Best Adjustable Water Level Valve Kit

HTDAK 12 Inch (About 30cm) Toilet Fill Valve Silent Toilet Repair Water Saving Dual Flush Fittings Silent Split Toilet Valve Top Button Replacement Assembly

  • Toilet flush valve: for split toilets with top button, button hole diameter 3.8cm, drain hole diameter 6cm-7cm, measured tank height: 27cm-34cm, with tank cover height: 32cm-40cm.
  • Toilet filling valve: for toilets with bottom inlet, installation thread G15/16, adjustable range according to different tank heights: 27cm-34cm..
  • The double flush valve of the toilet can adjust the water level up and down to achieve full flush or half flush, and save water by adjusting the flush volume to reduce unnecessary expenses..
  • The toilet replacement valve kit is made of stainless steel, high-density carbon particle rubber, and high-quality silica gel: it has anti-corrosion, wear-resistant, rust-proof, leak-proof and other properties, and is suitable for operation under various water pressures and water quality..
  • The universal toilet replacement valve body is simple in structure, easy to replace, and only takes 10 minutes to install. It is easy to clean and maintain, so that your toilet components can continue to run smoothly..
Check Stock

Bucket of Air

  • 2-in-1 Unique Design: Combines Deep Water Culture & top feed recirculating drip.
  • Uses a dual outlet air pump, so it aerates your reservoirs from two points for vigorous, explosive DWC root growth, while also providing a recirculating top feed drip system.
  • Powerful Air Pump: Air output: 25L/min. (adjustable).
  • Comes with strong air pump to oxygenate your water and encourage root growth.
  • Pumps raw air into the nutrient solution through air hoses at the bottom of the bucket.
  • Easy to Assemble and Use: With the easy-to-follow guidance of the manual, you can enjoy fast, easy installation.
  • The equipped clay pebbles keep the plants' roots dry and provide solid support.
  • The built-in floating red ball clearly indicates water level so you know when to refill.
  • Wide Range of Applications: This complete hydroponic bucket system easily fits inside grow tents, open areas inside the gardens, on balconies, or in offices, garages, homes, or basements.
Check Stock

304 Stainless Steel Balanced Float Ball Valve Tank Mount 100 Psi 1 inch NPT Male…

  • Balance pressure between piston and Valve, as well as smaller ball and shorter rod can bear high pressure..
  • Adjustable water level. Ball valve is used in pipelines to cut off, distribute and change the flow direction of the medium Widely used in magnetic level switch and liquid level measurements..
  • Made of 304 stainless steel. Its applicable medium is water, can withstand wide temperature of -10℃ to 120℃.
  • Stainless Steel Rod for Float Valve, 1/4" thread, 6.3" Length, and 4" Stainless Steel Float.
  • Works great for water trough, water pump, humidifier, fountain, aquarium, pond, chicken/dog/horse/cattle waterer, etc.
Check Stock

R&T A2422M 3\ Dual Flush Valve with Push Button Dual Flush Toilet Repair Kit Toilet Tank Parts Replacement for 2-piece Toilet

  • 【Enhance Your Toilet's Performance】Fix a leaking toilet with 3" (80 mm) drain outlet and turn into a powerful flushing. Using together with R&T fill valve & tank to bowl gasket and bolts will make your toilet flush like new again. Please note: fill valve, gasket and bolts kit are sold separately..
  • 【Water-Saving】The 3 in. (80 mm) dual flush valve provides optional full flush for powerful flushing and half flush for water-saving flushing which reduces your bill. Lighter pushing force, more convenient for elder and children..
  • 【Easy Installation & Adjustment】Easy installation without tools. Adjustable overflow tube to fit different tank heights(11.22"-15.15"), half and full water level adjusters to control water consumption..
  • 【Modern Top Mount Dual Push Button】Endurable chrome ABS, fits dual flush toilet with 48mm mounting hole on ceramic lid..
  • 【Warranty】Direct supply from global leading manufacturer,backed by 5 Years Warranty..
Check Stock

Watts Tankless Water Heater Service Valve Kit

  • TANKLESS WATER HEATER VALVE KIT: Watts LFTWH-FT-HCN service valve kit for tankless water heater valves simplify the installation, maintenance and operation of tankless water heaters..
  • SERVICE VALVE KIT FOR TANKLESS WATER HEATER: The tankless water heater service valve kit replaces up to 18 fittings and 16 connections used in typical tankless water heater installations, color-coded tee handle. Optional pressure relief and check valve..
  • MULTIPLE CONNECTION VALVE KIT: They are available in two valve sets or as a single valve with female threaded, union or quick-connect end options. The service valve kits are available with or without a relief valve. Facilitate service and maintenance with cold water inlet and hot water outlet valves certified to NSF/ANSI 61..
  • LEAD FREE VALVE KIT: The wetted surface of our Lead Free products contacted by consumable water contain less than one quarter of one percent (0.25 percent) of lead by weight..
  • WATER SERVICE VALVE KIT: Purge/drain ports allow regular cleaning to remove scale build-up. The kit includes LF4L - Lead free poppet type pressure relief valves for protection against excessive pressure and LFTWH - Lead Free Tankless Water Heater Valves..
Check Stock

