Best Air Cut Off Tool 2

Ridgid R63015 Spiral Cutter, 1-1/4-Inch, Silver

• ✔ 2-WAY CUTTING - First ever siding brake cutter / Cut-off tool to 003cb003ecut003c/b003e effortlessly 003cb003ein both directions (right to left + left to right).003c/b003e -- Fits all Van Mark brakes and all Tapco PRO Series Brakes (1995 and after).
• ✔ 1" OFFSET CUTS - Three cutting wheels make 003cb003eaccurate, clean and effortless003c/b003e cuts at 1" offset up yo 2 layers of aluminum coil stock or up to 24 gauge Stainless Steel..
• ✔ STAYS ON THE BRAKE - With roller wheels, the 2-Way Cut-Off Tool is 003cb003eanchored to the brake's anvil.003c/b003e This allows it to travel the length of the brake to make a cut, and then later travel back the other way to make the next cut, while still attached to the brake..
• ✔ TUCKS OUT OF THE WAY - This siding bender cut-off tool automatically retracts to fold on itself. By doing so, it does not interfere with the bending process..
• ✔ LIGHTWEIGHT + QUALITY & DURABILITY - 003cb003eLightest003c/b003e portable siding bender 003cb003ecut-off tool003c/b003e in the industry (Half the weight) for easy handling - 003cb003eLong lasting003c/b003e heat treated and zinc plated cutting wheels - CNC machined and anodized body and tracking pulleys - 003cb003eHigh quality003c/b003e sealed roller bearings & stainless steel f....

DEWALT Grinder Tool Self-locking Touch Control 3-Inch DWMT70784

K Tool International 42' Belt Drive Drum Fan; Industrial, Garage, Shop, High Speed 2-Speed, Durable, Cut-Off Protection, Easy Mobility Rubber Wheels; SAFETY YELLOW KTI77743

• [2-SPEEDS] - Fan provides both High speed and Low speed. High speed push 14,800 CFM while low speed pushes 11,250 CFM..
• [EASY MOBILITY] - Fan comes with two 8" rubber wheels to provide ease of movement in shop, garage, or warehouse..
• [CUT-OFF PROTECTION] - K Tool industrial fan provides cut-off technology protection to eliminate possibilities of overheating..
• [DRY, COOL, WATER DAMAGE, VENTILATE] - The versatility of this floor fan provides for a wide range of uses. The concentrated high powered fan can be used for cooling down on a hot day, drying out water damaged areas, ventilating air and much more!.
• [DURABLE] - The K Tool International belt drive fan is rugged and made for shop use..

Cen-Tec Systems 90155 1 ½” Back Pack Vacuum Cleaning Accessory Pack with Telescopic Commercial Wand, Black

• The 90155 is an ideal package for the most frequently replaced back pack vacuum accessories on back pack vacuums equipped with 1.50” hose. To confirm compatibility with your vacuum measure the inside diameter of your hose cuff with a ruler to confirm it has an approximately 1.50” opening.
• A 14” nylon fill floor brush with window cut insures larger debris can be captured without having to lift the tool from the floor surface. The 14” scalloped carpet tool is ideal for all carpeted surfaces and fiber covered walk off mats at entry points.
• A 3.5” natural fill dusting brush features a fill guard to prevent the fill from collapsing into the air stream. A 5” upholstery tool fits into standard 1.50” hose cuffs. The 15” paddle style crevice tool is angle cut to insure continuous air flow.
• 43” fully compressed to 58” fully extended ratcheting at one inch intervals.
• Compatible with most major brands of back pack vacuums, including: Pro-Team, Perfect, Bissell, Mosquito, Sandia, Mercury, Tennant, Karcher, Nilfisk, and Hawk.

Garden Grafting Tools Kit – Pruning Shears for Gardening, Garden Scissors Set for Plant Branch Vine Fruit Tree Cutting, Including Grafting Tapes, Grafting Knife and 3 Replacement Blades

• 2 in 1 Garden Grafting Tools: The gardening tools set includes a grafting pruning tool, 3 replaceable blades, a wrench and a screwdriver, 2 grafting tapes. The high quality packaging design meets your grafting needs all at once.
• Durable Material: Our grafting tool sets are made of #65 high carbon steel double-edged shear blades and high-strength ABS plastic handles, which is more durable compared with traditional grafting tools. The oil on the blade’s surface is designed to reduce contact with air and moisture, protecting the blade from rust.
• Easy to Use: Grafting cutting tool with 3 replaceable blades ( Ω-Cut U-Cut V-Cut) for precise and clean cut, suitable for grafting fruit tree branches and the grafting diameter is 5-12mm/0.2″-0.47″. Cut, join, tape, and complete the grafting work without the need for professional guidance. The grafting tapes for wrapping plants to prevent air ingress.
• High Survival Rate: To ensure proper alignment by using the same blade for cutting both the scion and the stock, no additional trimming is required for the transplant and significantly improve the survival rate.
• Perfect Garden Tool Set: The grafting tool with trimmer is very easy to use and perfectly cuts every time you use it. It is suitable for a variet....

