Best Air Line Brass Tube Fitting

Male Branch Tee Push to Connect Air Line Fittings 1/4 Plastic Plug Tube OD x 1/8 NPT Thread Quick Release Connectors 3 Way Union Fitting Pack of 10

Male Branch Tee Push to Connect Air Line Fittings 1/4" Tube OD x 1/8" NPT Thread Quick Release Connectors 3 Way Union Fitting.
Type: Male Branch Tee 1/4" Tube Od x 1/8" NPT Thread Push to Connect Pneumatic Air Tube Fittings..
High Quality Material: The connector made of high quality plastic and stainless steel.
corrosion resistance, ductility, hundreds of tests, durable, no air leakage..
Push-To-Connect Fittings: Maximum Pressure 0~145Psi.
Components: Male branch tee fitting is used to branch line from female thread in both 90°directions. 360°rotation, after installation, the tube direction can be changed easily. Easy to insert or pull the trachea by hand without the aid of a tool..

Size and Number of Pieces: 1/4" 10pcs 3/8" 10pcs 1/2" 10pcs Tube OD.
Working Pressure Range: Maximum up to 150PSl. Working Temperature Range: '-40℉ to +200℉(-40℃ to +93℃).
Applications: Used with SAE J844 Type A and Type B nylon tubing in air brake system, or in cab air controls, except for where temperature is under -40℉(-40℃) or above +200℉(+93℃)or where battery acid can drip on tubing..
Advantages: Meet D.O.T.FMVSS 571.106 air brake specifications. Meet functional requirements of the SAE 246 & SAE J1131. Machined from CA360 brass. Easy to assemble (no tube preparation or flaring required.) Built in tube support. Can be used with copper tubing by NTA body with long nut and spherical sleeve. Insert should be removed.
Assembly Instructions: 1. Cut tubing as flat as you can. Maximum 15°angle is allowed. 2.Check the port of the mating part free of burrs or debris. 3.Slide sleeve and then nut on the tubing. 4. Insert the preassembled fitting into the tubing and the tubing should be bottomed to the seat of the fitting. 5. Tighten the nut by wrench until one thread remains visible of the fitting body..

straight pneumatic fitting : Air And Water Pressure Range: 0-1 Mpa145 Psi Max Pressure:1.5 Mpa/ 217 Psi/15 Bar Temperature Range 0-60°C | 32～140°F Applicable Tube: Pu/Nylon/Soft Pe Air Line Fittings.
Pushlock Air Fittings And Water Pressure Range: 0-1 Mpa145 Psi Max Pressure:1.5 Mpa/ 217 Psi/15 Bar Temperature Range 0-60°C | 32～140°F Applicable Tube: Pu/Nylon/Soft Pe Airline Fittings.
Easy To Install This Quick Connect Tube Fittings Is Available In Various Styles And Models . Each Model To Serve Its Purpose. All Models Of Push Lock Fittings Are Designed To Suit Your Pneumatic Piping Needs Perfectly.
You Can Easily Change The Air Line Quick Connect Direction Even After Installation. The Release Ring Of Conforms With The Ellipse Design To Ensure That The Disconnecting Of Air Line Connections Is In Good Shape.
All Push-To-Connect Fittings Contains Internal Hexagonal Holes This Enhances The Installation Process In A Narrow Space.Push Connect Fittings Can Be Dismantled And Assembled Easily These Plastic Tube Connectors Meet The Pressures And Temperatures Mentioned.

【Durable】This fitting has nickel plated brass body with POM release button and zinc alloy ferrule. Operating Pressure: 0~145 Psi. High pressure resistance, corrosion resistance and a long service life..
【Push Lock】Quick connect fittings easy to install and remove, just one touch to connect the tube. The release ring adopts ellipse design, removed conveniently..
【Convenience】360°rotation, after installation, the tube direction can be changed easily. This fittings have hexagonal body allowing tightening with wrench, additionally can be screwed with Allen tool, which is especially convenient where there is limited access to installation place..
【Wildly Application】 Working Temperature: 32～140°F. This male straight quick release air fitting is most used in the field for low-pressure hydraulic and pneumatic systems such as Shop Air, Industrial, Automotive Assembly, Printing, Packaging, Aircraft Controls, Textile. As well as moving parts such as cylinders, air bag and air suspension..

THE 3 IN 1 AIR-POWER LINE CONTAINS: Service air line rate to -65F (-55℃), ABS power line (green) rated to -85F (-65℃) Emergency air line rated to -65F (-55℃). Fully enclosed in spiral wrap to prevent lines from becoming tangled. And it is more wear-resistant..
SIZE: 15 feet length, 1/2" brass fitting joint. Heavy duty 15 feet trailer air line & ABS wrap cord assembly..
SPRING JOINT: more durable, joint is not easy to damage. BRASS CONNECTOR: good anti-corrosive and anti-rust properties. Red and Blue handles for easy identification and quick connection..
ELECTRIC CABLE USE HIGH QUALITY COPPER, good heat and electricity conduction, safe and efficient..
REPLACES: Tectran 13S15401, Tectran 169157, Tremec Sloan 455180DSET, Tremec Sloan️ 451098, Philips 11-8115, Phillips️ 30-2171, etc..

Sleeve for a tube compression fitting. Connects to copper, brass, aluminum, or plastic tubing..
This Metals sleeve compression tube fitting is made of brass, connects to a tube.

Bulkhead Fitting Push Connector Type : 3/8 inch, Tube OD 3/8 inch NPT.
Bulkhead Fitting Type: Push In Straight Male Connector.
Body:Nickel Plated Brass Seal, O-Ring NBR.
Bulkhead Fitting Features: high pressure resistant and non tripping, all taper pipe threads are paint Teflon leakage-proof rubber, offering good seal property.
Push Fittings are easy to install, flexible and space-saving, 360-degree rotate freely, Release rings adopt ellipse design, which can be removed conveniently.
Fluid Admitted: Air, Vacuum, Water (No Freezing).
Negative Pressure-100Kpa | -29.5 In Hg. Working Temperature: 0-60¡ãC | 32¡«140¡ãF. Applicable Tube:PU / PA / PE / PVC.

Package include:30pcs sleeve ferrules+30pcs inserts..
Durable and high standard brass compression fitting..
Brass for corrosion resistance,ductility at high temperatures,and low magnetic permeability..
Commonly used to connect lines for air,water,fuel,oil and inert gases in a quick and simple way..

✅ Function -- Barb head for connecting hoses, NPT end used to connect NPT pipes. Air hose pipe can apply to water, gas, oil and fuel as well as air tools..
✅ Premium material -- Brass barbed hose fitting is made of high quality solid brass, firm and durable, providing high resistance to abrasion and corrosion. Solid brass hose barb can withstand up to 100 °C (212 °F)..
✅ Durable -- Air hose fittings is not a cast product and has a thick wall, providing a longer service life than iron and iron galvanized pipe fittings..
✅ Superior threads -- Deeper and smoother threads with barbed edges provide effective connection..
✅ CUSTOMER SERVICE -- Professional factories produce brass air line fittings. Every detail reflects a strong texture performance. Fast Delivery and 30 Days Free Refund..