Best Adjusting Forged Couplers

Kegco Standard Double Faucet Tower Kegerator Conversion Kit No Tank - STCK2-542-2_NT

  • ...ou dispense two kegs at the same pressure! It features a chrome plate brass body, two gauges to display PSI and Co2 volume, and a large, easy-to-use pressure adjustment knob. Also included are a manual pressure release valve and an integral tamper-proof safety relief valve that releases at 45-psi..
  • LEVER HANDLE KEG COUPLERS: These NSF-approved Kegco KT85D-L “D” System Keg Couplers feature sturdy nickel-plated forged brass bodies with stainless steel probes, and are designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use – simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • DUAL FAUCET DRAFT BEER TOWER: This 3″ diameter air-cooled chrome-plated metal draft beer tower comes complete with two NSF-approved chrome-plated metal faucets with brass levers and two black ABS plastic faucet knobs. Two 5′ lengths of 3/16″ I.D. beer line extend from the bottom of the tower. These thermoplastic vinyl beer hoses remain flexible and durable at recommended temperatures and pressures, are unaffected by normal cleaning compo....
Check Stock

Kegco Deluxe Two Keg Door Mount Kegerator Conversion Kit w/ 5lbs Tank

  • ...sy to adjust the pressure inside of the keg. The gauge on top of the regulator indicates CO2 pressure in the keg, while the gauge on the side indicates the remaining volume of CO2 gas. Includes a y splitter and two independent shut-off valves for dispensing up to two kegs at the same keg pressure..
  • LEVER HANDLE KEG COUPLERS: These NSF-approved Kegco KT85D-L D System Keg Couplers feature sturdy nickel-plated forged brass bodies with stainless steel probes, and are designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use – simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • DOOR MOUNT STAINLESS STEEL DRIP TRAY: Our popular 10″ wide door mounted drip tray’s clean design and reliable stainless steel construction make it easy to enjoy delicious draft beer every day – mess-free! Installation is simple, thanks to the two conveniently placed screw holes on the backsplash. When it’s time to clean, the top vent can be removed for easy access. Because this drip tray does not have a drain, you will need to empty it manually.....
Check Stock

46pcs Piping Bags and Tips Set,Silicone Pastry Bags Cream Icing Bags Cake Decorating Bags for Cake Cupcake Cookies Decorating Supplies

  • Healthy Material is Safe for Your Family: Food grade reusable silicone bags and PP plastic couplers is nontoxic, tasteless and BPA free. You can easily decorate your cakes, pies, donuts and cookies with your kids and friends at home. Silicone piping bag is reusable and eco-friendly, do not harm to the environment..
  • Save Your Time and Money: Soft and durable silicone bags are good choice in your bakery room, they will never break or burst. 3 sizes reusable piping bags (S: 12.2"*6.69", M: 13.38"*7.48", L: 15.35"*9.05") and bonus 6 couplers meet all cake decorating projects. You can use each bag for a different icing color without frequently changing and washing bags. Bonus couplers help to fast changing piping tips. Happy to decorate different colors cakes or cupcakes at the same time..
  • Easy Use and Wash: Silicone pastry bag can be easily trimmed and work with any decorating couplers and tips. Smooth interior is easy squeezing and washing. Anti-slip rough exterior is good for gripping. Just screw On/Off the couplers to fast changing nozzles, and you can make different patterns at once..
  • MORE PIPING BAGS AND COUPLERS: Durable silicone cake decorating bags are designed for repeated use. But to decorate cakes with your kids and friends with different icing c....
Check Stock

Hromee 18 Pieces Air Coupler and Plug Kit 1/4-Inch NPT Air Hose Fittings and Compressor Accessories with Universal Quick Coupler Brass Ball Valve Swivel Air Plug and Tee Pipe Fitting