SAMODRA Silent Toilet Fill Valve Adjustable Water Level, High Performance Toilet Flush Valve Replacement Kit Anti-Siphon Water-Saving, Installs in Minutes

  • 【Fill Valve Reformer】Samodra toilet fill valve designed to fix no/slow refilling, running & noisy toilets, the fill valve is quieter than other fill valves (Noise003c45 DB)..
  • 【Effectively Water-Saver】Professional delay design, doesn't permit fill valve to turn on until the flapper closes, ensure that the displacement is not affected by water pressure. Annual water saving reaches 965 gal ~2893 gal..
  • 【Easy to Adjust】Rotate the top cover, the fill valve height and tank water level will be adjusted together, easy and convenient. Adjustable height: valve body (8.8'' - 12.5''), water level (5.9" - 9.5")..
  • 【Installs in Minutes】Simply remove the old fill valve or ballcock, insert the new Samodra fill valve, then tighten locking-nut and attach refill tube to overflow. Suitable for all old & modern toilet models..
  • ★★★★★30-DAY MONEY back guarantee, 2-YEARS quality warranty and life-time premium Samodra customer service, please don't hesitate to contact us for any inquiries..
Check Stock

Futurama Volume Four

  • TANKLESS WATER HEATER VALVE KIT: Watts LFTWH-FT-HCN service valve kit for tankless water heater valves simplify the installation, maintenance and....
  • SERVICE VALVE KIT FOR TANKLESS WATER HEATER: The tankless water heater service valve kit replaces up to 18 fittings and 16 connections used in typical....
  • MULTIPLE CONNECTION VALVE KIT: They are available in two valve sets or as a single valve with female threaded, union or quick-connect end options. The....
  • LEAD FREE VALVE KIT: The wetted surface of our Lead Free products contacted by consumable water contain less than one quarter of one percent (0.25....
  • WATER SERVICE VALVE KIT: Purge/drain ports allow regular cleaning to remove scale build-up. The kit includes LF4L - Lead free poppet type pressure....
Check Stock

MACGOAL 1/2 Inch Brass Valve with Plastic Float Water Float Valve with Adjustable Arm Automatic Fill Float Ball Valve for Water Tank Fountains Livestock Waterer

  • NO LEAK: Rubber washer ensures a tight, leak free kit.
  • DURABLE MATERIAL: This water float valve features high quality brass valve with a plastic float.
  • EASY TO USE: 1/2" thread, very easy to install and adjust water level, you can adjust the water level by rotating the metal wingnut or the green float.
  • MULTIPLE USES: Works great for water trough, water pump, water tank, fountain, pond, toilet cistern, livestock and poultry water dispensers, etc.
  • WE ARE HERE TO HELP: We always stand behind our products, feel free to contact us if you need any help with this 1/2 inch copper valve..
Check Stock

Unisex Adult Steampunk Gas Mask Costume Accessory, Gold, One Size

  • TANKLESS WATER HEATER VALVE KIT: Watts LFTWH-FT-HCN service valve kit for tankless water heater valves simplify the installation, maintenance and operation of tankless water heaters..
  • SERVICE VALVE KIT FOR TANKLESS WATER HEATER: The tankless water heater service valve kit replaces up to 18 fittings and 16 connections used in typical tankless water heater installations, color-coded tee handle. Optional pressure relief and check valve..
  • MULTIPLE CONNECTION VALVE KIT: They are available in two valve sets or as a single valve with female threaded, union or quick-connect end options. The service valve kits are available with or without a relief valve. Facilitate service and maintenance with cold water inlet and hot water outlet valves certified to NSF/ANSI 61..
  • LEAD FREE VALVE KIT: The wetted surface of our Lead Free products contacted by consumable water contain less than one quarter of one percent (0.25 percent) of lead by weight..
  • WATER SERVICE VALVE KIT: Purge/drain ports allow regular cleaning to remove scale build-up. The kit includes LF4L - Lead free poppet type pressure relief valves for protection against excessive pressure and LFTWH - Lead Free Tankless Water Heater Valves..
Check Stock