channel-Technology (SCT) boosts thermal conductivity and eliminates any heat surges.
  • Dual-Convex fan blades creates down force air pressure (max. 1.98mmH2O) and high-volume air flow (max. 72.1CFM).
  • Intel/AMD CPU socket support: LGA2066, LGA2011-v3, LGA2011, LGA1700, LGA1200, LGA1151, LGA1150, LGA1156, LGA1155, AM5, AM4, AM3+, AM3, AM2+, AM2, FM2+, FM2, FM1.
Check Stock

Mophorn Air Hydraulic Pump 10000 PSI 1/2 Gal Reservoir Hydraulic Foot Pump Air Treadle Foot Actuated for Auto Body Frame Machines and Pulling Post

  • Fundamental Parameters: The hydraulic foot pump has a maximum working pressure of 10,000 PSI, used for all 10-ton applications. Action: Single Acting, Flow Rate: 0.85 liters / 0.22 gallons per minute, Air Connection: 1/4" NPT, Output Oil Hole: 3/8" NPT, Hydraulic Oil Type: AW-32, Oil Capacity: 98 Cubic Inches / 1.6 Liters(1600 cc), Max Input Air Pressure: 120 psi / 8 bar, Fuel Tank Capacity: 1.6L ± 0.1L, Maximum Oil Output: 1.3L, Oil Output Pressure: 75mpa..
  • Foot-Actuated Design: The air hydraulic pump adopts a user-friendly foot-actuated design to provide hands-free operation for pumping and releasing the load, saving the operator's time and effort with strong power and high output pressure. The convenient 2-stage release mechanism gives fast or metered ram return while reducing hydraulic shock..
  • Sturdy & Compact Construction: This air hydraulic foot pump features an aviation aluminum pump core and a high-quality metal shell to handle tough industrial applications. 1.6L oil tank has a larger capacity with 98 cubic inches / 1.6 liters output oil. Built-in internal relief valve protects the hydraulic components regardless of hydraulic pressure..
  • Durable Oil Pipe Included: This hydraulic air pump is equipped with a 1 m /3 ft high-pressure oil pipe that f....
Check Stock

Inflatable Sport Boats White Water River Raft 12 feet

  • The 12-foot white water raft is designed with HEAT-WELDED heavy-duty PVC that is UV resistant to minimize heat and weathering..
  • The drop stitch air floor has our unique self-bailing “Sport DS Curves” that allows water to sneak through the side cracks to bail out of the raft while providing a ridged stiff floor platform for use. Never worry about standing water at the bottom of your raft again..
  • The bottom of the raft is re-enforced with thicker 1.2mm material and addition material chafers along the underside of the tubes. This helps protect the most vulnerable spots. There are also two chafers on top of the tubes for frame installation. The raft has spots for 3 thwarts total (Includes 2 thwarts with boat). Interior D-rings for a storage container and frame attachment points. D-rings surround the raft to add a lifeline rope (rope not included)..
  • Drop Stitch Air floor: Unique “Sport DS curve” design with 1.2mm heavy-duty material. Air Floor thickness: 6″ / Self-bailing boat / Bottom of boat (under the air floor insert): Black PVC 1.2mm re-enforced. The black PVC bottom with self-bailing holes under the air floo....
Check Stock

SUPER HEAVY DUTY HIGH FLOW AIR FILTRATION SYSTEM, 2 STAGE PARTICULATE FILTER PLUS OIL REMOVING COALESCING FILTER COMBINATION (1" NPT, AUTO DRAIN)

  • 1" NPT, HEAVY DUTY INDUSTRIAL GRADE AIR FILTRATION AND IN-LINE AIR DRYER COMBINATION WITH PRESSURE REGULATOR. WITH INTERNAL FLOAT DRAIN (AUTO DRAIN) STAGE 1..
  • 175 PSI MAX INPUT PRESSURE, EQUIPPED WITH 11oz METAL BOWLS, VISIBLE SIGHT GLASSES, PRESSURE GAUGE, WALL MOUNTING BRACKET AND 4 BAGS OF DESICCANT BEADS.
  • STAGE 1: PARTICULATE FILTER/WATER TRAP WITH PRESSURE REGULATOR. 5 MICRON ELEMENT REMOVES 95% OF MOISTURE AND DEBRIS, REGULATOR WILL ADJUST PRESSURE FROM 7 TO 175 PSI.
  • STAGE 2: COALESCING / OIL REMOVING FILTER, EQUIPPED WITH 0.01 MICRON ELEMENT WILL REMOVE 99.98% OF MOISTURE, MOISTURE VAPOR AND OIL THAT MADE ITS WAY PAST STAGE 1..
  • STAGE 3: IN-LINE DESICCANT AIR DRYER WILL DRY OUT THE OUTGOING COMPRESSED AIR LINES BEFORE REACHING YOUR PNEUMATIC TOOLS, BEADS TURN FROM BLUE TO PINK WHEN TIME TO CHANGE..
Check Stock

Mophorn Air Hydraulic Pump 10000 PSI Air Over Hydraulic Pump 1/2 Gal Reservoir Air Treadle Foot Actuated Hydraulic Pump 3/8\ NPT with 6 ft Hose 2 Connector Single Acting for Car Repair (Orange)

