Best Air Flow Equipment

Tetra Whisper Easy to Use Air Pump for Aquariums (Non-UL)

...t oxygen for your aquarium up to 4.5 feet deep, can be used for tanks from 20 to 180 gallons, up to 3 applications.
【Adjustable Flow Control】: build-in control knob, this fish air pump allows you to adjust the air flow to optimize the performance of your air pump drive equipment, appliance or ornaments. (Please note: Air tubing not included.).
【Run Two devices Simultaneously】: Two outlets fit for 3/16’’ standard airline tubing, it can be running with 2 applications simultaneously so you never have to worry about your fish not getting sufficient air. Designed to work for marine and freshwater.
【Low Noise Level】: ABS thick shell and sealed inner baffle greatly reduces noise, while the soft rubber foot pad can effectively cushion the vibration produced by the motor.
Low Consumption and Easy-To-Use】This aerator measure 4.57 x 4.8 x 3.03 inches. Pressure: 0.02 MPa, Power: 5W. Just connect air pump to air tubing to air stones, protein skimmers or sponge filters, plug it and you're ready to go..

Smaller and lighter than the S600 but using the same-sized diaphragm, The S620 Ti delivers instant air on demand with Super inhalation sensitivity..
An air-balanced flow-through piston housed in a chrome-plated brass body provides constant airflow unaffected by depth, tank pressure, or breathing rate..
Scubaproâ€s patented extended thermal insulating system insulates the inner mechanism, improving cold-water resistance without compromising breathing performance..
The regulator includes two opposing high-pressure ports that let you position the first stage up or down, along with four high-flow and one axial super-high-flow low-pressure ports..
Driven to constantly innovate and improve the diving experience, Scuba builds flawless equipment for the work, sport, and lifestyle of people whose passion is found below the surface..

PREMIUM QUALITY || Premium quality Bunsen burner with both air mix adjustment and gas flow adjustment.
FOR NATURAL GAS || Suitable for use with Natural Gas (methane). Burner comes equipped with a serrated inlet arm that accepts 6-8mm tubing.
DIE CASTED BASE || Aluminum mixing tube is mounted on a circular, die casted zinc alloy base.
ADJUSTABLE || Equipped with a flame stabilizing burner tip, and air ports with collar to adjust the flow of air. Gas flow is controlled by needle valve fitted above the base, permitting easy flame adjustment.
MANUFACTURED BY EISCO LABS || Eisco Labs proudly manufactures its own products using state-of-the-art equipment, and following the highest standards of quality control. Each product is carefully designed by a team of laboratory professionals and experienced engineers with quality and durability in mind.

Gas Type- 2 Positions, LPG 10" W. C & NG 4" W. C, Max inlet pressure PSI: 1/2 (3.5KPa), Gas Flow: 120,000BTU/ Hr. Adjustable outlet pressure 4" &10" Water Column..
Fitting- in 1/2" x out 1/2" NPT Pipe threads. When apply to LP gas, it needs to work with an external regulator (NOT supplied). Install the external regulator between the propane supply source and Maxitrol regulator..
Safety - Our Pressure Regulators Pass CSA certificate for your safety. no gas leaks, ensures safety while using grill, air flow is kept stable and at appropriate levels..
Applications- Stable Gas flow, for Natural LP Gas grills, heater, oven, Gas Welding Equipment, NG gas pressure regulator.
Please take the Hex Screw out to check it's the correct side for your application. LP side and NG side is different. Do not install the regulator too close to the heating equipment or use in very cold environment. Heat or cold can change the resistance of the spring inside the regulator..

Original equipment part number 8K0 133 843 E.
Filters harmful particles such as dust, pollen, sand, soot or even drops of water out of the intake air.
Specially embossed paper for good pleat stability and reducing intake noise.
Balances the air flowing towards the air flow meter and seals off adjacent components.

Original equipment part number 000 090 37 51.
Filters harmful particles such as dust, pollen, sand, soot or even drops of water out of the intake air.
Specially embossed paper for good pleat stability and reducing intake noise.
Balances the air flowing towards the air flow meter and seals off adjacent components.

Smaller and lighter than the S600 but using the same-sized diaphragm, the S620 Ti delivers instant air on demand with super inhalation sensitivity..
An air-balanced flow-through piston housed in a chrome-plated brass body provides constant airflow unaffected by depth, tank pressure, or breathing rate..
SCUBAPRO’S patented Extended Thermal Insulating System insulates the inner mechanism, improving cold-water resistance without compromising breathing performance..
The regulator includes two opposing high-pressure ports that let you position the first stage up or down, along with four high-flow and one axial super-high-flow low-pressure ports..
Driven to constantly innovate and improve the diving experience, SCUBAPRO builds flawless equipment for the work, sport, and lifestyle of people whose passion is found below the surface..

Simplified installations with multi-speed fans, in- accessible air handlers, fan motors with voltage or phase different from controlled equipment.
Polyester film sail mounted on a micro switch snap switch.
Removable spring counterbalances sail to allow mounting in either vertical (up or down) or horizontal air flow.
Low air velocity switch operation makes at 250 fpm and breaks at 75 fpm.

POWERFUL VARIABLE SPEED SWITCH controls motor speed from 950 to 1650 RPM.
IMPACT RESISTANT ABS provides extra durability.
(2) BUILT-IN GROUNDED RECEPTACLES have the ability to run other equipment.
VERSATILE DESIGN allows for use in a variety of applications both indoor and outdoor.
CREATE A COOLER AND CLEANER AIR FLOW in work stations allowing equipment to work faster and more efficiently.