iLiving ILG8P30-72 Commercial Pedestal Floor Fan, 30-Inch, Industrial Heavy Duty Floor Standing Fan with 7261 CFM, Perfect for Home, Shop, Bedroom, Gym, Garage, Black

• 2-SPEEDS - Fan provides both High speed and Low speed. High speed pushes 22,100 CFM while low speed pushes 13,000 CFM..
• EASY MOBILITY - Fan comes with four 4" rubber wheels to provide ease of movement in shop, garage, or warehouse..
• CUT-OFF PROTECTION - K Tool industrial fan provides cut-off technology protection to eliminate possibilities of overheating..
• DURABLE - The K Tool International belt drive fan is rugged and made for shop use. 6ft power cord, UL & CUL Approved. 120V/60Hz, 8.8 Amps.
• DRY, COOL, WATER DAMAGE, VENTILATE - The versatility of this large drum fan provides for a wide range of uses. The concentrated high-powered fan can be used for cooling down on a hot day, drying out water damaged areas, ventilating air and much more!.

2 in 1 Grafting Tool Pruner Kit Gardening Pruning Tool for Fruit Tree Grafting Branch Trimming Cutting

• Professional Grafting Tool: This gardening grafting tool kit includes 2 in 1 grafting pruning tool and 3 replaceable blades. The 3 replaceable graft cutting blades (Ω-Cut & U-Cut & V-Cut) for cutting fruit branches with diameters from 5 mm to 12 mm. Precise and perfect cutting improves survival rate..
• High Quality Materials: This grafting tool comprises #65 high carbon steel double-edged shear blades with high-strength anti-skid ABS plastic handles. The Chrome plated surface reduces contact with air and moisture, further protecting the blade from lubrication and rust, making the tool more durable..
• 2 in 1 Grafting Pruning Pliers: The sharp and durable stainless steel blade with a anti-skid handle allows you to cut scion and stock better..
• Application: This professional grafting pruning tool is easy to use and perfect for cuts. It is suitable for a variety of plants, especially fruit trees.
• Tips for Using: We recommend that the blade be lubricated to extend its service life after each use..

PRVEW 50-Pack Die Grinder Cut Off Wheel 3 Inch, 3"x1/16"x3/8"Quality Cutting Wheel Cutting Disc for Metal&Stainless Steel

• [Size Specification] - The PRVEW cut off wheel 3 x 3/8 Inch is perfectly compatible for all 3" portable die grinders and angle grinders with 3/8" arbor.
• Thickness:1/16 inch(1.6mm), Operating up to 20300 RPM 80M/S..
• [Reliable&Safe Discs] PRVEW metal cutting disc is reinforced by double fiberglass meash,complying with international standards and safety requirements such as EN 12413,.
• [Long Lasting Discs] PRVEW metal cutting disc is made of premium aluminum oxide grain, for which provides aggressive cutting action and durable long service life.
• [Great Performance] The thin design of 1/16 inch thickness cutting off wheels provides fast, precise, and clean cutting performance with minimal burrs and material waste..
• [Multi-Applications] PRVEW 3-inch cutting discs compatible with Die Grinder, Air Cut Off Tool and Electric Cut Off Tool. and are very suitable for super-fast, clean cutting in carbon steel, stainless steel, iron, copper, and other ferrous metals..

K Tool International 77742; 42” Belt Drive Drum Fan; Industrial Fan, Garage, Shop, High Speed 2-Speed, Durable, Cut-Off Protection, Easy Mobility Rubber Wheels; 1 Year Warranty, 14,800 Max CFM, Black

• [2-SPEEDS] - Fan provides both High speed and Low speed. High speed push 14,800 CFM while low speed pushes 11,250 CFM..
• [EASY MOBILITY] - Fan comes with two 8" rubber wheels to provide ease of movement in shop, garage, or warehouse..
• [CUT-OFF PROTECTION] - K Tool industrial fan provides cut-off technology protection to eliminate possibilities of overheating..
• [DRY, COOL, WATER DAMAGE, VENTILATE] - The versatility of this floor fan provides for a wide range of uses. The concentrated high powered fan can be used for cooling down on a hot day, drying out water damaged areas, ventilating air and much more!.
• [DURABLE] - The K Tool International belt drive fan is rugged and made for shop use..