  • UNIVERSAL QUICK COUPLER - The 1/4'' NPT universal couplers (male and female) which fit Industrial (I/M), ARO (A) and Automotive (T) so you do not worry about whether it is fitting or not. Heavy duty steel air fittings are ideal for general purpose applications and the brass has good solid and durability..
  • SWIVEL QUICK PLUGS - The special design of 1/4" basic swivel body, preventing hose kinks and increasing mobility, great for air tools to reduce strain on wrist and air hose. Made of high-quality corrosion resistant zinc plated hardened steel, solid body for use of a longer life. The maximum operating pressure is 300 psi..
  • HEAVEY DUTY BALL VALVE - The ball valve is made of forged brass for corrosion resistance, ductility at high temperatures and low magnetic permeability. It has a plastic-covered lever handle for on/off manual control so can be used to give your tool full air flow to total shut-off. Designed for use on all pneumatic circuits and features a quick connect/disconnect positive seal..
  • TEE PIPE FITTING - The tee fitting is T-shaped and has three openings to connect and branch three pipes, two on the main run and one branch at a 90-degree angle from the middle of the tee. It has 2 x 1/4” female and 1 x 1/4” male for connecting pipes. Pipe ....
Check Stock

KNIPEX Tools 37 13 125 Smooth Jaw Flat Nose Electronics Pliers, 5-Inch

  • Precision pliers for fine assembly work: electronics, fine mechanics, craft and jewelry wire applications.
  • For gripping, holding, bending and adjusting.
  • Tips precision ground, smooth gripping surfaces - will not scratch materials.
  • High-grade special tool steel, forged, oil-hardened.
  • Jaw length 1-Inch, Tip dimensions 5/64-Inch x 7/32-Inch, Head width 1/2-Inch x 7/64-Inch.
Check Stock

BronaGrand 10pcs Plastic Standard Couplers Pipe Tip Coupler Cake Decorating Couplers for Icing Nozzles,White

  • 【STANDARD COUPLERS SIZE】:These white couplers length is 3 cm/ 1.2 inches, diameter is 2.5 cm/ 1 inch at the base.fit for standard-size icing....
  • 【STURDY MATERIAL】:Cake decorating couplers are made of sturdy plastic,Non-toxic, tasteless, food-safe materials, durable and reusable..
  • 【EASY TO USE】:Cut a tiny hole in the bag corner, insert the coupler, then attach the tip and screw on the ring, after done, remove the tip and....
  • 【USABLE RANGE】:Standard coupler fits all decorating bags and standard tips, help you swap piping tips without unnecessarily wasting bags or....
  • 【PACKAGE QUANTITY】:Included 10 pieces pipe tip couplers,enough for your different usages..
Check Stock

CRAFTSMAN Plier Set, 25 Pieces, Durable and Versatile Pliers, Stainless Steel Blades (CMHT82625)

  • Pliers: COMFORT and CONTROL: Multi-zone bi-material grips.
  • Pliers: STRENGTH and DURABILITY: Made from drop forged steel.
  • Locking Pliers: ONE-HANDED OPERATION: With easy-release mechanism.
  • Locking Pliers: ADJUSTING SCREW: Controls the jaw opening and locking pressure.
  • 4 piece Snap Ring Set: VERSATILITY: 7-in pliers are designed for internal and external applications.
Check Stock

Teemico 24 Pack Plastic Standard Couplers Cake Decorating Coupler Pipe Tip Coupler for Icing Nozzles

  • Standard couplers: these white couplers are 3 cm/ 1.2 inch long, and their base' diameters are 2.5 cm/ 1 inch, fit for standard-size icing nozzles.
  • The standard coupler fits all decorating bags and standard-size tips, helps you change piping tips without unnecessarily wasting bags or frosting.
  • Simple to use: cut a tiny hole in the bag corner, insert this plastic coupler, then attach the tip and screw on the ring, after done, remove the tip....
  • Durable and practical: the pipe tip couplers are made of quality plastic, with sturdy construction, make you decorate cake and cookie conveniently and....
  • Package includes cake decorating couplers, enough for different usages, you can change similar sized tubes without emptying the contents of the....
Check Stock

TAISHER 4-Way Straight Air Manifold 5 Ports Aluminum Industrial Pneumatic Air Compressor Quick Connect Socket In Line Type Air Hose Splitter with 4 Couplers and 1\\/4 Male NPT Plug

  • 4-Way air manifold and Splitter with 1/4-inch couplers.
  • Durable and lightweight aluminum construction.
  • High corrosion resistance for longer life and smoother operation than standard couplers.
  • 1/4-inch body plug input with a 1/4-inch body industrial interchange couplers output.
  • Industrial interchange compatible with industrial, "m", "D" and "I/m" style plugs and couplers.
Check Stock