  • Fundamental Parameters: The hydraulic foot pump has a maximum working pressure of 10,000 PSI, used for all 10-ton applications. Action: Single Acting, Flow Rate: 0.85 liters / 0.22 gallons per minute, Air Connection: 1/4" NPT, Output Oil Hole: 3/8" NPT, Hydraulic Oil Type: AW-32, Oil Capacity: 98 Cubic Inches / 1.6 Liters(1600 cc), Max Input Air Pressure: 120 psi / 8 bar, Fuel Tank Capacity: 1.6L ± 0.1L, Maximum Oil Output: 1.3L, Oil Output Pressure: 75mpa..
  • Foot-Actuated Design: The air hydraulic pump adopts a user-friendly foot-actuated design to provide hands-free operation for pumping and releasing the load, saving the operator's time and effort with strong power and high output pressure. The convenient 2-stage release mechanism gives fast or metered ram return while reducing hydraulic shock..
  • Sturdy & Compact Construction: This air hydraulic foot pump features an aviation aluminum pump core and a high-quality metal shell to handle tough industrial applications. 1.6L oil tank has a larger capacity with 98 cubic inches / 1.6 liters output oil. Built-in internal relief valve protects the hydraulic components regardless of hydraulic pressure..
  • Oil Pipe & Spray Gun Included: This hydraulic air pump is equipped with a 1.25 m / 4 ft high-pressure oil pip....
Check Stock

3 Stage Heavy Duty Industrial Grade Filter Regulator Coalescing Desiccant Dryer System For Compressed Air Lines Metal Bowls Great For Paint Spray And Plasma Cutter 3/4 Npt Manual Drain

  • 3/4" Npt, Industrial Rated 3 Stage Combo Water Filter/ Pressure Regulator/ Coalescing Filter/ Desiccant Dryer System, With Wall Mounting Bracket And....
  • 225 Psi Max Input. This Unit Will Regulator Your Incoming And Outgoing Air Pressure While Removing Moisture Water, Moisture Vapor And Oil From Your....
  • Stage 1: Water Trap Filter / Pressure Regulator. Equipped With 5 Micron Element To Remove 95% Of The Initial Moisture And Debris From Your Compressed....
  • Stage 2: Coalescing Filter Also Known As Oil Removing Filter Armed With A 0.01 Micron Element That Removes 99.98% Of Moisture, Moisture Vapor And Oil....
  • Stage 3: Desiccant Air Dryer, Dries Out Your Super Clean Air Before Going Downstream To Your Air Tools. Uses 5Oz Desiccant Beads In The Bowl. Beads....
Check Stock

TerraBloom 4\ Silent Inline Booster Fan, 47 CFM, Intake Quiet Mixed Flow Energy Efficient Blower for Air Circulation in Ducting, Vents, Grow Tents

  • IMPORTANT NOTE ON FAN USE: This is a Light Duty inline fan that Generates 47 CFM (Cubic Feet Per Minute) Airflow. It is Not Suitable For Carbon Filter Applications. For Carbon Filter Applications Please Consider More Powerful Fans that Generates 150+ CFM of Airflow.
  • 4" (98 mm) INLINE FAN INCLUDES: 4 Inch (98 mm) Outside Diameter x 6 Inch Length Fan, 8 Foot Grounded Power Cord, Mounting Bracket for Flat Surface Mounting With Hardware.
  • HOUSEHOLD APPLICATIONS: This Premium Built Inline Fan Designed To Exhaust and Intake Air Through 4" Ducts in a Quietest Way Possible. Sound Pressure Level at Full Speed is 25 dB(A) Only..
  • FAN VENTILATION SPECS: Airflow 47 CFM, Power 9W, Voltage 120V, Speed 2250 RPM, 0.11Amps. For Indoor Use Only in Environment With Max Temperatures Not Exceeding 113F. This fan is not suitable for fireplace or furnace applications..
  • WARRANTY: This Inline Fan is Covered by 2 Year Warranty. Contact Us through Amazon For Service..
Check Stock

Electric Gel Ball Blaster, Splatter Ball Blaster High Speed AKM-47 with 20,000 Water Beads Suitable for Boys Kids Adults Age 12+

  • 【Brand Overview】Thermalright is a Taiwan brand with more than 20 years of development. It has a certain popularity in the domestic and foreign markets and has a pivotal influence in the player market. We have been focusing on the research and development of computer accessories. R & D product lines include: CPU air-cooled radiator, case fan, thermal silicone pad, thermal silicone grease, CPU fan controller, anti falling off mounting bracket, support mounting bracket and other commodities..
  • 【Product specification】Thermalright FS140 BLACK V3.
  • CPU Cooler dimensions: 140(L)x146(W)x160(H)mm (5.51×5.75×6.3inch).
  • heat sink material: aluminum, CPU cooler is equipped with metal fasteners of Intel & AMD platform to achieve better installation. The offset asymmetric layout is allowed to installation on first graphics card slot, and the height is compatible with memories within 62mm..
  • 【2 PWM Fans】TL-C12B and TL-D14B, Standard size PWM fan:120x120x25mm (4.72×4.72×0.98 inches) and 140x152x27mm (5.51×5.98×1.06 inches).
  • Noise Level≤25.6dB(A). The high speed of the dual fans will greatly improve the cooling effect, whic....
Check Stock