Best Air Brake Quick Connect Fittings

Utah Pneumatic Straight 1/4” Od Air Line Union push air fitting Quick Connect Fittings pneumatic push connect fittings Air Tube Fitting 10 Pack

  • straight pneumatic fitting : Air And Water Pressure Range: 0-1 Mpa145 Psi Max Pressure:1.5 Mpa/ 217 Psi/15 Bar Temperature Range 0-60°C | 32～140°F Applicable Tube: Pu/Nylon/Soft Pe Air Line Fittings.
  • Pushlock Air Fittings And Water Pressure Range: 0-1 Mpa145 Psi Max Pressure:1.5 Mpa/ 217 Psi/15 Bar Temperature Range 0-60°C | 32～140°F Applicable Tube: Pu/Nylon/Soft Pe Airline Fittings.
  • Easy To Install This Quick Connect Tube Fittings Is Available In Various Styles And Models . Each Model To Serve Its Purpose. All Models Of Push Lock Fittings Are Designed To Suit Your Pneumatic Piping Needs Perfectly.
  • You Can Easily Change The Air Line Quick Connect Direction Even After Installation. The Release Ring Of Conforms With The Ellipse Design To Ensure That The Disconnecting Of Air Line Connections Is In Good Shape.
  • All Push-To-Connect Fittings Contains Internal Hexagonal Holes This Enhances The Installation Process In A Narrow Space.Push Connect Fittings Can Be Dismantled And Assembled Easily These Plastic Tube Connectors Meet The Pressures And Temperatures Mentioned.
Check Stock

Universal 8mm Quick-Disconnect Plug Adapter Stainless Steel 1/8 BSPP Female Thread PCP Paintball Charging Fittings with Sealing O-Ring

  • Material - This 1/8" BSPP female thread quick disconnect plug is made of high-quality Stainless steel, Size: 26mm / 1.02 inch Length, male quick....
  • Accuracy - Use NC machining, accurately, accurately, suitable for 8mm converter plug and 1/8" BSPP male thread, supplied with sealing ring washer,....
  • Easy to Operation - Simply connect each fill adapter to the quick disconnect air tool fittings, It can withstand 3000-5000 psi pressure, this is one....
  • Quick Connect Adapter - Quick disconnect a male to female thread air tool fittings, will allow you to move air from one tank to paintball, to move air....
  • Application - Inflatable cylinder fittings connect to high pressure hose, compatible with PCP airsoft, air gun, paintball, paintball tanks and SCBA....
Check Stock

Universal 1/8'' NPT Male Thread to 8MM Female Quick-Disconnect Connector Adapter, Black Zinc Plated Copper, PCP Paintball Charging Fittings with Sealing O-Ring

  • Material - Made of high-quality black zinc plated copper, Size: 31mm / 1.22 inch Length, Rated to 4000 PSI, Max Pressure: 6000 PSI, Temperature Resistance: 1000 ℃..
  • Accuracy - NC machining, accurately, suitable for 8mm Female converter and 1/8" NPT female thread, supplied with sealing ring washer, reliable and no leakage..
  • Easy to Operation - Simply connect each fill adapter to the quick disconnect air tool fittings, high pressure resistance，this is one of the needed items to have in your parts kit..
  • Quick Connect Adapter - Quick disconnect a male to female thread air tool fittings, will allow you to move air from one tank to paintball, to move air in a big bottle to a smaller more portable bottle, or connect to air tanks when used with two fill adapters..
  • Application - Inflatable cylinder fittings connect to high pressure hose, compatible with PCP airsoft, air gun, paintball, paintball tanks and SCBA tanks filling etc..
Check Stock

Lisle 22920 8 mm Low Profile Jiffy-Tite Disconnect Tool

  • Disconnects quick connect push-in connectors found on heavy-duty truck air systems and more.
  • Smallest size also works on automatic adjusting air suspension systems for automobiles.
  • Disconnects air systems on brakes, suspension, steering, engine, transmission and other auxiliary equipment.
  • Also disconnects other quick connect push-in fittings, including: flow control valves, check valves, shuttle valves, quick exhaust valves and other function control fittings in compressed air systems.
  • Each tool is double-ended to disconnect air lines even in hard-to-reach areas, angled end allows maximum leverage, smaller end fits in tight spots.
  • Set comes with five popular sizes: 1/8"-5/32.
Check Stock

ATPEAM Pneumatic Vacuum Brake and Clutch Fluid Bleeder Tool Kit | Car Truck Motorcycle Brake Oil Change Set with Extractor and Refill Bottle, 4 Master Cylinder Adapters, 2 Air Quick Plugs

  • ...which can hook on the engine hood and keep the bottle above the vehicle bleeder valve, as well as the trigger locker is also helpful for hand-free when suck. Also, you do not need to tread the brake pedal again and again when use this brake and clutch bleed tool..
  • Automatic Brake Refill Device: There is a long screw fittings on 0.8L refill bottle cap, which can work with the master cylinder adapter to snap on the mouth of the vehicle's brake fluid reservoir, without hand support. Fully open the valve on the long screw, the fluid will flow out, and stop once the brake fluid level in the reservoir has been sufficient to cover the threaded port, no need to keep an eye on it. But if 0.8L is not enough, remember to add new oil in time.
  • Easy To Use: Select a fill bottle adaptor for the master cylinder to hold it in place, fill the bottle with fluid, pop it on the master cylinder and open the valve.
  • Once the master cylinder is filled, the bottle flow will stop so you can connect the vacuum jar to an air compressor (not included), connect the bleed hose to the brake bleeder and open bleeder, then pull trigger on jar and lock in place, let it draw for 4-5 minutes, close bleeder, and check brake pedal pressure.
  • Specifications and Accessories: 34 oz used fluid bot....
Check Stock

3/8 Air Fittings Push to Connect Fittings,CEKER 3/8 Inch Tubing Od x 3/8\ NPT Thread Male Pneumatic Fittings Air Line Fittings Quick Connect Push in Connectors 5Packs

  • Type:3/8" Od x 3/8" NPT Male Push to Connect Fittings.
  • 3/8 inch Tube Air Fittings Fluid Admitted: Air, Water (No Freezing).
  • 3/8 Quick Connect Fittings Working Pressure:0-1.0mpa | 0-150psi.
  • 3/8" od tube Pneumatic Fittings Applicable: Pipe PU/ PA/ PE/ PVC.
  • Working Temperature: 0-60°C | 32～140°F.
  • Push to connect air fittings 3/8 is made of Nickel Plated Brass and quality plastic- corrosion resistance, ductility.
Check Stock

CEKER 1/4 Tube Fitting Push Connect Pneumatic Fitting,PC 1/2\ Tube Od x 1/4\ NPT Thread Male Straight Union Air Fittings Push in Fitting Quick Release Pneumatic Connectors 2Pack

  • Type:1/2" Od x 1/4" NPT Male Push to Connect Fittings.
  • 1/4 inch Air Fittings Fluid Admitted: Air, Water (No Freezing).
  • 1/4 Quick Connect fittings Working Pressure:0-1.0mpa | 0-150psi.
  • 1/2" od tubing Pneumatic Fittings Applicable: Pipe PU/ PA/ PE/ PVC.
  • Working Temperature: 0-60°C | 32～140°F.
  • 1/4 Push to connect air fittings is made of Nickel Plated Brass and quality plastic- corrosion resistance, ductility.
Check Stock

Craftsman 20-pc Air Accessory Kit (CMXZTSG1139NB)

  • Starter Kit: includes essential accessories needed to equip a new air compressor.
  • Applications: Attachments included for inflating tires, sport balls and air mattresses.
  • connecting compressor to air hoses and air tools.
  • Recoil hose connects to all included accessories with included quick-connect fittings.
  • Specifications: standard 1/4-inch NPT male or female threads.
  • Includes: recoil air hose, 2 - sport ball inflation needles, blow gun, safety nozzle, rubber nozzle, tapered nozzle, blow gun nozzle adapter, 2 - 1/4-in female brass quick-connect couplers, 3 - male steel quick-connect plugs, 2 - female steel quick-connect plugs, dual-chuck tire inflator, 1/4-in male adapter, 1/4-in female adapter, tire pressure gauge, and thread sealant tape.
Check Stock

OEMTOOLS 25036 Bleed-O-Matic One-Man Brake Bleeder Kit, Featuring An Opaque Brake Bleed Bottle w/ Transparent Hoses and Tapered Fittings, No Mess Brake Fluid Bleeding (Packaging May Vary)

  • RELIABLE BRAKE BLEEDING TOOL: Our brake fluid bleeder kit features a reliable magnet for one-man operation.
  • Designed for use on calipers, wheel cylinders, and master cylinders to give you the most effective brake line bleeder kit for your budget.
  • NO MESS BRAKE BLEED: Get a tight fit over calipers with our tapered fittings and transparent brake bleeder hose of our brakes bleeder.
  • The transparent brake bleeder tubing ensures that you’ll know when the brake line is running clear and air-free.
  • ONE MAN OPERATION: No need to use the two-person method for your brake bleed.
  • Attach the one person bleeder's reservoir to the rotor or similar metallic vehicle surface with the strong magnetic attachment and pump the brake.
  • DURABLE BRAKES BLEEDING KIT: The quality construction of our 2 piece design gives you a durable no-mess operation.
  • Bleed brakes while keeping everything clean of caustic brake fluid.
  • Our handy reservoir makes disposal of brake fluid quick and easy.
  • FITS MOST VEHICLES: Our specially tapered fittings work on most vehicles.
  • The hoses hold firmly to the durable brake bleeder bottle and tapered fittings to create a no-mess operation that keeps your components clean of brake fluid.
Check Stock